Flow: 180 l/h - 30,000 l/h
Power: 1.5 kW - 15 kW
... br>6. Mechanical seals: single-end face or double-end face mechanical seals
7. Equipped with a sanity-grade
stainless
steel protective cover
8. Equipped with a mobile trolley
9. Equipped ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0.3 m³/h - 90 m³/h
Pressure: 85,000 Pa
Power: 0.55 kW - 75 kW
... MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 300 l/h - 86,400 l/h
Power: 0.55 kW - 37 kW
Input diameter: 25 mm - 150 mm
... VISCOSITY MATERIAL FEEDING
PUMP
The medium viscosity can reach 1,000,000CP fed by this
pump
2.THIN MEDIUM FEEDING
PUMP
If the viscosity of the fed medium descends and leakage increases, driving ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 0.0001 l/min - 0.009 l/min
Pressure: 0 bar - 1.5 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0 l/min - 0.009 l/min
Pressure: 0 bar - 3 bar
Power: 6.4 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2521X1 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 0.0003 l/min - 0.018 l/min
Pressure: 0 bar - 3 bar
Power: 3 W
... Dosing pump for analytical instrumentation The compact micro annular gear pump mzr-2921 of the low pressure series is an innovative pump concept for use in analytical ...
HNP Mikrosysteme GmbH
Flow: 246 l/min - 510 l/min
Pressure: 40 bar - 240 bar
Power: 30 kW - 110 kW
... large high-pressure pump is equivalent to two small high-pressure pumps working in parallel (referring to the same lift and flow rate), and the efficiency of the large high-pressure pump ...
Tinajin Harvest
Flow: 5.94 m³/h - 14.46 m³/h
Pressure: 18 MPa - 70 MPa
Power: 90 kW - 255 kW
... high pressure pumps are new medium, low pressure and large flow pumps developed by our company with a maximum working pressure of 700bar. The power end matches a variety of transmission ratios, the maximum input power ...
Tinajin Harvest
Flow: 6.96 m³/h - 19.08 m³/h
Pressure: 18 MPa - 70 MPa
Power: 90 kW - 255 kW
... The overall independent research and development, medium and low pressure and large flow, plunger stroke valve group vertical conical structure, power end matching multi-speed ratio, large crankshaft thrust, wide range of applications ...
Tinajin Harvest
Flow: 0.00006 m³/h - 0.06 m³/h
Pressure: 0 bar - 150 bar
Power: 0.5 kW - 0.5 kW
... pressure in the pump: 15 MPa up to 1000 ml/min
ECOM
Flow: 0.001 l/min - 10 l/min
Pressure: 40 MPa
Width: 280 mm
... must be ordered together with the pump. With a flow rate of 0.001-10.00 ml/min and a pressure limit at 40 MPa is this pump suited for analytical applications in liquid chromatography. The pump is designed ...
ECOM
Flow: 0 l/min - 0.01 l/min
Pressure: 40 MPa
Power: 100 W
... the power voltage and RS232, and the pump is ready to work. When working with buffered solvents, it is possible to backwash the pistons. Pump is supported with software ECOMAC and Clarity. ECP2010 OEM PUMP ...
ECOM
Flow: 0.5 l/min - 18 l/min
Pressure: 0.3 bar - 6.5 bar
Head: 40.5 m - 49.5 m
... ); Impeller — CuZn (brass); Shaft — AISI 420 stainless steel.
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
... MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or ...
Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m
... Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining circulating ...
Flow: 11.1 m³/h
Head: 10.1 m
Power: 9 kW
... insulation. They are designed for S1 (continuous) service. SUBMERSIBILE PUMPS IN STAINLESS STEEL AISI 316, DUPLEX SUPER DUPLEX, HASTELLOY, ALLOY The submersible electric pumps in stainless ...
FAGGIOLATI PUMPS
Flow: 90.4 m³/h
Head: 30.6 m
Power: 27 kW - 28.8 kW
... insulation. They are designed for S1 (continuous) service. SUBMERSIBILE PUMPS IN STAINLESS STEEL AISI 316, DUPLEX SUPER DUPLEX, HASTELLOY, ALLOY The submersible electric pumps in stainless ...
FAGGIOLATI PUMPS
Flow: 81.8 m³/h
Head: 7.5 m
Power: 3 kW - 3.7 kW
... insulation. They are designed for S1 (continuous) service. SUBMERSIBILE PUMPS IN STAINLESS STEEL AISI 316, DUPLEX SUPER DUPLEX, HASTELLOY, ALLOY The submersible electric pumps in stainless ...
FAGGIOLATI PUMPS
Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel ...
Enfound enterprise co.,ltd
... problem with stainless steel or cast iron materials. 3. Discharge/suction flanges are using adhesive to connects to the pump. It will solve leakage or damage problems caused by connection to the thread ...
Enfound enterprise co.,ltd
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel ...
Enfound enterprise co.,ltd
Flow: 1 l/min - 2.5 l/min
Pressure: 0.5 bar - 5 bar
Power: 0.03 kW - 0.03 kW
... The MPD025 is a miniature external gear pump with a DC brushed motor. Typical materials include SS316L machined casing (304 or PPS options depending on model), PEEK gears, FKM (fluorine rubber) sealing ring and dynamic ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 1 l/min - 1.5 l/min
Pressure: 0.5 bar - 20 bar
Power: 0.07 kW
... 316L or ceramic shaft) and
pump body materials (304, 316L, PPS) allow fluid compatibility and customization.
Model Specification
Model: MPB 015 B A A A 24V 70W
Configuration digits: 1 2 3 4 5 6 7 8
1
Pump ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 15 l/min
Pressure: -0.85 bar - 10 bar
Power: 0.4 kW
... Model: MPB 150 B A D A 24V 400W
Position map (by column):
1:
Pump Series = MPB (Rubber O-Ring Seal)
2: Model/Displacement = 150 (5.4 ml/rev; maximum flow rate 10 LPM)
3:
Pump Body = A: 304; B: 316L; C: PPS; ...
Zhuhai Chenhui Technology Co., LTD.
Flow: 0 l/min - 50 l/min
Head: 0 m - 470 m
Power: 0.37 kW - 6.3 kW
... Available motor power: from 0.37 to 6.3 kW
STAC S.r.l.
Flow: 0 l/min - 600 l/min
Head: 2 m - 25 m
Power: 1.1 kW - 2.2 kW
... Construction and materials
- Casing, impeller and pump body in stainless steel AISI 4.5 alloy
- Motor shaft in stainless steel Inox AISI 420
- Screws
STAC S.r.l.
Flow: 0 l/min - 300 l/min
Head: 1.2 m - 19 m
Power: 0.37 kW - 1.1 kW
... material: Inox G AI 9
STAC S.r.l.
Pressure: 0 bar - 150 bar
... volumetric pumps are designed for high-precision dosing processes. Thanks to tight manufacturing tolerances, they ensure flow accuracy and repeatability over time, even in the most extreme conditions. These pumps, featuring ...
DAV TECH Srl
Pressure: 0 bar - 150 bar
... volumetric pumps are designed for high-precision dosing processes. Thanks to tight manufacturing tolerances, they ensure flow accuracy and repeatability over time, even in the most extreme conditions. These pumps, featuring ...
DAV TECH Srl
Pressure: 0 bar - 150 bar
... volumetric pumps are designed for high-precision dosing processes. Thanks to tight manufacturing tolerances, they ensure flow accuracy and repeatability over time, even in the most extreme conditions. These pumps, featuring ...
DAV TECH Srl
Flow: 0 l/min - 120 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 250 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 l/min - 1,050 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... To determine the compressed air needed and the size of a FLUIMAC pump, two types of information are mandatory: The required flow rate of the fluid (Flow rate l/min) The total prevalence (Head H) By determining the flow rate of ...
FLUIMAC
Flow: 0 m³/h - 13.2 m³/h
Pressure: 0 bar - 8 bar
Head: 2 m - 8 m
... operated diaphragm pump is an environmentally friendly alternative to the traditional air-operated diaphragm pump. It is designed for gentle pumping of the most aggressive media, including those containing abrasive particles. This ...
Tapflo
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
... CTI INDUSTRIAL PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material - AISI 316L stainless ...
Tapflo
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
... CTH HYGIENIC PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material - AISI 316L stainless ...
Tapflo
Flow: 20 l/min
Pressure: 4 bar
Power: 125 W
... "Diaphragm pumps are membrane-type positive displacement pumps that use a membrane made of rubber or fluororesin. The compact, lightweight design makes them easy to install in other equipment and it is also highly airtighted. ...
... counterclockwise) Gear made of cast iron with a protective coating with epoxy paint box AISI 316 stainless steel shaft, rotor and pump body AISI 316 stainless steel ...
Ekin Industrial
Flow: 70, 100 m³/h
... in vacuum tanks, healthy system efficiency is maintained. These pumps, which are especially preferred in many dairy factories, are often referred to as stainless milk pumps. The most ...
Ekin Industrial
Pressure: 20 bar
... displacement pumps do not have. Such as constant flow, high pressure, wide speed range. After the use of the double screw pump, other auxiliary pumps, valves and control units will be eliminated. With ...
Ekin Industrial
Flow: 5 l/min
Pressure: 7, 315 bar
Weight: 60 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available in different ...
LARIUS SRL
Flow: 180, 380, 550, 1.3 l/min
Pressure: 7, 3, 5 bar
Weight: 16 kg
... maximum efficiency; the L400 manual spray gun, compact and easy to handle, guarantees a reduced over spray and a high production volume thanks to the airless spraying assisted by a low pressure air jet. The L400 manual ...
LARIUS SRL
Flow: 3.8, 400, 800, 850 l/min
Pressure: 210, 5, 3, 7 bar
Weight: 25 kg
... maximum efficiency; the L400 manual spray gun, compact and easy to handle, guarantees a reduced over spray and a high production volume thanks to the airless spraying assisted by a low pressure air jet. The L400 manual ...
LARIUS SRL
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... inverter allows 4HS to: Change pump speed to maintain set-pressure regardless of water demand. Consequently the pump is operated only when and as needed without wasting energy, thereby extending pump ...
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... Removable power cable. Water level sensor. Helical rotor pump. NERA pumps are equipped with a helical rotor that moves within a double helix rubber stator. The rotor is made of AISI 304 stainless ...
Flow: 2 m³/h - 215 m³/h
Power: 1.5 kW - 37 kW
Weight: 9.4 kg - 186 kg
... any pump driven by a three-phase motor. Pump speed is constantly adapted to available solar irradiation thus maximising the amount of pumped water and making possible operation even in conditions of low sunlight. It ...
Flow: 1.3, 2, 2.7, 0.9 m³/h
... and 2 comprising: 1 metre 3/4” stainless steel pipe 2” bung 2 metre discharge Ø 25 hose Spout Stainless steel elbow Suction pump 3 ...
Pompes Japy
Flow: 1.3, 0.9, 2 m³/h
... 3/4” stainless steel pipe 2” bung 2 metre discharge Ø 25 UPE hose Spout Stainless steel elbow Characteristics More Information FLUID Water, Diesel, Oil, Solvent TECHNOLOGY ...
Pompes Japy
Flow: 2.6 m³/h
... Reversible rotary manual pumps made of 316 stainless steel Descriptive Construction materials Body, cover, rotor, screws and bolts of the body: 316 stainless steel Vanes: ...
Pompes Japy
Flow: 10 l/min - 1,600 l/min
Pressure: 17 bar - 210 bar
Head: 40 m
... products from “skimmers” into the sea and lakes SP35 is a 3 hydraulic waste pump for clear and heavily loaded liquids, impeller and shell are made in stainless steel. The pump produce ...
Flow: 30 l/min - 3,000 l/min
Pressure: 17 bar - 210 bar
Length: 400 mm
... without damage indefinitely • The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber • Can be operated by small power pack or by the hydraulic circuit ...
Flow: 30 l/min - 3,000 l/min
Pressure: 17 bar - 210 bar
Head: 16 m
... without damage indefinitely • The pump housing can be open in few minutes without tools for inspection of the impeller and the pumping chamber • Can be operated by small power pack or by the hydraulic circuit mini ...
Flow: 600 l/h
Pressure: 0.3 bar - 2.5 bar
Power: 65 W
... - Full PTFE bellows pump - Pump head can be rotated in 90° steps and connected to the gas line from the top or side - Max. capacity: approx. 10 Nl/min with a counter-pressure of ±50 mbar on the vacuum ...
Flow: 10 l/min
Pressure: 0.3 bar - 2.5 bar
Fluid temperature: 180 °C
... - Analytical diaphragm pump for hot gas measurement - Pump head electrically heated up to +180 °C [+356 °F] - With high-temperature limiter and low-temperature alarm function - Max. capacity: 10 Nl/min at +180 °C [+356 ...
Flow: 0.1 l/min - 1.8 l/min
Pressure: 15 bar
... tempered stainless steel. Other parts are made in light weight metal. A «state of the art» parts finishing in addition to some hightech surface treatments - friction free - increase the pump life span, ...
POMTAVA SA
Flow: 0.1 l/min - 2 l/min
Pressure: 15 bar
... with the product are made in tempered stainless steel. Other parts are made in light weight metal. A «state of the art» parts finishing in addition to some hightech surface treatments - friction free - increase the pump ...
POMTAVA SA
Flow: 0.1 l/min - 2 l/min
Pressure: 100 bar
Fluid temperature: 135 °C
... The body, the center plate and gears, the rear cover, the drive shaft and the idler shaft are in tempered stainless steel. The pump seal is made up of combined sealing methods (liquid barrier and chevron ...
POMTAVA SA
Pressure: 8 bar - 240 bar
Weight: 23 kg
... materials Easy operation and maintenance of the unit Fast start-up of the pump with very low air input Easy handling. The WIWA INJECT HD 4 and HD 5 are pneumatic 1K piston pumps characterized by large output and ...
Pressure: 200 bar
Weight: 55 kg
... 14025 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor, so no mixing errors can occur due to the positive control. The unit is equipped with a flushing pump ...
Pressure: 32 bar - 136 bar
... Fast and service friendly maintenance With the WIWA 4-ball pumps, you can convey even the most difficult materials. Fields Of Application Paint circulation systems Feed pump Feed pumps Release ...
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. They feature a unique seal-less design with a double ...
MOUVEX
Flow: 0 l/s - 0.207 l/s
Pressure: 20 psi - 90 psi
Fluid temperature: 34 °F - 120 °F
... bar) Ultimate performance and reliability with extended service life Built-in auto shutoff, automatically shuts off pump when bag is empty and restarts when a full bag is connected Easy installation with all quick disconnet ...
FLOJET
Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm
... lubricator and pressure regulator unit, lightweight fluid reservoir, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include stainless steel ...
Hi-Force Hydraulic Tools
Flow: 23.9 l/min - 35.4 l/min
Pressure: 5, 10 bar
Power: 0.2 kW - 1.6 kW
... (Viton available on request). Parts in contact with spray liquid: polypropylene and AISI 316-L stainless steel on P 36/10, polyamide and stainless steel on P 36/15. On request: regulation valve. ...
COMET Spa
the best suppliers