Single-phase servo-drive ACSDP100H-75

RS-485Modbus RTU220-240 V

Product Overview
The ACSDP100H-75 is a pulse high-performance AC servo drive supporting 750W–1kW motors with single-phase AC220V input. Offers advanced control and tuning for mid-power precision applications.

Key Highlights

• Output power range: 750W – 1kW
• Input: Single-phase AC220V -15%~+10%, 50/60Hz
• High-performance pulse control with advanced auto-tuning
• 6 control modes: Position, Speed, Torque, Position+Speed, Position+Torque, Speed+Torque mixed
• Pulse input: Pulse+Direction / CCW-CW / A/B Quadrature / Internal position
• Electronic gear ratio: Numerator 1–32767 / Denominator 1–32767
• RS485 Modbus RTU communication
• Cooling fan for mid-power thermal management
• 5-digit LED display with 4-button keypad

Summary

• Drive Type: Pulse High-Performance
• Output Power: 750 W – 1 kW
• Input Voltage: Single-phase AC220V -15%~+10%, 50/60Hz
• Control Mode: Position / Speed / Torque / Mixed
• Communication: RS485
• Position Input: Pulse+Direction / CCW-CW Pulse / A/B Quadrature / Internal

Full Specifications
Model: ACSDP100H-75
Drive Type: Pulse High-Performance
Output Power: 750 W – 1 kW
Input Voltage: Single-phase AC220V -15%~+10%, 50/60Hz
Control Mode: 0: Position; 1: Speed; 2: Torque; 3: Position+Speed mixed; 4: Position+Torque mixed; 5: Speed+Torque mixed
Protection Functions: Overspeed / Main power overvoltage / Undervoltage / Overcurrent / Overload / Encoder fault / Control power fault / Position error
Monitor Functions: Speed / Current position / Command pulse accumulation / Position error / Motor torque / Motor current / Running status
Control Input: 1: Servo enable; 2: Alarm clear; 3: CCW drive inhibit; 4: CW drive inhibit; 5: Deviation counter clear; 6: Command pulse inhibit; 7: CCW torque limit; 8: CW torque limit
Control Output: Servo ready / Servo alarm / Position complete / Mechanical brake
Regenerative Braking: Internal and external resistor support
Load Inertia: ≤ 3× motor inertia
Display / Operation: 5-digit LED, 4 buttons (▲ Increment / ▼ Decrement / SET Confirm / ◄ Exit)
Communication: RS485 (Modbus RTU)
Position Input Mode: 0: Pulse+Direction; 1: CCW/CW Pulse; 2: A/B Quadrature; 3: Internal position control
Electronic Gear Numerator: 1 – 32767
Electronic Gear Denominator: 1 – 32767
Dimensions (W×H×D): 41 × 159.5 × 158.5 mm
Mounting Depth: 158.8 mm
DIN Rail Width: 38 mm
Cooling: Forced air (fan)

Connector Interface (selected)
CN1: Control signal input/output connector (DB26 Male) — CN1 pins provide common for digital inputs, servo ON, alarm reset, positioning complete, position command pulse input, pulse input direction, overtravel signals, brake output, plus reserved pins
CN2: Encoder signal connector (DB15 Female) — encoder power +5V/0V, encoder A/B/Z inputs and differential pairs, encoder frame ground (FG), differential line receiver note
CN3 / CN4: Communication connectors (RJ45, for RS485 crystal head)
L1, L2: Main power input terminals
P, D, C, N: Dynamic braking resistor connection terminals
U, V, W: Servo motor output terminals — connect to motor U, V, W phases
PE: Protective earth terminal — connect to power supply ground and motor ground
CHARGE LED: Bus capacitor charge indicator. LED on = capacitor charged. Do not touch power terminals while LED is on, even after power-off.

Wiring & Mechanical
Mechanical dimensions and wiring diagrams provided for position control and speed/torque control modes as visual references in the product documentation.

Technical specifications

• Model: ACSDP100H-75
• Drive Type: Pulse High-Performance
• Output Power: 750 W – 1 kW
• Input Voltage: Single-phase AC220V (-15% to +10%), 50/60Hz
• Control Modes: Position, Speed, Torque, Position+Speed, Position+Torque, Speed+Torque
• Position Input Modes: Pulse+Direction, CCW/CW Pulse, A/B Quadrature, Internal position control
• Communication: RS485 (Modbus RTU)
• Electronic Gear Ratio: Numerator 1–32767 / Denominator 1–32767
• Display: 5-digit LED with 4-button keypad
• Protection: Overvoltage, Undervoltage, Overcurrent, Overload, Encoder fault, Control power fault, Position error
• Dimensions: 41 × 159.5 × 158.5 mm
• Cooling: Forced air (fan)
• Mounting: DIN rail (38 mm width), mounting depth 158.8 mm