- Hydraulics - Pneumatics >
- Pump >
- Stainless steel pump >
- Aalborg
Aalborg stainless steel pumps
Flow: 189 l/min
Pressure: 1.4 bar - 8.6 bar
Head: 8.8 m
... 25.4 mm) Husky 1050 double diaphragm pump features a stall-free, low pulsation air valve which provides a smooth and rapid changeover. Available in aluminum, polypropylene, conductive polypropylene, PVDF, stainless ...
Flow: 11.4 l/min
Pressure: 75 bar
The Unitor 10:1 Hydra-Clean chemical pump is ideal for a majority of fluid handling tasks onboard. Delivered ready to use and includes strainer, hoses, spray gun and nozzle. Pumps are designed to be mounted ...
Flow: 0 us gal/min - 170 us gal/min
Pressure: 7 bar
Length: 742, 754 mm
... handling corrosive fluids and large solids that would clog other pumps, this unique pump has been engineered to fully function in any position. This plastic solids handling AODD pump ...
Flow: 0 us gal/min - 160 us gal/min
Length: 450 mm
Width: 333.5 mm
... diaphragm pump, it meets compliance requirements for use in potentially hazardous environments, including mining. The 2" is available in aluminum, stainless steel, and Alloy C. ATEX ...
Flow: 0 m³/h - 1,850 m³/h
Head: 0 m - 120 m
... operating in optimal condition. The pump utilizes a flexible coupling, which allows the internal pump component to be removed without dismantling of the motor from the pump or the pump ...
Flow: 20 l/min
Pressure: 20 bar
Fluid temperature: 60 °C
Three-diaphragm pump with reinforced Polypropylene circuit, Kynar/AISI 316 valves (LFP version), AISI 316 diaphragm mounting components, Viton seals. Version: SP (cylindrical with shaft key), CR (reduction gearbox ...
Annovi Reverberi
Flow: 220 m³/h
Pressure: 16 bar
Head: 140 m
... product Stainless steel AISI 316L (1.4404) Other steel parts Stainless steel AISI 304 (1.4301) Gaskets in contact with the product EPDM Mechanical ...
INOXPA
Flow: 180 m³/h
Pressure: 10 bar
Head: 72'00"
... the flow optimised to avoid the obstruction of the pump, solid particles pass through the pump without being damaged. Close-coupled design. Helicoidal impeller. Pump casing with ...
INOXPA
Flow: 0.6 m³/h - 158.9 m³/h
Pressure: 0 bar - 16 bar
Fluid temperature: -10 °C - 140 °C
... designed lobes. The pump is authorized to carry 3-A symbol. Note: Consult the options of the pumps authorized to carry 3-A symbol. The SLR pump is a bare shaft rotary lobe pump. ...
INOXPA
Flow: 120, 80, 110, 50 l/min
Pressure: 40, 25 bar
Power: 7.5, 4 kW
... They function only as water booster equipped with injector systems. The boosters are equipped with stainless steel (AISI316), frequency pump with Blue Flux best efficiency label. The ...
Pressure: 40 bar
... Dosanova works with different brands of pumps (Interpump, Hawk, Mazzoni, CAT,...) depending on the requirements or customers preference. Frames are possible in powder coated steel, hot dip galvanized ...
Flow: 97, 71 l/min
Head: 20, 11 m
Power: 550 W
... and the pump tube acc. directives ATEX 2014/34/EU are required. The handy and powerful device can be used as a drive for the ATEX certified sealless pump tubes made of stainless steel ...
Dr. Jessberger GmbH
Flow: 82, 61 l/min
Head: 9 m - 20 m
Power: 400 W
... and the pump tube acc. directives ATEX 2014/34/EC are required. The handy and powerful device (5,5 kg) can be used as a drive for the ATEX certified sealless pump tubes made of stainless ...
Dr. Jessberger GmbH
Flow: 93, 74 l/min
Head: 26, 11 m
Power: 640 W
... and the pump tube acc. directives ATEX 2014/34/EC are required. The handy and powerful device (6 kg) can be used as a drive for the ATEX certified sealless pump tubes made of stainless ...
Dr. Jessberger GmbH
Flow: 0 l/min - 4,656 l/min
Pressure: 0 Pa - 2,000,000 Pa
... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...
Q-Pumps
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel ...
Flow: 1 m³/h - 66 m³/h
Head: 5.5 m - 68 m
Power: 0.33 kW - 7.5 kW
... multi-stage close coupled pumps in chromenickel stainless steel. Compact and robust construction, without protruding flange and with single-piece lantern bracket and ...
Calpeda
Flow: 1 m³/h - 7.2 m³/h
Head: 5 m - 40 m
Power: 0.33 kW - 0.75 kW
Horizontal multi-stage close coupled pump. Single-piece barrel casing in chrome-nickel stainless steel, with front suction port above pumps axis and radial delivery at ...
Calpeda
Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW
... close coupled pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). All parts that come into contact with the liquid, including wet-end covers, are in chrome-nickel ...
Calpeda
Flow: 0 m³/h - 550 m³/h
Pressure: 0 bar - 25 bar
The centrifugal pumps FP provide ultimate solution for hygienic applications. The pumps are available at low rate, but quality is not a problem as it is a strong unit with low maintenance requirements. The ...
Specifically suited for transferring toxic, dangerous and WHC goods. These magnetically coupled pumps are designed for applications with special safety requirements. The open impeller is connected to the driving unit ...
Flow: 160 l/h
Head: 30 m
Power: 2 ch
HANIL Electric Co.,Ltd
Flow: 2,560 l/h
Head: 32 m
Power: 0.33, 0.5, 1, 2 ch
HANIL Electric Co.,Ltd
Flow: 9,000 l/h
Head: 10 m
Power: 0.33 ch
HANIL Electric Co.,Ltd
Flow: 0 m³/h - 100 m³/h
Pressure: 0 bar - 80 bar
... geometries and pump sizes external cut surfaces wear parts can be replaced quickly via a separation point opposite the product robust bearing pedestal for high force transduction materials in contact ...
Flow: 0.01 m³/h - 4.6 m³/h
Pressure: 0 bar - 48 bar
The WANGEN progressing cavity pump type KB-SL Hygienic is a further development of the pump construction series for the food industry. In this area, where there is contact with the product, the stainless ...
Flow: 10 m³/h - 60 m³/h
Pressure: 12 bar
Power: 5.5 kW - 11 kW
... under control. Flexibility of use and structural strength. In order to achieve these results the pumps had to be equipped with a proportional hydraulic pump, capable of constant power adjustment and ...
Flow: 0 us gal/min - 7,000 us gal/min
Fluid temperature: 550 °F
Hot Oil Pumps Most of Cornell’s W, Y, RB and H series clear liquid pumps can be used in hot oil applications, allowing for flows up to 7,000 GPM and heads up to 540′. Features and Benefits: ...
Flow: 11 us gal/min - 770 us gal/min
Pressure: 15 psi - 87 psi
Fluid temperature: 200 °C
Refrigeration Pumps A Trusted Name in Refrigeration Pumps For more than 50 years, Cornell Pump Company’s innovative designs in refrigeration pumps have made us an ...
Flow: 0 us gal/min - 1,400 us gal/min
... service. Cornell’s auto-coupling system includes a cast iron discharge elbow, bronze guide claw flange, and stainless steel upper and intermediate guide rail brackets for high quality non-spark operation ...
Flow: 7 l/min - 40 l/min
Pressure: 2 bar - 8 bar
Input diameter: 90, 80, 48 mm
... high quantities and in highly corrosive environments. Data Sheet: The pump head, made of stainless steel, is realized by the full; The body pump is made of stainless ...
Flow: 1 m³/h - 100 m³/h
Pressure: 0 bar - 260 bar
... Reversible Easy to maintain Long lasting, proven design PCM standard pumps are available in cast iron, carbon steel and stainless steel. Benefits of PCM Oil & Gas ...
PCM
Flow: 0 m³/h - 55 m³/h
Pressure: 0 bar - 24 bar
... available in a range of materials including carbon steel, stainless steel, duplex steel and super duplex steel. The PCM's API 676 pump ...
PCM
Flow: 0 m³/h - 108 m³/h
Pressure: 0 bar - 24 bar
... examination. API documentation Materials Multiple options for a wide variety of applications, including carbon steel, stainless steel, and corrosion resistant alloys. Hardwearing ...
PCM
Flow: 84.9 l/min
Pressure: 2.07 bar
Power: 350 W - 388 W
... and cylinder Permanently lubricated bearings Stainless steel valves Lightweight cast aluminum components Long-life, high performance piston seal Thin wall, hard coated ...
Gardner Denver Thomas
Flow: 0 us gal/h - 56 us gal/h
Pressure: 30 psi
Fluid temperature: 5 °C - 40 °C
peristaltic pumps deliver unrivaled accuracy with simple-to-use HMI requiring minimal key presses during operation. Fluid is fully contained within the tube, providing complete isolation of the pump. ...
Watson-Marlow Fluid Technology Group
Flow: 7.5 l/min
Pressure: 580 bar
Weight: 55 kg
... mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivalled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers ...
GRACO
Flow: 80 l/min
Pressure: 30 psi - 100 psi
Power: 20 W
... EP1310C 1/10 Gallon Single Cartridge Pump System is a powerful, medium-ratio system for controlled fluid transfer from 1/10th gallon (310 ml) plastic cartridges. Suitable for silicone-type fluids, this low-pulse pump ...
Fisnar Inc.
Flow: 0.05 l/min - 6.5 l/min
Pressure: 6, 4, 15 bar
Fluid temperature: 0 °C - 95 °C
... Series Precision Gear Pump The Silencer Series gear pumps were designed from scratch to be everything a gear pump should be: durable, leak-free, reliable, chemically inert and quiet. ...
Diener Precision Pumps Ltd
Flow: 1.5 m³/h - 716 m³/h
Pressure: 0 bar - 16 bar
Head: 1 m - 160 m
Single-stage close-coupled volute casing pump, with ratings to EN 733, with replaceable shaft sleeve and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance ...
KSB
Flow: 6,360 m³/h
Pressure: 1,965,000 Pa
Head: 107 m
... Standard Model 3175 pumps can be fitted with a repeller between the stuffing box and impeller. At startup, the repeller functions like an impeller and pumps liquid from the stuffing box. When the pump ...
Goulds Pumps
Flow: 900 m³/h
Pressure: 100 bar
Head: 800 m
... and cooling water. Depending on the area of operation, they are made of cast iron, aluminum-bronze or stainless steel. ANDRITZ submersible motor pumps are characterized by zero maintenance, ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining