Flow Europe electric pumps

Flow: 0.3 us gal/h - 3.2 us gal/h
Pressure: 0.15 bar - 1.2 bar
Power: 15 W

... Start inputs built into the pump, enabling either proportional or On/Off control. • IP65 Equivalent Protection A robust housing protects the pump from normal wear. Mounting the Digital Display and Key ...

Flow: 0.6 us gal/min - 6.7 us gal/min
Pressure: 150, 290, 73 psi
Fluid temperature: -10 °C - 60 °C

... the EWN-Y Pump: • The EWN-Y Series pump combined with EFS flow sensor provides accurate real-time control and display of the dosing rate. • Set point control allows the desired ...

Flow: 5.2 us gal/h
Pressure: 73, 60 psi
Power: 84, 24 kW

Walchem and Iwaki have created a unique partnership with over 100 years combined pump experience in an array of different markets. The HV series is specifically designed to accurately feed high viscosity ...

Flow: 44 l/min
Pressure: 150 mbar
Power: 150 W

Our innovative vapour recovery pumps ensure safe use at filling stations all over the world. No matter whether you use belt drive or direct drive - we have the right products for vapour recovery. Please contact us and ...

Pressure: 10, 30 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Pressure: 40 bar

ViscoTec dispenser 3VMP18, as a volumetric dispensing pump for larger volumes, ensures smooth and reliable product supplying of abrasive, high-filled or shear sensitive material - with a repeatability of +/- 1 %! Absolutely ...

Flow: 0.033 l/min - 66.4 l/min
Pressure: 1 bar - 20 bar

ViscoTec dosing and filling pump type RD-hygienic for food and cosmetics is a volumetric conveying pump based on the endless piston principle. Suitable for discontinuous or continuous pulsation-free metering ...

Head: 8 m
Power: 3 kW

The PR 250 pumps are made of AISI 304 stainless steel and are suitable for transferring grapes and marc. The product is introduced into the hopper auger inside the pump casing, where it is pushed to the ...

... chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed low-cost electric motors. By simply changing the shaft rotation, pumps can ...

Flow: 0 m³/h - 9 m³/h
Pressure: 0 bar - 500 bar
Fluid temperature: -70 °C - 400 °C

packed plunger metering pump Its sophisticated modular system makes the LEWA ecoflow packed plunger metering pump the cost-efficient option for pumping fluids. For the LEWA ecoflow packed plunger ...

Flow: 16 l/h - 1,460 l/h
Pressure: 5 bar - 20 bar
Fluid temperature: -10 °C - 80 °C

... low-pressure range. In principle, high-pressure pumps such as the LEWA ecoflow can also be used here, though it is usually not efficient to do so. Another important reason to use mechanically actuated metering pumps ...

Flow: 16 l/h - 1,460 l/h
Pressure: 5 bar - 20 bar
Fluid temperature: -10 °C - 80 °C

Sanitary/hygienic diaphragm metering pump LEWA ecodos sanitary/hygienic is a safe, efficient diaphragm metering pump that provides many options for food and pharmaceutical production. The surfaces are ...

Flow: 825, 800 m³/h
Head: 129 m
Power: 90 kW

STANDARDISED MONOBLOC ELECTRIC PUMPS An incredibly extensive and efficient range which provides a flexible response to market requirements thanks to the numerous versions available with incredible delivery ...

Flow: 800, 700 m³/h
Head: 102, 80 m
Power: 90 kW

IN-LINE PUMPS Safe, highly efficient, adaptable and durable, the L range of in-line pumps with in-line fittings can pump fluids of up to 140°C as standard. They are used for circulation ...

Flow: 0 m³/h - 4,000 m³/h
Head: 0 m - 300 m
Power: 0 kW - 1,200 kW

... and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard). Applications: dams, ...

Flow: 4,000 m³/h
Head: 0 m - 200 m
Fluid temperature: 80 °C

The ClydeUnion Pumps Uniglide-e range is the latest generation of axially split, double entry pumps. The range has been developed using the latest 3D and FEA analysis software together with extensive ...

Flow: 20,000 m³/h
Head: 0 m - 300 m
Fluid temperature: 80 °C

... ClydeUnion Pumps Uniglide range consists of both configured and engineered to order axially split double suction pumps. Applications Desalination Water treatment, supply and distribution District ...

Flow: 2,500 m³/h
Fluid temperature: 80 °C

The ClydeUnion Pumps Duoglide range consists of both configured and engineered-to-order, axially split case, two stage pumps designed for higher head/flow applications. The Duoglide provides higher efficiency ...

Flow: 20 l/min
Pressure: -0.187 bar - 0.18 bar
Power: 21 W

The VC 0201B assembled by Nitto, is an AC Dual Pump that features an attainable vacuum of -187 mbar. This device is powered by a 230 V or 120 V of rated voltage with a 20 l/min of rated airflow. In addition, ...

Flow: 25 l/min
Pressure: -0.213, 0.1, 0.2 bar
Power: 27 W

... VC0301B is a diaphragm pump with attainable vacuum pressure -213 mbar and 25 l/min rated airflow. The rated voltage of the pump is 230 V and 120 V to produce maximum 0.2 bar pressure ...

Flow: 7 l/min
Pressure: -0.267 bar - 0.45 bar

The DP 0102S is a pump compressor that runs continuously on a 24 V rated voltage for 5.000 h. this model weighs 0.25 kg and is capable of reaching vacuum pressures up to -267 mbar with a 7 l/min maximum ...

Flow: 4 m³/h - 150 m³/h
Pressure: 18, 24 bar

... time required so far. NEMO® progressing cavity pump: Save costs due to FSIP® design In block construction with a flanged drive, this NEMO® pump is particularly compact and economical. ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

... progressing cavity pump even difficult substances can be conveyed gently and with low pulsation, regardless of fluctuations in pressure and viscosity. Low costs with the NEMO® BY progressing cavity pump In ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... The pump is ideally suited for high-pressure applications. Four different rotor/stator geometries are available, enabling the pump to be customized perfectly to your application case. Furthermore with ...

Flow: 0 l/min - 8.576 l/min
Pressure: 200 bar - 700 bar
Fluid temperature: -30 °C - 150 °C

Radial piston pumps The TR / TRG radial piston pump was designed for the high pressure range up to 700 bar and for uncritical, clear media. The pump is available in different versions. Moreover, ...

Flow: 0 us gal/min - 200 us gal/min
Head: 0'00" ft - 55'00"
Power: 0.25 ch - 3 ch

... maintenance-free pump and motor design. This design provides a worry-free, install-and-forget operation. The design incorporates the patented XL-11® precision-crafted bearing system. Advanced fluid ...

Flow: 0 us gal/min - 6,500 us gal/min
Pressure: 0 psi - 400 psi
Head: 0'00" ft - 600'00"

... 250°F (121°C). The pump internals are capable of being serviced without disturbing piping connections or electrical motor connections. Double-suction, base-mounted Series HSC-S pumps ...

Flow: 0 us gal/min - 725 us gal/min
Pressure: 0 psi - 580 psi
Head: 0'00" ft - 1200'00"

... Product Features The expanded hydraulic coverage of an e-SV pump combined with a NEMA premium-efficient motor delivers maximum performance The extended e-SV portfolio allows you to ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 0.35 l/min
Pressure: 10 bar
Power: 0.09 kW

... 4 BSP inlet. The pump motor is single phase. This pump is equipped with an automatic system that stops operation in the absence of lubricant in the reservoir. APPLICATION Oil ...

Pressure: 4 bar
Power: 2, 2.5 W
Fluid temperature: 30 °C - 30 °C

... This range of pumps is particularly suitable for use on lubrication systems, with a working pressure of 4 bar. The pump can be provided with or without a tank, is cam actuated and a spring controlled ...

Flow: 0.35, 0.5, 1.2 l/min
Power: 0.19 kW - 2.2 kW

These new electric gear pump units have been designed as the result of over thirty years experience in the field of developing and manufacturing gear pumps. The application possibilities ...

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

Pressure: 0 bar - 0.848 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar

... front panel with controls, a pump head with adjustable occlusion wall, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump and, when ...

Flow: 0.0006 l/min - 5 l/min
Input diameter: 1 mm - 8 mm
Length: 191 mm

... product or the pump itself is prevented. However, most instruments are difficult to program, are oversized and bulky. DOSE IT has been especially designed for laboratories looking for an easy-to-use, compact ...

Flow: 0 m³/min - 0.35 m³/min
Head: 0 m - 18 m
Power: 0.48, 0.75 kW

... portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power ...

Flow: 0 m³/min - 1.5 m³/min
Head: 0 m - 40 m
Power: 1.5 kW - 3.7 kW

... automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. This ...

Flow: 0 m³/min - 0.24 m³/min
Head: 0 m - 14 m
Power: 0.55 kW

The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump ...

Flow: 5,000 l/h - 14,000 l/h

... the motor shaft becomes the centrifuge shaft. The motor mounts directly beneath the bowl and its single shaft extends directly into the bowl. Driving the centrifuge directly from the motor ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 150 psi - 500 psi
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The Waukesha Universal 2 Series positive displacement pumps include advanced sanitation technologies, long life features and installation flexibility. ...

Flow: 1.1 m³/h - 102 m³/h
Pressure: 10.3, 15.5, 13.8 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS Tru-Fit models are available for U1, U2, Lobe and Twin Screw (UTS) positive displacement pumps. Tru-Fit pump model advantages include: ...

Fluid temperature: 15 °C - 40 °C

... spacing, which greatly increases pipetting velocity. 02 With a excellent-performance drive control unit The pipette is equipped with a excellent-performance drive control unit and provides CAN, RS232 ...

... Syringe Pumps Series, we also call Integrated sampling precision system is a precision sample addition component independently developed by Keyto. Its main function is to realize accurate and quantitative liquid aspiration ...

Pressure: 0 MPa - 0.6 MPa
Head: 2 m - 4 m
Input diameter: 0.3 in

... and discharge liquid(CV): - 0.5% Piston material: - Zirconia/Aluminium Oxide Pump head material：POM/PVDF/PPS/ETFE (open-moulded pump head ETFE only) Stepper motor (1.8°)：42 stepper ...

Pressure: 40 bar
Fluid temperature: -20 °C - 75 °C

The BL Lubricator is a motor driven gear pump available with either a 12 or 24 VDC motor. These lubricators are fitted to 3 liter reservoirs and are designed primarily for use with mobile equipment. BL Lubricators are ...

Flow: 0.005 l/min
Pressure: 250 bar
Power: 50 W

... controls the pump to delivers the rated amount of lubricant to the lubrication point at the right time. Each pump outlet has an over pressure protection valve and each outlet can support a lubrication ...