Volumetric flow rate: 1.5 l/min - 250 l/min
... brand new Ultrasonic Flow Meter can be used in conductive or non-conductive liquids, so it can be widely used in most liquid without the restriction or being affected by other mixed materials in the ...
Process temperature: -40 °C - 140 °C
... demands. deltawave is an ultrasonic flow metering system for water and wastewater in a wide range of applications, for example in filled pipes, partially filled pipes, open channels and rivers. The multi-path flow ...
systec Controls
Process temperature: 41 °F - 131 °F
Process pressure: 0 bar - 39.99 bar
... times of ultrasonic waves that are traveling in and against the direction of fluid flow. The Hoffer Ultrasonic flow meters come with a flow sensor ...
Volumetric flow rate: 0 m³/h - 6 m³/h
Process temperature: -25 °C - 70 °C
... GAS SMART METERS SSM-U4 Ultrasonic Smart Gas Meter A Modular design concept combined with the adoption of consolidated open standard protocols have been the key to success of Pietro Fiorentini’s smart ...
PIETRO FIORENTINI
Process temperature: -30 °C - 80 °C
Process pressure: 0 bar - 19.6 bar
... high-accuracy ultrasonic flowmeter that is especially designed to operate on applications that involve low flow region and low pressure. It is capable of reverse and forward metering, and can be used ...
Oval Corporation
Process temperature: 120 °C
... intelligent solution with its sonar ultrasonic volumetric flow sensor. Ultrasonic volumetric flow sensors have the great advantage that there are no moveable parts in the volume flow. ...
Process temperature: 0 °C - 60 °C
Process pressure: 7, 10 bar
Precision: 2 %
... can indicate meter failure, no flow, high flow and power status making monitoring simple and efficient. addle wheel, nutating disc and other mechanical flow meters ...
FLOMEC
Process temperature: 0 °C - 80 °C
... Flowcont UN Flow sensor for conductive and nonconductive liquids No moving parts, compact design Process temperature up to 80 °C, process pressure up to 10 bar High chemical resistance thanks to seal-free sensor design Large display ...
Volumetric flow rate: 0.1, 0.2, 1 l/s
Process temperature: 0 °C - 50 °C
Process pressure: 7 bar
... The ultrasonic flowmeter in beverage dispensing systems for alcoholic and nonalcoholic drinks. The contact-free flow measurement with no moving parts is wear and maintenance free. The free pipe cross-section ...
MIB GmbH Messtechnik & Industrieberatung
Volumetric flow rate: 1 l/h
Process temperature: 0 °C - 90 °C
Process pressure: 16 bar
... adjust the angle of view, convenient reading. ● Ultrasonic wave reflection technique, π-type structure, small pressure loss. ● The body is made of forged brass, formed by casting forging. ● Low starting flow, ≤1 L/h. ● ...
Process temperature: -20 °C - 60 °C
Process pressure: 0 MPa - 26 MPa
Repeatibility: 0.1 %
... conditions into account. It has effectively solved the influence on the metering precision caused by flow distortions( such as turbulent flow, swirl flow, pulsing flow etc). CL-1-4S ...
Jiangsu Flowna Intelligent Technology Co. Ltd
Process temperature: -30 °C - 160 °C
Repeatibility: 0.2 %
... Handheld Ultrasonic Flow meter Principle Working: Time-transit measurement principle is adopted, the signal transmitted by one flow meter transducer passes through the ...
Q&T Instruments
Process temperature: 4 °C - 57 °C
Process pressure: 0 bar - 10 bar
Precision: 2 %
... PSC measures bi-directional flow over the entire measurement range and near zero flow velocities down to 0.04 m/s. Sensors: Ultrasonic velocity sensor (up to 3 sensors possible) Water level sensors ...
GWF
... is an ultrasonic level meter that comes with five relays, suitable for OCF (Open Channel Flow) applications. The device supports no less than 17 flumes and weirs, being able to calibrate for a custom ...
Solidat Applied Technologies Ltd.
... differential pressure flow measuring device unsuitable since they require large differential pressure to operate. PCD is one of the leading biogas flow meter manufacture in India. Thermal mass flow ...
... Non-intrusive ultrasonic flowmeter for clean liquids Displays, totalizes, data logs and transmits. Backlit LCD display. 5- key simple calibration. Password protected. 4-20mA / 0-5V output. Plug & play options. Flow ...
Toscano Linea Electronica
Process temperature: -20 °C - 100 °C
Process pressure: 0 bar - 40 bar
... Transit time type ultrasonic flow meter. Available in kit form or flanged pipe section UN PN 10 or 16. Available in diameters from 50mm to 3000mm. LCD. Power supply 110 - 220VAC - 24VDC. Maximum error ...
... handheld ultrasonic flowmeter MF-200H adopts non-contact measurement method, and the sensor can be installed on the outer wall of the pipeline to complété the flow measurement, which is convenient and ...
Mitech
Process temperature: 0 °C - 60 °C
Process pressure: 0 bar - 16 bar
... managed to increase system efficiency and reduce costs. Airscout Flow Meters remove any guesswork by collecting accurate measurements throughout a facility. BENEFITS OF AIRSCOUT FLOW METERS ...
... Designed for deployment in flood conditions Over 4 m/s (13ft/s) cruising speed User configurable control modes for varied conditions Available for all common acoustic Doppler current profilers Reduce survey time No personnel in or over the water Real ...
Process temperature: -30 °C - 160 °C
... installing the sensors of the ultrasonic flow meter. The installation aid graphically displays the signal quality of the ultrasonic flow meter. In addition, ...
PCE Deutschland GmbH
Process temperature: -30 °C - 160 °C
... measured flow rate, the ultrasonic flow meter can determine the amount of heat. If required, the ultrasonic flow meter can calculate ...
PCE Deutschland GmbH
Precision: 2 %
... Our ultrasonic flow meter offers the capability to measure flow rates from ±0.1 m/s to ±5 m/s using ultrasonic technology. This flow meter ...
PCE Deutschland GmbH
Volumetric flow rate: 1.7 m³/h - 5,100 m³/h
Process temperature: 20 °F - 120 °F
Process pressure: 200 psi
... >
Dimensions and Flow Range - Small Digital Flowmeter
Series 9090 | Pipe Size 1/2" | A in 3.31 | A mm 84 |
Flow Range 1–100 SCFM (1.7–170 m3/hr)
Series 9091 | Pipe Size 3/4" | A in 3.49 | A mm 89 ...
Process temperature: -20 °C - 480 °C
Process pressure: -10,000 Pa - 10,000 Pa
... is a high temperature ultrasonic Flowmeter independently developed by Cubic-Ruiyi. Based on the TOF (Time of Flight) principle of ultrasonic wave, the gas flow rate in the flue is calculated ...
Cubic Instruments (Wuhan) Ltd.
... Cross-Stack Ultrasonic Flue Gas Flowmeter Gasboard-7900M Introduction Gasboard-7900M is a high-temperature ultrasonic flowmeter independently developed by Cubic Instruments. Based ...
Cubic Instruments (Wuhan) Ltd.
Volumetric flow rate: 3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
... Introduction BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions ...
Cubic Instruments (Wuhan) Ltd.
... Industry or by email [email protected] Aecl AFU-800 Ultrasonic Flow Sensor [Features] ● Measurement: Flow rate ● Measuring range: Flow rate: 0~±30m/s; Temperature (for ...
6 expert tips
Prioritize clamp-on designs to reduce installation costs and eliminate the risk of process contamination or system leakage risks.
Evaluate the signal-to-noise ratio in high-vibration environments to prevent measurement errors caused by mechanical interference on transducers.
Select dual-path or multi-path sensor configurations when dealing with non-ideal flow profiles to enhance overall measurement repeatability.
Ensure the chosen device carries ATEX or UL certifications for hazardous zones to maintain strict plant safety compliance.
Calculate the total cost of ownership by including periodic calibration requirements and battery life for remote monitoring applications.
Volumetric flow rate: 40 m³/h - 313 m³/h
Process temperature: 0 °C - 50 °C
Process pressure: 16, 10 bar
... STANDARDS OF MANUFACTURE EN 1092-2 DRILLING FLANGES MATERIALS BODY CAST IRON EN 1561 (OPT. EN GJS-400-15 EN 1563) CORROSION PROTECTION COATED INSIDE-OUTSIDE FIG.650 (FBE) EPOXY 300 MICRONS RAL 5005 FIG.650IRR (FBE) EPOXY 200 MICRONS RAL 7016 CERTIFIATES D.M. ...
the best suppliers