Marking stamp BIG

HOT MARKERS BIG SERIES - FOR PLASTIC, LEATHER AND WOODHot stamps are used to indelibly mark materials such as wood, PVC, ABS, plastic, leather, etc. They come in various sizes and powers to better adapt them to the material to be marked and can reach a maximum temperature of 400-450°C. Depending on the type of material being stamped, it is advisable to adjust the power of the stamp to make the marking more or less legible. For example, for balsa wood, a lower power is sufficient, while for rough or particularly hard woods or for leather, a higher power is required. The time it takes to affix the stamp is normally around 2-3 seconds and allows you to obtain a well-defined mark without burning.The BIG series is made up of high power markers:- single handle models with plate from 100x50 mm up to 150x80 mm- double handle models with plate from 200x50 mm up to 350x50 mm.The indicated price already includes:- Neutral brass plate- Graphic file creation- Personalization (engraving) of the brass plate via numerical control machineFollowing the order you will be contacted by our staff to decide together on the best customization solution.MODELHandlePowerPower supplyPlateFP15.10.50Single450 W230 V100x50 mmFP15.15.50 for pressSingle450 W230 V100x50 mmFP15.20.100Single1150 W230 V150x100 mmFP15.30.50Single600 W230 V150x50 mmFP15.35.50 for pressSingle600 W230 V150x50 mmFP15.40.80Single1000 W230 V150x80 mmFP15.50.50Double800 W230 V200x50 mmFP15.55.50 for pressDouble800 W230 V200x50 mmFP15.60.80Double1200 W230 V200x80 mmFP15.70.100Double1400 W230 V200x100 mmFP15.80.100Double1600 W230 V250x100 mmFP15.90.50Double1000 W230 V250x50 mmFP16.00.80Double1350 W230 V250x80 mmFP16.10.50Double1200 W230 V300x50 mmFP16.20.80Double1500 W230 V300x80 mmFP16.30.50Double1400 W230 V350x50 mm*Models FP15.15.50, FP15.35.50 and FP15.55.50 can only be used with the bench press for vertical marking.For customization it is necessary to provide image files compatible with the dimensions of the chosen plate. It is advisable to avoid inserting very small details or writing in particularly elaborate fonts that could get lost in the marking.OPTIONAL- Power regulator- Additional rectangular plates- Lever press for marking verticallyMaximum temperature: 400-450°CMarking time: 2-3 secondsMaterials: wood, PVC, ABS, plastic, leather, etc.Single and double handle modelsPlates from 100x50 mm up to 350x50 mmPower range: 450 W to 1600 WPower supply: 230 VPersonalized brass plate includedOptional power regulator and lever press