... The TG-900 is a coating thickness gauge manufactured by Tecpel. The unit instantly holds reading when its sensor leaves the surface. It also immediately measures thicknesses of ferrous material when the sensor is ...
... The TG-902 model is manufactured by Tecpel, and is a coating thickness gauge with 2-point calibration. It is simple and easy to utilized due to its one hand operation. It has a range of 0 to 40.0 mils and resolution of ...
Measuring range: 0 mm - 63.5 mm
... Coating Thickness Gages for ALL Metal Substrates Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness ...
DeFelsko Corporation
Measuring range: 13 µm - 7,600 µm
Measurement accuracy: 2 µm
Measurement width: 66 mm
... Coating Thickness Gages for Non-Metal Substrates Non-destructively measures a wide variety of applications using proven ultrasound technology. Measure coating thickness over wood, concrete, plastic, ...
DeFelsko Corporation
Measuring range: 20 µm - 100 µm
Measurement accuracy: 5 µm
Resolution: 1 µm
... Non-contact Uncured Powder Thickness Gage Affordably measures uncured powder coatings using non-contact ultrasonic technology to predict a cured thickness • Dedicated stand-alone unit is ready to ...
DeFelsko Corporation
Measuring range: 0 mm - 1 mm
... • With a lifting device • Factory standard • Frame is made of alluminium alloy • Revolution counter ...
Measuring range: 1 mm - 300 mm
Measurement accuracy: 0 mm - 0.1 mm
Weight: 175 g
... UT345A is an intelligent ultrasonic thickness gauge that adopts the latest high-performance and low-power consumption microprocessor technology. Based on the principle of ultrasonic measurement, it can measure the thickness ...
UNI-TREND TECHNOLOGY (CHINA) CO., LTD.
Measuring range: 0.02 in - 20 in
... Features: Wide measurement range: 5MHz probe: 0.040" to 20" of steel 10MHz probe: 0.020 to 20" of steel (optional) Sunlight readable dot-matrix display with backlight Multiple transducer options for high temperature and difficult to measure materials Fast ...
Extech
... recording each revolution of large hand •Furnished in attractive, protective case Specifications •Type: Pocket Dial Gage •Range (in): .375" •Graduations (in): .0005" •Dial Reading: 0-50-0 •Throat Depth (in): 1/2" ...
STARRETT
Measuring range: 0 mm - 50 mm
... The TGD 3000 thickness gauge is a cost efficient and easy to use instrument for measuring the thickness of rubber of rubber-like materials. The constant force enables repeatable readings. A ...
Measuring range: 0 mm - 300 mm
Measurement accuracy: 3 µm - 95 µm
Resolution: 0.001 µm
... resolution. It’s possible to manufacture any size of thickness gauge according customers request with special measuring anvils and measuring force All MICROTECH thickness ...
MICROTECH
Measuring range: 0 mm - 50 mm
Weight: 72 g
Ambient temperature: 0 °C - 40 °C
... Using a combi-probe, the layer thickness tester, Testboy 72, reliably measures all insulated coatings on magnetic and non-magnetic metallic surfaces. Thereby, switching is carried out automatic. The integrated measurement value memory ...
Testboy
Measuring range: 0 mm - 10 mm
Measurement accuracy: 0.005, 0.02 mm
... ■ Ceramic anvil ■ Buttons: on/off, zero, mm/inch ■ Automatic power off ■ Data output(cable code:200-03 or 200-04) ...
Measuring range: 1 mm - 250 mm
... Multigauge 6000 Drone Thickness Gauge has been designed specifically to mount onto a drone or UAV. This new technology has already had many successful installations on various models of drone and this is the first dedicated ...
Tritex NDT
Measuring range: 0.1 mm - 50 mm
... Thickness Dial Gauges | mechanical Dial Thickness Gauges are used for measuring the thickness of a very wide range of materials such as leather, paperboard, ...
Käfer Messuhrenfabrik
Measuring range: 0 mm - 10 mm
Resolution: 0.5 µm - 10 µm
... protection lithium battery, battery life is greater than 1 year •Three types of probes are available •Measure the thickness of jewelry, leather, metal sheet, paper, film, rubber, fabric and various metal plates, glass plates, etc. ...
... production changes Measuring data for production control Measuring method The thickness gauge THICKNESSCONTROL LT measures the material thickness by contactless ...
Fagus-GreCon
... power/utility, food, automotive, and marine industries. Thickness is clearly marked every 6″ in metric and decimal. Measures 1/2″ wide by 25′ long by 0.0005″ thick . Precision Brand® Feeler Gage is used in manufacturing ...
... PowderTAG measures powder coating thickness before and after cure, non-contact and non-destructive. A sophisticated combination of specific powder-, infrared- and photo-thermal techniques measures the thickness of powder ...
TQC Sheen BV
Measuring range: 15 µm - 1,500 µm
Measuring rate: 4,000 Hz
... infrared light to carry out highly precise, non-contact measurements of the wall thickness of non-transparent or opaque plastics. Advantages • Plastic wall thickness measured The CHRocodile 2 K optical sensor uses ...
PRECITEC OPTRONIK
... solved quickly and reliably. The DFT is the handheld device for the simple layer thickness measurement on steel and non-ferrous metals. The DPM with integrated measuring probe is used to measure and record all climate ...
HELMUT FISCHER GMBH - INSTITUT FÜR ELEKTRONIK UND
Measuring range: 1.2 mm - 200 mm
... Ultrasonic thickness gauge – SA8812 The ultrasonic thickness gauge is a non destructive testing device used to measure thickness of ultrasonic conducting ...
S.A.M.A. ITALIA SRL
... electromagnetic measuring process for the quality control of cold and hot rolled strips and sheets. Fast evaluation of measuring values and high accuracy. For use in extreme conditions, measurements unaffected by emulsions, ...
... base material and also impresses when measuring thin layers with very low measurement uncertainty. The MMS® Inspection DFT is part of the three-part MMS® Inspection corrosion kit, the Fischer handheld measuring gauges ...
Measuring range: 0 mm - 15 mm
Ambient temperature: -10 °C - 60 °C
... by the sensor for quick results • Durable sensors for a long service life • Diverse range of applications for measuring coating thickness up to 35mm • Graphic menus and guide texts in 20 languages – ideal for use in ...
ElektroPhysik Dr. Steingroever GmbH & Co. KG
... semiconductors, such as silicon wafers. Thickness is measured as the material under measurement passes through the gap formed between two opposing gap sensors. The CL-2400 can be used for static or running thickness measurements. ...
Onosokki
... QNix® 9500 The coating thickness gauge to measure the thickness of coating on metal Over the last three years a coating thickness gauge has been developed, that is ...
Automation Dr.Nix
... eliminate all operator dependent variations in the data. Product Overview The ECV Pro system is the industry standard for measuring active carrier concentration profiles in semiconductor layers. The system’s newly designed digital ...
Onto Innovation Inc.
the best suppliers