- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Smart pressure transmitter PCE-28.relativeabsolutepiezoresistive
Add to favorites
Compare this product
Characteristics
- Pressure type
- relative, absolute
- Technology
- piezoresistive
- Output
- 4-20 mA, HART
- Supply voltage
- DC
- Mounting
- threaded
- Process connection
- G 1/2, G 1/4, NPT 1/4, NPT 1/2, M20 x 1,5
- Material
- stainless steel
- Protection level
- intrinsically safe, ATEX, SIL 2, IECEx, IP65, IP67, IP68, IP66
- Other characteristics
- compact, two-wire, smart, programmable
- Pressure range
Min.: 0 bar
(0 psi)Max.: 1,000 bar
(14,503.77 psi)- Precision
0.075 %, 0.1 %
- Process temperature
Min.: -40 °C
(-40 °F)Max.: 85 °C
(185 °F)
Description
PCE-28.SMART pressure transmitter is applicable to the measurement of the pressure, underpressure and absolute pressure of gases, vapours and liquids. The active sensing element is a piezoresistant silicon sensor separated from the medium by a diaphragm and by specially selected type of manometric liquid.
Communication
The communication standard for data interchange with the transmitter is the Hart protocol.
Communication with the transmitter is carried out with:
– a KAP-03, KAP-03Ex communicator
– some other Hart type communicators,(*)
– a PC using an HART/U
The data interchange with the transmitter enables users to:
identify the transmitter
configure the output parameters:
- measurement units and the values of the start points and end points at the measurement range
- damping time constant
- conversion characteristic (inversion, user's non-linear characteristic)
read the currently measured pressure value of the output current and the percentage output control level
force an output current with a set value
calibrate the transmitter in relation to a model pressure
Communication
The communication standard for data interchange with the transmitter is the Hart protocol.
Communication with the transmitter is carried out with:
– a KAP-03, KAP-03Ex communicator
– some other Hart type communicators,(*)
– a PC using an HART/U
The data interchange with the transmitter enables users to:
identify the transmitter
configure the output parameters:
- measurement units and the values of the start points and end points at the measurement range
- damping time constant
- conversion characteristic (inversion, user's non-linear characteristic)
read the currently measured pressure value of the output current and the percentage output control level
force an output current with a set value
calibrate the transmitter in relation to a model pressure
Catalogs
PRODUCT CATALOGUE 2026/2027
188 Pages
Exhibitions
Meet this supplier at the following exhibition(s):
Other APLISENS S.A. products
Pressure
Related Searches
- Flowmeter
- Volume flowmeter
- Liquid flowmeter
- APLISENS data-logger
- APLISENS pressure transmitter
- Pressure gauge
- Level limit switch
- Waterproof flowmeter
- APLISENS analog pressure transmitter
- Gas flowmeter
- Liquid level limit switch
- APLISENS level sensor
- APLISENS temperature data-logger
- APLISENS liquid level sensor
- Industrial flowmeter
- Analog pressure indicator
- APLISENS membrane pressure transmitter
- APLISENS waterproof pressure transmitter
- Stainless steel pressure transmitter
- Relative pressure transmitter
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.