{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Process temperature: 85 °C
Process pressure: 3.5 bar
... principle
The SOLIBA is a mechanical tilt
level
switch designed to detect high
level in silos, hoppers and bulk storage containers for grains, powders and granules. Suspended vertically at the ...
ATMI
Process temperature: 85 °C
Process pressure: 3.5 bar
... Overview
The SOLIBA EX P is an ATEX-certified tilt
level
switch (II 1 D Ex ia IIC T6) designed for high-
level detection of solid bulk materials in silos, hoppers and storage containers located ...
ATMI
Process temperature: -10 °C - 60 °C
... Overview
The SOLIBA MS is a compact membrane
level
detector designed to control high and low
levels in hoppers, silos and small containers. It also detects blockages and material build-up in ...
ATMI
Process temperature: -10 °C - 60 °C
... Presentation
The SOLIBA M is an economical membrane
level
switch by ATMI for detecting high, low or intermediate
levels in silos, hoppers and other storage containers. It is suitable for powders ...
ATMI
Process temperature: 85 °C
Process pressure: 3.5 bar
... modes.
Operating modes
- Drain mode: the level switch controls pump start/stop to prevent overflow and cuts power when the tank is empty (dry-run protection).
- Fill mode:
ATMI
Process temperature: 85 °C
Process pressure: 3.5 bar
... suited to confined
industrial and utility applications.
Operating principle
The tubular float rises and falls with the liquid
level. When the float reaches the set
level it tilts, actuating ...
ATMI
Process temperature: 85 °C
Process pressure: 3.5 bar
... Overview
The TUBA-1-1/4 tubular float
level
switch is designed for reliable
level detection in tanks, cisterns and confined vessels where access is limited. Its small Ø36 mm diameter allows ...
ATMI
Process temperature: 125 °C
Process pressure: 5.5 bar
... tubular float level sensor is equipped with a PTFE cable and a specially designed PVDF housing for extremely aggressive liquids, such as for example sulfuric acid and very hot liquids reaching temperatures up to 125°C. The TUBA 125 ...
ATMI