Two-stage gear reducers

Torque: 0.65 Nm - 0.8 Nm

maxon GPX gearheads combine extremely high power transmission with a very short construction. The modular design provides the basis for a customer-specific solution. Planet gears with shifted tolerance ...

Torque: 0.7 Nm - 2 Nm

maxon GPX gearheads combine extremely high power transmission with a very short construction. The modular design provides the basis for a customer-specific solution. The gearhead's ceramic components make it suitable ...

Torque: 2.4 Nm - 3.7 Nm

maxon GPX gearheads combine extremely high power transmission with a very short construction. The modular design provides the basis for a customer-specific solution. The reinforced output makes transmission of very high ...

Torque: 15,000 Nm - 80,000 Nm
Power: 5.5 kW

... to 5.5 kW, a two-stage helical bevel gear unit and a NORDAC LINK frequency inverter which is installed close to the motor. The extruder flanges can safely absorb the forces involved ...

Torque: 15,000 Nm - 250,000 Nm
Power: 1.5 kW - 4,000 kW

The helical gear version of the MAXXDRIVE Industrial Gear Unit is manufactured according to the proven UNICASE principle and is available in all sizes. Because of this design, mixer drives can often be ...

Torque: 12 Nm - 480 Nm
Rotational speed: 2,600 rpm - 6,000 rpm

... Series manufactured by Varvel is a low-backlash planetary reducer that was specifically developed for two and three stages. They have hardened and tempered steel casing and broached internal ...

Torque: 17 Nm - 683 Nm
Rotational speed: 300 rpm

Its short design makes the GSD line the ideal high-end gearbox for space restricted applications. The output flange for robotics produces highest torsional rigidity. The low standard backlash of the GSD line makes it ...

Torque: 15 Nm - 1,266 Nm
Rotational speed: 3,000 rpm - 10,000 rpm

... high precision. Helical gears ensure a minimum noise level and smooth running. The right angle shape makes the GSBL line the perfect match for all dynamic applications where space is limited – in the 2-stage ...

Torque: 26 Nm - 182 Nm
Rotational speed: 4,500, 3,000, 8,000, 4,000, 7,000 rpm

The GSN economy line is the perfect match for applications where a backlash of 10 arcmin or better is required. Its helical gears ensure a minimum noise level and a smooth running. The full needle bearing allows for torques ...

Torque: 10 Nm - 69,000 Nm
Power: 1,400 kW

... collected and can be reused in power plant processes. FLENDER Gear Units are thus designed exclusively for condensing turbines in power plants. The presence of a fan mounted on two-stage ...

Torque: 1,050,000 Nm
Power: 2,000 kW

Mining companies lose time and money. We are changing that. Operating costs, energy requirements, safe and reliable operation, and productivity are the decisive factors for the success of a mine. Our promise: with FLENDER® drives you ...

Power: 8,000 kW

... foundation via a thrust bearing and the gear housing. This is why the special requirement made on a gear unit for vertical mills is its reliability. And for this reason, the worldwide tried and tested ...

Torque: 0 Nm - 1,000,000 Nm
Power: 550 kW

... tolerances in all of the gears and floating planet carriers allow the load to be evenly shared by all the components. Spline profiles on the gears allow them to handle even larger loads. The all-roller ...

Torque: 190 Nm - 320 Nm

... cycloidal gears of the RF-P series set new standards for high-speed applications in a compact space. They enable output speeds of up to 200 rpm and operate with extremely high precision (hysteresis loss < 2 arcmin). The ...

Torque: 2, 160 Nm

Industry compatible high performance planetary gearbox Protection class IP 65 standard (excluding output shaft) High efficiency Output shaft with double ball bearings

Torque: 25, 150, 40, 100 Nm

Industry compatible high torque planetary gearbox Protection class IP 65 standard (excluding output shaft) High efficiency Output shaft with double ball bearings

Torque: 11.083 ft.lb - 282.8551 ft.lb

PLQE Economy planetary gearbox Our PLQE is uncomplicated and powerful. It can be connected directly to your installation without the need for an intermediate flange. The large deep groove ball bearing at the output ...

Torque: 3.33 Nm - 383.5 Nm

... by the Economy Line. With its compact, but powerful design, it is ideal for dynamic multiple axis systems. Our right angle gearbox features lifetime lubrication, is easy to install, all this at an unrivalled price-performance ratio.

Torque: 0.5 Nm - 11 Nm
Rotational speed: 5,000 rpm

Standard motor output dimension Motor shaft Ø 4x20. Permanent greasing. Normaly the gearboxes are shiped in the standard dimenson like the drow. Is possible to have different meccanical dimension accordin ...

Torque: 0.7 Nm - 16 Nm
Rotational speed: 5,000 rpm

Standard motor output dimension Motor shaft Ø 6x23. Permanent greasing. Normaly the gearboxes are shiped in the standard dimenson like the drow. Is possible to have different meccanical dimension accordin ...

Torque: 0.7 Nm - 16 Nm
Rotational speed: 5,000 rpm

Standard motor output dimension Motor shaft Ø 6,35x20. Permanent greasing. Normaly the gearboxes are shiped in the standard dimenson like the drow. Is possible to have different meccanical dimension accordin ...

Torque: 0 Nm - 361 Nm
Rotational speed: 0 rpm - 8,000 rpm

As a medium-sized gear manufacturer, we can now look back on more than 75 years of tradition. For more than 30 years, everything has been 'rotating' for us around right-angled power transmission. Then as now. we are driven ...

Torque: 12 Nm - 1,850 Nm
Rotational speed: 1,500, 2,000, 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SPL gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Torque: 32 Nm - 1,050 Nm
Rotational speed: 2,000, 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SPH gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Torque: 32 Nm - 1,850 Nm
Rotational speed: 1,500, 2,000, 3,000, 4,000 rpm

... highly successful high precision gearbox series. All SVX gears adopt the alloy forged steel as the raw material, the powerful heat treatment, the latest helical gear design, full needle ...

Power: 0.8 kW - 8,000 kW

EP Series Helical Gearbox Power Range 0.8 KW to 8000KW Stage Single / Double / Triple / Quadruple Reduction Ratio Range 1.6/1 to 630/1 Output Shaft Solid / Hollow Additional ...

Power: 0.7 kW - 2,850 kW

... Helical Parallel Shaft and Bevel Helical Right Angle Shaft hardened and flank ground Gear Units. Gear units are available in Single, Double, Triple & Quadruple stages. Gearbox ...

... Crane Duty Gearbox Stage Double/ Triple/ Quadruple Drives Main Hoist/ Cross Travel/ Long Travel Reduction Ration 1.6/1 - 300/1 Mounting Horizontal/ Verticle Lubrication Forced Lubrication ...

Torque: 55 Nm - 6,135 Nm
Rotational speed: 0.05 rpm - 2,000 rpm
Power: 0.01 kW - 30 kW

RV-E Precison Cycloidal Gear The RV-E series precision cycloidal gear reducer provides high-end performance in a very compact and highly rigid component type configuration. The gearbox ...

Torque: 25 Nm - 36,800 Nm
Rotational speed: 15 rpm - 400 rpm
Power: 0.25 kW - 132 kW

The VARITRON® Cycloid Drive unique cycloid gear design has advantages superior to speed reducers using common involute tooth gears. The key to VARITRON®'s Cycloid Drive matchless performance ...

Torque: 65 Nm - 12,260 Nm
Rotational speed: 0.05 rpm - 2,000 rpm

RV-C Precison Cycloidal Gear The RV- C series precision cycloidal gear reducer provides high-end performance in a very compact and highly rigid component type configuration. The gearbox ...

... jacket and internal ring gear. The sun gear, central gearbox gear, transmits the motion to three or more gears that revolve around it. The gears, ...

Torque: 90 Nm - 4,820 Nm
Rotational speed: 950 rpm - 14,000 rpm
Power: 0 W - 160,000 W

Please directly contact our technical and sales team to get more details regarding this product.

Torque: 110 Nm - 7,500 Nm
Rotational speed: 3,500 rpm - 8,000 rpm

The KS TwinGear helical bevel gearbox is a high performance and precision gearbox. This two-stage gearbox available in ratios up to 75:1 is very space-efficient and suits ...

Torque: 10,000 Nm - 2,000,000 Nm

... and more Gear ratios 4 - 48 Servox® Z A two-stage Servox® Z drive is available for even higher ratios and a coaxial design. Based on the standard Servox® E drive, a second planetary ...

Torque: 315 Nm - 14,010 Nm
Rotational speed: 1,600 rpm - 5,500 rpm

... Ratios: 2-stage : 22 / 27.5 / 38.5 / 55 3-stage : 88 / 110 / 137.5 / 154 / 220 / 385 4-stage : 440 / 550 / 770 / 1078 / 1540 / 2695 / 3850 / 5500 Low backlash 2-stage ...

Torque: 370 Nm - 13,875 Nm
Rotational speed: 2,100 rpm - 5,000 rpm

... 13,875 Nm Ratios: 1-stage : 5.5 2-stage : 22 / 27.5 / 38.5 / 55 3-stage : 88 / 110 / 154 / 220 Low backlash 1-stage : ≤1arcmin 2-stage : ≤1arcmin 3-stage ...

Torque: 375 Nm - 14,010 Nm
Rotational speed: 1,600 rpm - 5,500 rpm

... 14,010 Nm Ratios: 2-stage : 22 / 27.5 / 38.5 / 55 3-stage : 88 / 110 / 137.5 / 154 / 220 / 385 4-stage : 440 / 550 / 770 / 1078 / 1540 / 2695 / 3850 / 5500 Low backlash 2-stage ...

Torque: 5 Nm - 60 Nm

Two-stage worm gears are used whenever a high ratio is required within the smallest space available. Ratios are available from 20:1 up to 1,500:1. Z3-Gears are operating ...

Torque: 9 Nm

Two-stage worm gears are used whenever a high ratio is required within the smallest space available. Ratios are available from 20:1 up to 1,500:1. Z5-Gears are operating ...

Torque: 60 Nm

Two-stage worm gears are used whenever a high ratio is required within the smallest space available. Ratios are available from 20:1 up to 1,500:1. Z8-Gears are operating ...

Torque: 30 Nm - 29,400 Nm
Power: 0.12 kW - 90 kW

... advantages in industrial application. Features: Wide Ratio Range: One-stage, two-stage and three stage units are available to reach wide range of ratios.

... These self-design reducer series have been authorized as standard equipment by Chinese National Construction Industry Committee. Common Features: * Transfer Power smoothly and steadily. * High loading capacity due to ...

Torque: 0 Nm - 42,000 Nm
Power: 5.5 kW - 200 kW

... high-pnedaon rigid gear assembly with thrust block specially designed for the plastWrubber screw extruder. The gearbox employs the high-strength low-carbon alloy steel for gears and shafts, ...

Power: 3,000, 4,500 kW

... principle in the first planetary stage. The bogie principle can compensate for deformations in the surrounding structures thereby ensuring optimal gear load distribution under all operational conditions. ...

Power: 2,050, 3,000, 2,000, 3,600, 6,150 kW

... suspension ZF Wind Power offers products with a proven design topology featuring a combination of one or two planetary stages and one or two parallel gear stages. ...

Power: 1,500, 2,100, 2,300 kW

... Wind Power offers products with a proven design topology featuring a combination of one or two planetary stages and one or two parallel gear stages. ...

Power: 14, 22 kW

... Planetary- Bevel Gear with a flange PPL – 14/22-P planetary- bevel gear works with the engine with a power of 14 or 22 kW, is used for a drive of scraper conveyors SKAT, PRP – 150 and other mining equipment ...

Power: 11 kW

Traversing gear reducer 11/257 for a heading machine AM-50 Reducer 11/257 with a power of 11kW with a nominal ratio 257 designed for traversing gear of a heading machine ...

Rotational speed: 12 rpm - 457 rpm
Power: 0.25 ch - 1.5 ch

The 811 model of reducers by Bison is constructed with high quality cast aluminum housing, with hardened steel helical and spur gears rated AGMA Class 11. The unit utilizes ball and needle bearings, ...

Torque: 200 Nm - 400,000 Nm

... Overview Technical Info The ZS – Cyclo-Line series is available in three different versions: ZS – Shaft-mounted gearbox for internal installation ZS-M – Compact shaft-mounted drive ZS-L – Compact high-performance ...