- Hydraulics - Pneumatics >
- Pump >
- Stainless steel pump >
- Aalborg
Aalborg stainless steel pumps
Flow: 0 l/s - 0.207 l/s
Pressure: 20 psi - 90 psi
Fluid temperature: 34 °F - 120 °F
... bar) Ultimate performance and reliability with extended service life Built-in auto shutoff, automatically shuts off pump when bag is empty and restarts when a full bag is connected Easy installation with ...
FLOJET
Flow: 14.81 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... control units for M series with filter pressure regulator, control pressure gauge and shut off valve: M4(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve ...
Maximator GmbH
Flow: 7.07 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M8(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 4.55 l/min
Pressure: 1 bar - 10 bar
Fluid temperature: 60 °C
... units for M series with filter pressure regulator, control pressure gauge and shut off valve: M12(L) with C To protect the pump against excessive outlet pressures or to limit the outlet pressure, a safety valve can be ...
Maximator GmbH
Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C
ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C
External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...
Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 50 bar
Fluid temperature: -20 °C - 100 °C
ECO.pump external gear pump Competent at metering viscous media up to 200,000 mPas, the ECO.pump lends itself to many common applications. The stainless steel ...
Pressure: 0 bar - 0.772 bar
... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...
Aalborg Instruments
Pressure: 0 bar - 0.848 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...
Aalborg Instruments
Flow: 0 m³/min - 6 m³/min
Head: 0 m - 180 m
Power: 22 kW - 110 kW
The LH-14-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 1 m³/min
Head: 0 m - 120 m
Power: 11, 22 kW
... LH-W-14-series is a submersible stainless steel casting high head corrosion-resistant pump having dual impellers designed for handling aggressive and corrosive liquids. The all wetted ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0 m³/min - 2.2 m³/min
Head: 0 m - 45 m
Power: 0.4 kW - 11 kW
The SFQ-series is a submersible stainless steel casting high head corrosion-resistant pump designed for handling aggressive and corrosive liquids. The all wetted parts are made of 316 ...
TSURUMI MANUFACTURING CO., LTD.
Flow: 0.05 l/min - 23.1 l/min
Pressure: 6 bar - 2,931 bar
Length: 450 mm
... lubricator and pressure regulator unit, lightweight fluid reservoir, pump start/stop valve and a robust stainless steel skid mounted framework. Optional extras include stainless ...
Hi-Force Hydraulic Tools
Flow: 0 m³/h - 540 m³/h
Head: 0 m - 320 m
Power: 45 kW - 250 kW
... ″ Evergreen grand series deep well / bore hole submersible pumps are single or multistage type supplied with mixed flow stainless steel impellers for higher flow and head requirement. ...
C.R.I. Pumps
Flow: 240 m³/h
Pressure: 32 bar
Head: 320 m
Vertical inline pumps are supplied with different material of construction suitable for high pressure application. The inline construction simplifies the piping work and major saving on floor space compare to other type ...
C.R.I. Pumps
Flow: 7 m³/h
Pressure: 7.6 bar
Head: 76 m
... multistage pumps are designed in single shaft construction which eliminates transmission losses between motor and pump. Major components of these pumps are made up of corrosive resistance ...
C.R.I. Pumps
Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...
Waukesha Cherry-Burrell
Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C
PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...
Waukesha Cherry-Burrell
Flow: 1.8 m³/h - 150 m³/h
Pressure: 10.3 bar - 34.5 bar
Fluid temperature: -40 °C - 149 °C
... 316L stainless steel product contact surfaces standard; 316L stainless steel or electropolish of all product contact surfaces optional Stainless steel ...
Waukesha Cherry-Burrell
Pressure: 0.06 MPa
Weight: 500 g
... resistance of the pipette pump components: (1) Pump head material: aluminium alloy; (2) Piston material: stainless steel. 06 End position optical detection End ...
Flow: 50 l/h - 990 l/h
Pressure: 0 bar - 10 bar
Weight: 38, 48 kg
... left-hand side. dosing pumps with the head on the right-hand side can be supplied. Duplex dosing pumps are available with the head combinations shown in the following tables. The heads are arranged in ...
Flow: 2.4 l/h - 30.7 l/h
Pressure: 1.5 bar - 20 bar
Power: 25 W
The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision of a motor-driven ...
Flow: 2.4 l/h - 30.7 l/h
Pressure: 3 bar - 20 bar
Power: 25 W
Precision that inspires The compact stepper-motor pump, coupled with its intelligent drive concept, combines the big advantages of a solenoid-driven diaphragm dosing pump with the precision ...
Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m
Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...
Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m
... ranging between 0.5 to 8 m³/h, and cannot be realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. ...
Flow: 8, 12, 18, 4 m³/h
Pressure: 5, 6, 9 bar
Fluid temperature: 100, 160 °C
... Disc Pumps have been specifically designed for air-sensitive and shear-sensitive products. They feature a unique seal-less design with a double stainless-steel bellows that ensures durability, ...
MOUVEX
Flow: 1 m³/h - 45 m³/h
Pressure: 16, 6, 9 bar
Length: 460 mm - 906 mm
... Series Eccentric Disc Pumps have been designed to provide premium performance and the ultimate in full containment and safety in chemical-processing applications. They feature a unique seal-less design with a double stainless-steel ...
MOUVEX
Flow: 1 m³/h - 36 m³/h
Pressure: 16, 6, 10, 9 bar
Length: 445 mm - 906 mm
... Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. They feature a unique seal-less design ...
MOUVEX
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous ...
Albin Pump
Flow: 14 l/h - 140 l/h
Pressure: 1 bar - 4 bar
Power: 0.18 kW - 0.25 kW
... - TUBE PUMP / ALBIN PUMP Specifications: Flow rate: up to 140 l/h (97 gph) Discharge pressure: up to 4 bar (60 psi) Maximum suction lift: - 9,8 m Hoses: Polyamide reinforced, NR, EPDM, NBR, ...
Albin Pump
Flow: 400, 350 m³/h
Pressure: 0 bar - 16 bar
Head: 160, 110 m
... within the given parameters. The throttle bush, journal bearing and seal placement reduce circulation and temperature along the pump length. This greatly reduces the temperature at the seal face and bearings. Suitable ...
Johnson Pump
Flow: 0 m³/h - 800 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 160 m
Horizontal centrifugal pump to ISO 2858 (EN 22858 (DIN 24256)) and ISO 5199 Standardized and modular design Flanges according to ISO 7005 PN 16 For stainless steel execution ...
Johnson Pump
Flow: 0 m³/h - 280 m³/h
Pressure: 0 bar - 16 bar
Head: 0 m - 140 m
... magnetic drive horizontal centrifugal pump to ISO 5199 and ISO 2858 /EN 22858 100% leak free Long life cycle, reduced maintenance costs Flanges according to ISO 7005 PN 16 For stainless ...
Johnson Pump
Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...
DESMI Pumping Technology A/S
Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C
Internal gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD ...
DESMI Pumping Technology A/S
Flow: 120, 100 m³/h
Pressure: 30 bar
Head: 65 m
... centrifugal pump designed for high media temperatures for boiler water application and district heating applications up to 180°C. Concept Features: • Duplex stainless steel shaft. • ...
DESMI Pumping Technology A/S
Flow: 23.9 l/min - 35.4 l/min
Pressure: 5, 10 bar
Power: 0.2 kW - 1.6 kW
... (Viton available on request). Parts in contact with spray liquid: polypropylene and AISI 316-L stainless steel on P 36/10, polyamide and stainless steel on P 36/15. On ...
COMET Spa
Flow: 7.2 m³/h
Power: 550 W
Fluid temperature: 110, 80 °C
Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...
Siebec
Flow: 10 m³/h
Power: 750 W
Fluid temperature: 110, 80 °C
Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...
Siebec
Flow: 14 m³/h
Power: 1,100 W
Fluid temperature: 110, 80 °C
Vertical pumps are ideal for transferring corrosive fluids. With no wearing parts such as mechanical stops or seals, they are guaranteed leak-free. SIEBEC offers plastic (PP or PVDF) and stainless steel ...
Siebec
Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m
The PIVOT Series AODD Pumps ranges from 3/8" to 3". Available in metallic and non-metallic materials such as aluminium, ductile iron, stainless steel, polypropylene, ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... diaphragm (AODD) pumps are available in metallic materials such as Aluminium, and Stainless Steel, with an extensive range of diaphragms, seats and balls. They offer ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... 1” (25 mm) Air Operated Double Diaphragm Pumps made of cast metal can reach a flow rate of up to 200 l/min (52 gal/min) and they offer a wide range of construction materials and porting configurations. ...
SAMOA Industrial, S.A.
Drum pump, interior in stainless steel with outlet elbow parts in contact with medium made from stainless steel 1.4301 and PTFE electro-statically ...
Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
Compact C Pump delivers reliable performance to the maximum duty requirements of your application in a compact package. Features include suction lift capability up to 28 feet, positive ...
NOV Inc.
Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
The Epsilon Pump is a line of technically engineered progressing cavity pumps designed to give least whole life costs and reduced spares requirements. The Epsilon Pump incorporates ...
NOV Inc.
Flow: 0 m³/h - 225 m³/h
Pressure: 0 bar - 12 bar
Fluid temperature: -10 °C - 100 °C
... design has no effect on flow and pressure • Low running speeds reduces wear for a longer working pump life; ideal for abrasive applications • Stainless steel cast components and fasteners ...
NOV Inc.
Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW
... Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical ...
Brinkmann Pumpen
Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW
... Construction Pump body - - cast iron Cover - - cast iron Impellers - - CrNi-steel Shaft - - CrNi-steel Diffusers - - CrNi-steel Mechanical seal - - SiC O-rings ...
Brinkmann Pumpen
Flow: 780, 1,000 l/min
Head: 33, 50 m
Power: 1.7 kW - 7.48 kW
Stainless Steel Immersion Pumps are centrifugal pumps of compact design with the impeller mounted directly onto the extended motor shaft. The TVG pump ...
Brinkmann Pumpen
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 200 °C
The ADP is a high precision external gear metering pump. With extremly small clearances and an optimal gear geometry the ADP has a very high volumetric efficiency also at difficult combinations e.g. high ...
... features Filling range from 1ml to 1000ml Technical data All contact parts with the products are made of aisi 316L stainless steel or FDA approved materials Quick dismanting for cleaning and sanitizing Version ...
Flow: 19 l/min - 1,200 l/min
Pressure: 7, 8.4, 8.6 bar
Head: 2.4, 2.5, 3.7, 4.5, 4.9 m
The VA industrial range really does set the benchmark for air diaphragm pumps. The range features fast-acting air valve technology – eliminating wasted air and using all of the air for moving the fluid. The efficient ...
Verder Liquids
Flow: 0 l/min - 1,135 l/min
Pressure: 0 bar - 8.6 bar
Head: 2.4, 8.5 m
... (HE) metallic pump is a compact, high efficient air operated double diaphragm (AODD) pump suitable for larger transfer/container emptying or as a basic dosing pump. The ...
Verder Liquids
Flow: 40 m³/h - 800 m³/h
Pressure: 3 bar - 40 bar
... industrial air handling pumps are available. The Packo basic hygienic stainless steel pumps are highly efficient and have a low NPSH value. These hygienic stainless ...
Verder Liquids
Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch
1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating:75kW/100HP Pressure Range (Deadhead) :60,000psi Flow ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining