Volumetric flow rate: 35 m³/h
Process temperature: -40 °C - 350 °C
Process pressure: 100 bar
... Metri IC-IPM Insertion Paddlewheel Meter (IPM) Series is the ideal liquid flow meter for insertion into pipe sizes ranging from 40mm to 300mm. Simple to install and operate, ...
Metri Measurements
... modern and precise flow meter with internal data logging. Equipped with two analogue inputs and two PULS inputs, can measure flow and other values, such as temperature and humidity. In ...
Process temperature: -20 °C - 80 °C
Process pressure: 1.6 MPa
Precision: 1.5 %
Insertion type electromagnetic flow meter is a type of electromagnetic flow meter has been used throughout industries for more than 50years. Insertion type electromagnetic ...
Q&T Instruments
Precision: 2 %
The Portable area velocity flow meter is designed for mobile flow monitoring of slightly to heavily polluted media in full or partially full pipes or open channels. It uses advanced ...
Volumetric flow rate: 0 l/s - 999,999 l/s
Process temperature: -40 °C - 70 °C
Application: ultrasonicopen channel flow meter is non-contact type device, it use reflection of soundwaves theory to detect level and get flow by calculation. The meter ...
Volumetric flow rate: 10 l/min - 600 l/min
Process pressure: 6 bar
... flange flow meter is equipped with four stainless steel poles on four sides and uses flange adaptor. This flow meter is robust, highly secure and ideal for high pressure ...
Volumetric flow rate: 0.6 m³/h - 70,000 m³/h
Process temperature: 80, 180, 150, 100 °C
Precision: 0.2 %
Electromagnetic flowmeter consisting of a sensor and a transmitter. The flowmeter is used to measure volumetric flowrate for conductive liquids and pulps. Several output signals ...
Process temperature: -30 °C - 160 °C
... from each other. To carry out flow measurements with the ultrasonic flow meter, the flow velocity, the volume flow and the volume are displayed after ...
Process temperature: -30 °C - 160 °C
The ultrasonic flow meter has a measuring range of ±32 m/s. To perform flow measurement with the ultrasonic flow meter, the flow velocity, ...
Volumetric flow rate: 1.3 m³/h - 3,200 m³/h
Process temperature: -10 °C - 40 °C
Process pressure: 0 Pa - 200,000 Pa
Description BF-3000 Ultrasonic Biogas Flowmeter can be commonly used with various industrial gas streams(biogas, natural gas, air, etc.), but with special design to enable it withstand the wet and corrosive gas conditions ...
Volumetric flow rate: 0.4 m³/h - 1,600 m³/h
Process temperature: -20 °C - 65 °C
Process pressure: 0 Pa - 200,000 Pa
... industrial use/ for natural gas or general use Gasboard-7200 gas flowmeter used the latest ultrasonic transit-time differential method to measure natural gas flow and other kind of gases flow. ...
Volumetric flow rate: 0 l/h - 40 l/h
Process temperature: 5 °C - 35 °C
Calorimetric flow meter based on heat dissipation for applications in potable water, surface water treatment and effluent. Based on heat dissipation ...
Volumetric flow rate: 0.2 m³/h - 95,560 m³/h
Process pressure: 1.6, 1, 0.6 MPa
... Features: 3-4 years life span, high accuracy measurement ★ Application: Wastewater plant, river water, sea water, pure water 1.Measurement is not affected by the ...
Volumetric flow rate: 7 us gal/h - 1,200 us gal/h
Process temperature: 38, 54 °C
Process pressure: 125, 100 psi
... alcohol, and cleaning agents flow measurement • Chlorination & effluent water treatment plants • Mineral water treatment • Low measuring of liquids ...
Volumetric flow rate: 50 l/h - 60,000 l/h
Process pressure: 10 bar
The flow meter operates on the float principle and is used for flow rate measurements in closed pipelines. The medium flows through the vertically installed flow ...
Process temperature: 60 °C
Precision: 1 %
Use the Doppler Ultrasonic Area/Velocity Sensor in open channels or pipes that run partially full to measure depth and velocity. Access to the monitoring point is required for installation and maintenance.
Volumetric flow rate: 50 m³/h
Process temperature: 20 °C
Process pressure: 10 bar
MTCMF Coriolis mass flowmeters are the leading precision flow and density measurement solution offering the most accurate and repeatable mass measurement for liquids, or slurries. MTCMF meters ...
... Protection: Transmitter IP65 [Applications] ● Water treatment ● Water Management system ● HVACR System ● Energy saving system ● Places where would be required to measure water, ...
Please specify:
Help us improve:
remaining