DN: 6.426, 50, 0.5 mm
Pressure: 0 MPa - 1 MPa
... two ball valve, its characteristic is safe sampling and steady. During the sampling progress, first of all, close the A valve which is near the equipment(or piping system), then open B valve, to let the ...
Wenzhou Lihong Machinery TECHNOLOGY Co., LTD
DN: 15 mm - 50 mm
Pressure: 136 bar
Temperature: -29 °C - 425 °C
... high tightness (leakproofness class A according to EN – 12266 – 1) environment friendly tests according to API 598 length of installation according to MFG standard end for welding in according to ASME B16.11 ...
DN: 200 mm - 1,000 mm
Pressure: 0 bar - 7 bar
Temperature: -25 °C - 180 °C
... SAFETY QUICK-CLOSING BUTTERFLY FLAP VALVE Safety quick-closing butterfly flap valves are an integral part of the containment. The butterfly flap valves are used in the ventilation system (HVAC) of ...
... Type: 2-Way ball valves Description: Fully welded ball valve for installation below ground level. Also available with metallic sealing. Field of application: Natural gas industry ...
DN: 15 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 400 °C
... – shut-off globe valve C09 and shut-off globe valve with control cone C09.4 – rotating rising stem – standard bonnet construction – design of the body is straight – sealing surface is welded by hard ...
ARAKO spol. s r.o
DN: 50 mm - 1,500 mm
Temperature: -46 °C - 121 °C
... Product type On/off valve Valve Type - Fully Welded Ball Valve Model QH*67F Size NPS 2 ～NPS 60/DN50～DN1500 Seal type Soft Seated Operating temp. -46℃～121℃ Operating ...
Temperature: 196 °C - 650 °C
... Refining • Petrochemical • Pulp and paper • LNG (Liquefied Natural Gas) AFC ball valves are manufactured to provide maximum service life and dependability. Ball valves can meet the design requirments of American ...
HEFEI AFC INTERNATIONAL TRADE CO., LTD.
... conform to :API602, MSS-SP-117 • Connection ends conform to : 1)Socket welded dimension conform ANSI 816.11 2)Screw ends dimensli conform to ANSI 81.20.1 3)Butt- welded conform to ANSI 816.25 4)Flanged ends ...
DN: 8 mm - 100 mm
Pressure: 64, 25 bar
... PIECES SW AISI316 ATEX BALL VALVE DIRECT MOUNT ISO PAD AND DIN SHAFT 2 way full bore ball valve - 3-pieces type - ATEX II2 G/D CT3 - PN64 - Body, ball and stem in stainless steel AISI316 - TFM1600 seats - FKM o-ring - ...
TUNING Fluid Solutions SARL
DN: 200 mm
... Fully welded ball valve, standard model, available in the sizes up to DN 200 (8”) full bore or to DN 300 (12”x8”) reduced bore, PN 10÷50 or ANSI 150-300, in carbon steel with floating ball in stainless steel or nickel ...
Negri Fratelli srl
DN: 100 mm - 3,000 mm
Pressure: 10, 16, 25, 40 bar
... eccentric valves used for their strength and resistance even at high pressure. Made in high quality ductile cast iron with stainless steel shafts and a welded-on seat ring. STANDARDS OF MANUFACTURE EN 593 METALLIC ...
DN: 20 mm - 100 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 80 °C
... Fully welded steel ball valve, reduced bore, for natural gas transmission and distribution, BW ends, with handle. ...
BONOMI GMBH
DN: 15 mm - 250 mm
Pressure: 16 bar
Temperature: -46, -196 °C
... The medium temperature of the cryogenic ball valve is very low, which is used for the control system of cryogenic medium. The valve produced by a special low-temperature process to ensure the low-temperature performance ...
pneumaticairactuator.com
DN: 10 mm - 65 mm
Pressure: 16 bar
Temperature: -10 °C - 200 °C
... Farbo presents a new pneumatic globe valves series. The body in stainless steel makes new valves suitable for all applications which require aggressive fluids and performances up to 200° C and 16 bar working pressure. ...
DN: 0.5 in - 40 in
... Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ball valves are available in types of ...
China MED Valve Co., Ltd.
DN: 2 in - 40 in
Temperature: -29 °C - 450 °C
... parts Advantage: Professional: We are professional manufacturer of valves.Ensure our valves is quality controlled and reliable. Quality Control: We have been engaged in valve design for many ...
wenzhou domos fluid equipment co.,ltd
DN: 250 mm - 350 mm
Temperature: 250 °C
... steelMATERIAL SEALING DISC :Spring steel ( welded with sealing disc)TIGHTNESS IN THE PASSAGE :Dust-tightTIGHTNESS TO THE OUTSIDE :Dust-tightDRIVE :Hand lever, pneumatic cylinderACCESSORIES :5/2-way solenoid valve 24 V/DC, ...
Jaudt Dosiertechnik Maschinenfabrik GmbH
DN: 40 mm
Pressure: 16 MPa - 40 MPa
Temperature: -20 °C - 150 °C
... costs. 2. There will be no external leakage and other phenomena. The valve body is a welded structure, so the valve is light in weight and easy to be insulated. 3. Since the valve ...
DN: 25 mm - 100 mm
Pressure: 0.2 bar - 10 bar
Temperature: -10 °C - 140 °C
... extraction of the valve by means of 4 screws while the flanges welded to the installation remain fixed. Sanitary butterfly valvescan be operated automatically through an actuator (sanitary pneumatic butterfly valve, ...
INOXPA
DN: 20 mm - 100 mm
Pressure: 25, 40 bar
Temperature: -20 °C - 80 °C
... Fully welded steel ball valve, reduced bore, for natural gas transmission and distribution, BW ends, with handle. ...
DN: 0.5 in - 30 in
... Wcb API600 Class 600lb Cast Steel Gate Valve , Manual Actuator 4 Inch Gate Valve Product Details: Place of Origin: - Wenzhou China Brand Name: - JIEYU Certification: - API ISO Ts CE Payment & Shipping Terms: Minimum ...
Zhejiang Jieyu Valve Company
... Vatac Three piece Bolted Body Ball Valves are available both in Forged and Investment Castings. In Straight through two ports or Multi-ports structures. Designed and manufactured to the most updated international standards API 6D, ASME ...
Vatac Valves (Wenzhou) Corporation
DN: 50 mm - 200 mm
... convenient operation,the valve bonnet and valve body are connected by bolt. 4.There is a preheating device installed on the valve bonnet of the globe valve. The hot stream imported can ...
DN: 15 mm - 150 mm
Pressure: 16 bar
... Ex-proof electric ball valve design with ISO 5211 platform to make the actuator directly installed. Mainly used to cut off or adjust the direction of the medium in pipeline, valve structure is easy operation and maintenance, ...
DN: 8 mm - 150 mm
Pressure: 10 bar - 40 bar
Temperature: -196 °C - 300 °C
... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...
DN: 2, 3, 5, 6 in
Pressure: 2,000, 3,000, 5,000, 7,500 psi
... API6A Demco DM Mud Gâte Valve or Mud Valve is engineered for the rigorous requirements of abrasive and erosive service conditions in oilfield applications, such as mud, cernent, fracturing and water service. The DM Gâte ...
Jiangsu Deenpu Petrochemical Machinery Co.,Ltd
DN: 0.25 in - 4 in
Pressure: 25 bar - 40 bar
Temperature: -20 °C - 170 °C
... Description NSF low lead brass 600 wog full port ball valve We produce all types of Brass Valves. Such as Brass Ball Valves, brass gate valve, brass stop valve, brass ...
DN: 4 mm - 10 mm
Pressure: 250 bar
Temperature: 0 °C - 500 °C
... NVFK-HP High-pressure needle valve, bellow sealed, with stuffing box. Merkmale DN 4 - DN 10 metal tight conical globe metal resealing fully welded bellow and safety stuffing box above FTF dimensions acc. to producers ...
DN: 6.35 mm - 50.8 mm
... full port ball valve with Socket Weld ends and an ISO 5211 compliant direct mount actuation pad. The 2WE20 is rated to 2000 WOG in sizes ranging from ¼” to 1” while the 5WE20 is rated to 1500 WOG in sizes ranging from ...
Econ Brand Valves
DN: 450 mm - 1,400 mm
Pressure: 16 bar
Temperature: -180 °C - 650 °C
... Ball valves are often subjected to extreme conditions, especially when used in pipelines. To withstand even the highest loads, Böhmer ball valves are therefore welded through the entire cross-section. ...
BÖHMER Kugelhähne, Werner Böhmer GmbH
... large adjustment ratios. The same requirements arise during low-load operation. Versions Forged valves in straight, angled or Z form, with welded studs as per DIN, ANSI or other standards. Advantages No cavitation ...
Welland & Tuxhorn AG
DN: 80 mm - 3,200 mm
Pressure: 0.1 bar - 1.6 bar
Temperature: -29 °C - 800 °C
... , light load, welded structure. Suitable for regulation of low pressure gas or liquid, high temperature styles are also available. W1 series adopt open type of butterfly plate; W2 series plate manufactured into an oval, when the valve ...
DN: 20 mm - 200 mm
Pressure: 20, 50 bar
Temperature: -50 °C - 427 °C
... shutoff capabilities, and superior valve positioning offers optimum control performance. The 21000 Series is also available in various materials, pressure ratings, and end connections offering a complete high-performance valve ...
DN: 0.5 in
Pressure: 103 bar - 138 bar
Temperature: -17 °C - 204 °C
... , throttling of the valve may result in premature seal failure and/or inability to turn the valve handle. Parker's stainless steel ball valves meet the material requirements of of NACE MR-01-75. Parker's ...
DN: 13 mm - 73 mm
Pressure: 0 bar - 45 bar
Temperature: -40 °C - 120 °C
... li>
... be paid to the use of electric ball valves and butterfly valves in the following environments. Function classification 1. Bypass valve: The ball valve is generally opened by static ...
DN: 10 mm - 300 mm
... Stainless Steel 304 316L Tri Clamp Manual Sanitary Butterfly Valve Size: 1/2" to 10",DN10 to DN300 Material: SS304, SS316L Connection: Clamped/Threaded/Union/ Welded/flanged Standard: 3A,DIN.SMS.ISO.RJT,DS,IDF Operation: ...
the best suppliers