Stainless steel lightning rod FLR-02

1. Description Ball regular type lightning rod is marking up of rod part, decorative ball base part, uphold pole and flange. Connect the rod parts and uphold pole with decorative separately, and then assemble them with flange. 2. Installation of lightning rods Firstly, install the assembled lightning rod on the top of the building (fixed the lightning rod with the building by the four ∮10mm hold of the flange, please refer to the drawing of flange). Using Zinc bonded flat steel 40mm×4mm or round steel ∮12mm as down conductor, which should be welded to the flange from grounding electrode by means of direct road. The down conductor should be attaching to the building (the outer side of the wall), and be fixed to the wall of interval 1.5m. 3. Characteristics 1) Sphere single lightning rods, used for protection all kinds of building from direct lightning. 2) main material is stainless steel, acid-proof and rust-proof. 3) Strong Wind bearing ability. 4) Rod part is made from special material, with stronger air termination withstand capacity. 5) Special design, with decorative function for buildings. 6) Simple construction, convenient installation. 4. Electrical Parameters 1) Operating environment: Outdoor 2) Diameter of Decorative ball (D): φ200（mm） 3) Max. Diameter of the rod (M): φ38（mm） 4) Height (L): 1.5（m） 5) Housing material：Stainless steel（202） 6) Operating temperature: -40℃~+80℃ 7) Relative humidity: ≤95% 8) Diameter of Flange (T): φ240（mm） 9) Thickness of Flange: 8(mm) 10) Fixup orifice of Flange: φ10（mm）x 4 11) Weight: 5(Kg) 12) Max. impulse current Iimp： 300 kA 13）wind bearing： 40(m/s) 14） No. of main rod： 1