- Hydraulics - Pneumatics >
- Pump >
- Stainless steel pump >
- Aalborg
Aalborg stainless steel pumps
Flow: 0.12 l/min - 1.52 l/min
Small volume, high flow Easy to replace the pump tube Stainless steel rotor, long life Stepper motor, precise control Suitable for viscous and non-viscous liquid ...
Flow: 0 l/min - 1.52 l/min
Power: 75 W
Fluid temperature: 0 °C - 50 °C
... peristaltic pump is using stepping motor control, commonly used in low traffic and high precision setting, configure the touch screen 480 x 272, powerful, easy to operate. FEATURES AT A GLANCE ● Small ...
Flow: 45 l/min
Pressure: 2 bar - 6 bar
Input diameter: 1.5 in
... recirculation PUMP PERFORMANCE Ratio: - 8:1 b Max cycles / minute: - 60 Displacement per cycle: - 757 civil code Air consumption @ 6 bar: - 2700 Nlpm PUMP SPECIFICATIONS Lower pump ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... bar - 280 Nlpm SPECIFICATIONS: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. 316 SS ...
Airmation ECP srl
Flow: 8.4 l/min
Pressure: 2 bar - 6 bar
Output diameter: 0.8 in - 1 in
... 6 bar - 280 N.l.p.m. SPECIFICHE: Lower Pump Material - Stainless Steel Pumping stem material - Stainless Steel Hard Chrome opt. 316 SS ...
Airmation ECP srl
Flow: 23, 25 l/min
Pressure: 20 bar
Head: 5 m
Home Beer Brewing Pump TD5 Product Features: ● With food grade stainless steel, very safe and reliable ● Advanced magnetic driving technology for staticseal,without any leakage forever ● ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0 l/min - 14.3 l/min
Head: 3 m
Power: 13 W
... Impeller TypeOpen impeller Liquid Temperature0-110°C Food Grade(Y/N)Y Pump TheoryCentrifugal pump Motor Typebrushless DC motor http://www.topsflo.com/special-pumps/ts5-beer-brewing-pump.html
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 25 l/min
Pressure: 0 bar - 10 bar
Head: 4 m
... and at high pressure(145 Psi) Advantages over solar pumps from EL SID Solar DC Pump and Laing D5 Solar Pump Many of our clients also reflected application problems by using SID and ...
TOPSFLO INDUSTRY AND TECHNOLOGY CO., LIMITED
Flow: 0.03 l/min - 1 l/min
Pressure: 0 bar - 2.5 bar
Input diameter: 0.3 mm - 6.4 mm
LabDos® peristaltic pumps are displacement pumps on which rollers force the medium which is to be fed through a hose from the outside. The fed material thus does not come into contact with metal ...
Pressure: 0 bar - 150 bar
... a martensitic stainless steel body, are designed to withstand medium-high pressures at temperatures not higher than 120 ° C. They allow dispensing medium to high viscosity fluids. The body in martensitic ...
DAV TECH Srl
Pressure: 0 bar - 150 bar
... a martensitic stainless steel body, are designed to withstand medium-high pressures at temperatures not higher than 120 ° C. They allow dispensing medium to high viscosity fluids. The body in martensitic ...
DAV TECH Srl
Pressure: 0 bar - 150 bar
... a martensitic stainless steel body, are designed to withstand medium-high pressures at temperatures not higher than 120 ° C. They allow dispensing medium to high viscosity fluids. The body in martensitic ...
DAV TECH Srl
Flow: 9 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
ASTRAevo range is the ideal solution for most industrial applications. The pumps are conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, ...
Argal Pumps
Flow: 1,100, 1,280 l/min
Pressure: 8 bar
Head: 4.5, 6 m
The entire construction of the pump (body and air distributor) is made of AISI 316l making the MISTRAL series extremely resistant to corrosion, guaranteeing at the same time a robust and solid solution for continuous ...
Argal Pumps
Flow: 52 l/min - 715 l/min
Pressure: 0 bar - 8 bar
Head: 0 m - 80 m
... technology, ASTRAevo FOOD is a recent project too, conceived with the latest technologies to guarantee higher reliability of the pump, a longer life cycle of the diaphragms, reducing at the lowest the maintenance necessities, ...
Argal Pumps
Flow: 5 l/min
Pressure: 7, 315 bar
Weight: 60 kg
... equipped with a series of professional and performing accessories to ensure the maximum efficiency: the AT250 airless spray gun, compact and easy to handle, guarantees a high volume production; the airless hoses, available ...
LARIUS SRL
Flow: 180, 380, 550, 1.3 l/min
Pressure: 7, 3, 5 bar
Weight: 16 kg
... maximum efficiency; the L400 manual spray gun, compact and easy to handle, guarantees a reduced over spray and a high production volume thanks to the airless spraying assisted by a low pressure air jet. The ...
LARIUS SRL
Flow: 3.8, 400, 800, 850 l/min
Pressure: 5, 3, 7, 210 bar
Weight: 25 kg
... maximum efficiency; the L400 manual spray gun, compact and easy to handle, guarantees a reduced over spray and a high production volume thanks to the airless spraying assisted by a low pressure air jet. The ...
LARIUS SRL
Flow: 10 l/min
... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...
Bürkle
Flow: 20 l/min
... Suitable for steel barrels with R 2" thread - Thread adapter for commercially available containers and air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge ...
Bürkle
Flow: 4 l/min - 30 l/min
... tube models made out either PP, PVDF and stainless steel 304 cab be easily filled off. Various tube diameters can be individually adjusted to the required transfer volume. These pumps ...
Bürkle
... is a submersible multi-purpose pump which is mainly utilized for salt water. It has anti-corrosive and rust-proof components that comes with a engine casing, shaft, screws and nuts which is engineered with stainless ...
DAB
Flow: 0.0015 l/min - 0.009 l/min
Pressure: 0 bar - 30 bar
Power: 44 W
... technology The micro annular gear pump mzr-2505 covers the flow rate range 0.0015 - 9 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...
HNP Mikrosysteme GmbH
Flow: 0.003 l/min - 0.018 l/min
Pressure: 0 bar - 30 bar
Power: 44 W
... technology The micro annular gear pump mzr-2905 covers the flow rate range 0.003-18 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...
HNP Mikrosysteme GmbH
Flow: 0.012 l/min - 0.072 l/min
Pressure: 0 bar - 50 bar
Power: 44 W
... technology The micro annular gear pump mzr-4605 covers the flow rate range 0.012-72 ml/min. To the main assets of the device belong high precision, low pulsation, low volume dosage even of non-lubricating ...
HNP Mikrosysteme GmbH
Flow: 1.5 l/h - 60 l/h
Pressure: 2 bar - 16 bar
Power: 32 W
... head material between PP, PVDF and stainless steel allows the dosing of any commonly used chemical in the water treatment, chemical, food and agriculture industries. There is an APP available for ...
Flow: 0.1 l/min - 1.8 l/min
Pressure: 15 bar
... tempered stainless steel. Other parts are made in light weight metal. A «state of the art» parts finishing in addition to some hightech surface treatments - friction free - increase the pump ...
POMTAVA SA
Flow: 0.1 l/min - 2 l/min
Pressure: 15 bar
... with the product are made in tempered stainless steel. Other parts are made in light weight metal. A «state of the art» parts finishing in addition to some hightech surface treatments - friction free ...
POMTAVA SA
Flow: 0.1 l/min - 2 l/min
Pressure: 100 bar
Fluid temperature: 135 °C
The body, the center plate and gears, the rear cover, the drive shaft and the idler shaft are in tempered stainless steel. The pump seal is made up of combined sealing methods (liquid ...
POMTAVA SA
Flow: 1.3, 2, 2.7, 0.9 m³/h
... and 2 comprising: 1 metre 3/4” stainless steel pipe 2” bung 2 metre discharge Ø 25 hose Spout Stainless steel elbow Suction pump ...
Pompes Japy
Flow: 1.3, 0.9, 2 m³/h
... 3/4” stainless steel pipe 2” bung 2 metre discharge Ø 25 UPE hose Spout Stainless steel elbow Characteristics More Information FLUID Water, Diesel, Oil, ...
Pompes Japy
Flow: 2.6 m³/h
REVERSIBLE ROTARY MANUAL PUMPS MADE OF 316 L STAINLESS STEEL Descriptive Construction materials Body, cover, rotor, screws and bolts of the body: 316 L stainless ...
Pompes Japy
Flow: 5 l/min - 200 l/min
Pressure: 1 bar - 15 bar
Head: 1 m - 150 m
MD-CX Magnetic driven regenerative turbine electric pumps Hydraulic Performace Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal ...
Flow: 5 l/min - 110 l/min
Pressure: 1 bar - 10 bar
Head: 0 m - 100 m
Regenerative turbine electric pumps Hydraulic Performace Stainless steel mechanical seal electric surface pumps with peripheral impeller, ideal for increasing or maintaining ...
Pressure: 8 bar - 240 bar
Weight: 23 kg
... materials Easy operation and maintenance of the unit Fast start-up of the pump with very low air input Easy handling. The WIWA INJECT HD 4 and HD 5 are pneumatic 1K piston pumps characterized by ...
Pressure: 200 bar
Weight: 55 kg
... 14025 GX is a pneumatic 2K piston pump with a mixing ratio of 1:1. The material pumps are connected to the air motor, so no mixing errors can occur due to the positive control. The unit is equipped with ...
Pressure: 32 bar - 136 bar
Fast and service friendly maintenance With the WIWA 4-ball pumps, you can convey even the most difficult materials. Fields Of Application Paint circulation systems Feed pump Feed pumps Release ...
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
CTI INDUSTRIAL PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material - AISI 316L stainless ...
Tapflo
Flow: 0 m³/h - 76 m³/h
Power: 0.25 kW - 6 kW
CTH HYGIENIC PUMPS The CT pumps are open or semi open impeller single stage centrifugal pumps. They are manufactured in high finish and mechanically strong material - AISI 316L stainless ...
Tapflo
Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW
CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...
Tapflo
Flow: 600 l/h
Pressure: 0.3 bar - 2.5 bar
Power: 65 W
- Full PTFE bellows pump - Pump head can be rotated in 90° steps and connected to the gas line from the top or side - Max. capacity: approx. 10 Nl/min with a counter-pressure of ±50 mbar on the vacuum ...
Flow: 10 l/min
Pressure: 0.3 bar - 2.5 bar
Fluid temperature: 180 °C
- Analytical diaphragm pump for hot gas measurement - Pump head electrically heated up to +180 °C [+356 °F] - With high-temperature limiter and low-temperature alarm function - Max. capacity: 10 Nl/min ...
Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m
... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless ...
Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W
... Removable power cable. Water level sensor. Helical rotor pump. NERA pumps are equipped with a helical rotor that moves within a double helix rubber stator. The rotor is made of AISI 304 stainless ...
Flow: 2 m³/h - 215 m³/h
Power: 1.5 kW - 37 kW
Weight: 9.4 kg - 186 kg
... solar energy. The combination of VASCO Solar – VAriable Speed COntroller inverters with the complete range of stainless steel submersible pumps ranging from 4” to 10” offers a solution ...
Flow: 31 m³/h
Pressure: 8 bar
Head: 62 m
Wide range of pumps for domestic and industrial applications.
LOWARA
... problem with stainless steel or cast iron materials. 3. Discharge/suction flanges are using adhesive to connects to the pump. It will solve leakage or damage problems caused by connection ...
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless ...
Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... ability(Max.5M). Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless ...
Stainless steel pneumatic diaphragm pump Brief introduction The stainless steel pneumatic diaphragm pump uses compressed air as the ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Power: 22 kW
Rotor pump is called as rotary lube epump, sole pump, three-lobe pump, etc. When the simultaneously reverse-rotating 2 rotors (having 2-4 gears) revolve, they provide a suction force ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Pressure: 0.85 bar
... The cavity of the pump forms division into extraction and suction chambers by the control panel ensuring pressure tolerances near entrance and exits. Meanwhile, another important part played by the control panel is lubrication ...
ZHEJIANG XINGSHENG MACHINERY CO.,LTD
Flow: 34 l/h - 336 l/h
Pressure: 238 bar
Weight: 15 kg - 38.2 kg
The Williams “W” Series Plunger Pumps offer a packed plunger design The Williams “W’ Series is a piston plunger pump with a mechanical seal. It is capable of precisely injecting chemical into a wide ...
Flow: 38.32 us gal/min - 243.4 us gal/min
Pressure: 6.89 bar - 344.73 bar
Power: 0.04 kW
The Williams Solar Chemical Injection Pump (SCIP), previously known as the Solaroy®, is a highly efficient DC-powered injection pump operated by 12 or 24 VDC power. This solar pump was ...
Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m
... materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer increases durability for a broader range of applications 304 stainless ...
Flow: 103 m³/h
Pressure: 34 bar
... dead zones in the pump. Plus the stainless steel gearcase, bearing retainers, splash plate and cleanout plugs deliver maximum performance. The ZP3 technology and features make it the ...
Flow: 1,068, 418, 108 l/min
Pressure: 40, 20.7 bar
Power: 0.18 kW - 0.75 kW
... dosing pump SD Sandwich Hydraulic diaphragm metering pumps are normally used when: • The dosed liquid contains small amounts of suspended solids • No leakage are accepted • The dosed ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining