- Hydraulics - Pneumatics >
- Valve >
- Weld valve
Weld valves
DN: 0.25 in
Pressure: 63 bar
Temperature: -10 °C - 210 °C
... producers standard female threaded ends acc. to EN 10226-1 with screwed butt weld end connection spring close unit TYPE 43 One-piece sampling device ball valve. The economical solution ...
DN: 0.75 in - 3 in
Pressure: 0 bar - 17 bar
Temperature: -51 °C - 204 °C
... bioprocessing industry Weirless Radial diaphragm tank valves offer solutions to the most challenging applications. It is easy to weld our valves truly flush to the bottom of your tank ...
Watson-Marlow Fluid Technology Group
DN: 100 mm - 1,052 mm
Pressure: 110 bar - 420 bar
... reduce stresses placed on components by thermal binding Minimized valve leakage - Designs incorporate disk guidance and optimized gate design for tight seating Materials and welding capabilities for ...
DN: 1 in - 8 in
Temperature: -29 °C - 427 °C
ANSI-Control valve - straight through with shaft guided plug Application: Selection criteria: complex control task, critical operating conditions, specific requirements Application: process technology, (heavy-) industrial ...
ARI-Armaturen
DN: 10 mm - 200 mm
Pressure: 160 bar
Temperature: -10 °C - 550 °C
Globe valve to DIN/EN with flanged ends (ZXL), butt weld ends or socket weld ends (ZXS), with gland packing, with on/off disc or throttling plug, rotating stem, seat/disc interface made ...
KSB S.A.S. - France
DN: 250 mm - 300 mm
Pressure: 28 bar - 40 bar
Temperature: -60 °C - 150 °C
Inlet connection type: Butt weld, Outlet connection type: Butt weld, Equipment: Cap Inlet connection type: Butt weld, Outlet connection type: Butt weld, Equipment: Handwheel
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 ...
SAMSON
DN: 150 mm - 300 mm
Pressure: 1 MPa
Temperature: 150, 450 °C
... . Read this instruction carefully before installation, and check valve type, size and technical parameters. 2. It is strictly forbidden to Weld flanges after installing valves. The valve ...
DN: 0.5 in - 2 in
Pressure: 138 bar
Temperature: 0 °F - 400 °F
The NIBCO® stainless steel ball valve provides bubble-tight shutoff at 2000 PSI. This valve is available with butt weld pipe connections and cast ISO mounting pad for actuation purposes. ...
DN: 0.25 in - 4 in
Pressure: 1,000 psi
... CF8M/ EN10213 1.4408), AISI-304 ( ASTM-A351-CF8/ EN10213 1.4308), S-20C (ASTM-A216-WCB, EN10213 1.0619) Full port, Long butt weld end, Lug body, Blow-out proof stem Locking device, End cap material AISI-316L (EN10123 ...
BOLA-TEK Mfg.Co
DN: 8 mm - 50 mm
Pressure: 40 bar
Temperature: -30 °C - 200 °C
Ball valves with internal and external threads, with cutting ring threaded joint, pressure gauge ball valves and measuring lead plug valves In the on/off operation for general industrial ...
Pentair Valves & Controls
DN: 25, 6, 15 mm
Pressure: 420 bar
Temperature: 4 K - 323 K
Series 1400 AXIUS - Available as: -- ambient valve from -30° C to + 50° C (243 K to 323 K) -- cryogenic valve -271° C to -30° C (2 K to 243 K) - Valve for high pressure applications ...
DN: 8 mm - 50 mm
Pressure: 64 bar - 140 bar
Temperature: -30 °C - 218 °C
Body material Stainless steel 316 Ball material Stainless steel 316 PN (End) PN64 Connection Female BSP Contact sealing PTFE Operating system Lever
TECOFI
DN: 0.25 in - 2 in
Pressure: 140, 100 bar
Temperature: -20 °C - 220 °C
... request. 3 pièces carbon Steel bail valve fully encapsulated bolts with full bore for Chemical industries, petrochemical industries, hydraulic installation, heating, water distribution, compressed air. Bail valve ...
SFERACO
DN: 15 mm - 100 mm
Pressure: 40, 63 bar
Somas 3-piece full-bore ball valves are mainly intended for use as manually operated valves or remotely actuated on/off valves. The ball valve meets ISO standards. The ...
DN: 50 mm - 900 mm
Temperature: -29 °C - 800 °C
Model:Cast steel globe valves 900lb •Brief description: •Series CSGLV-4 are used to cut or connect the pipe media under nominal pressure Class 900lb, working temperature -29 to 800 degrees in industries including ...
DN: 25 mm - 150 mm
Pressure: max 22.7 bar
Reliable flow direction control in a hygienic production process - Two-part valve disc, screwed, with a defined space for the sealing ring for easy installation - Seal resistant to seepage and ripout - Shaft ...
Evoguard GmbH
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar ...
DN: 15 mm - 100 mm
Pressure: 6, 10 bar
Temperature: -40 °C - 60 °C
... materials Compact structure, light installation, high-cost performance. Please close the valve before installation. Using a rubber gasket instead of an inner plug, the valve torque and tightness can ...
Ningbo Baodi Plastic Valve Co., Ltd.
DN: 0.125 in - 4 in
Pressure: 0 bar - 2,500 bar
Temperature: -250 °C - 450 °C
Floating ball valves are the most common type of ball valve used to cut off flow in pipes. They are quarter-turn valves. The ball is perforated, so when the valve is ...
DN: 25 mm
Pressure: 10 bar
Temperature: 0 °C - 100 °C
diaphragm valve PP-H d25 welding sleeve EPDM-membrane handwheel made of PP-GR pressure: PN10 KVs value: 15,66 m3/h optimised fluid dynamic design connection: - welding sleeve product ...
DN: 8 mm - 100 mm
• 3-piece body ball valve • full bore • end connections according BSP, NPT, BW or SW • face to face dimension according our • production standard • available in various body and seat material
DN: 15 mm - 400 mm
... Sets/Year Pressure Seal Extended Stem Gate Valve JIEYU gate valves are multi-turn valves typically used as a stop valve or isolation valve ...
Zhejiang Jieyu Valve Company
Pressure: 400, 420, 500 bar
Temperature: -10 °C - 100 °C
Valves and shut-off devices are components for blocking and control of liquids or gases. The range of products includes 2-way ball valves, 3-way ball valves, hydraulic ball valves, ...
... from the medium. So our floating ball valve has good sealing performance . 3.The valve stem of the manual ball valve is offered with blow-out proof structure. 4.In case there is fire,the ...
Henan Quanshun Flow Control Science and Technology Co.,Ltd
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining