GEMS fittings

The tubular connectors RV is made up of chill casting of high-grade aluminum alloy. It's in accordance with DIN 1725. Its surface treatment is composed of rough state, drum polished, high-gloss polished, vibratory ground, dull finished ...

New, recessed, stud designed for use in Beswick elbow and tee fittings reduces installed height and simplifies installation. This new stud option is provided with a recessed 7/16 inch hex and can be easily tightened with ...

... contact a Beswick Engineering Applications Engineer. Beswick Engineering specializes in miniature liquid and pneumatic fittings, quick disconnects, valves and regulators. We have a team of degreed Application Engineers ...

Diameter: 0.125 in
Operating pressure: 0 psi - 150 psi

... captured O-ring seal design, for leak-tight sealing at both the threaded end of the fitting and at the tubing-to-fitting interface. Beswick Push-To-Connect style fittings permit ...

Diameter: 0.4 mm - 19 mm

COVAL proposes different models of male and female fittings adapted to the different suction cup ranges.

Diameter: 12, 10, 8, 6 mm

... distribution . Material: nickel-plated brass Models: . RDV: Straight Fitting . RCOV: Elbow Fitting . Y: Y Fitting

Diameter: 10 mm - 20 mm

Barbed fittings used to connect the vacuum source to the vacuum tube to guarantee a rigid connection. Material: brass Models : . RVM: Straight Fitting (Male) . RVF: Straight Fitting ...

Diameter: 0.13 in - 1 in
Operating pressure: 350 bar

Pressure-tight connections in seconds for pressure, function and leak testing. The Connector is designed for sealing standardized female thread applications for hydraulic and pneumatic pressure tests. The higher the test pressure the ...

Diameter: 0.13 in - 1 in
Operating pressure: 0 bar - 350 bar

The WEH® TW17 Quick Connector is designed for sealing standardized internal thread applications. The higher the test pressure the tighter the WEH® Connector will clamp itself into the thread of the test piece and provides a pressure-tight ...

Operating pressure: 350 bar

The WEH® TW17 Quick Connector is designed for sealing standardized internal thread applications. The higher the test pressure the tighter the WEH® Connector will clamp itself into the thread of the test piece and provides a pressure-tight ...

Diameter: 0.125, 0.09, 0.06, 0.17 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 0.125, 0.09, 0.06 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 0.062, 0.09, 0.125 in
Operating pressure: 0 psi - 125 psi

Swivel fittings connect tubing to a threaded hole. The barb (and tubing) can be freely rotated from the base. An integrated sealing bead provides a convenient and cost effective seal against the mating part. Barbed connections ...

Diameter: 0.13 in - 2 in
Operating pressure: 15 bar - 75 bar

The SP Cupla Type A is recommended for processes involving air, water, hydraulic oil, and chemicals. It yields a maximum working pressure of 15 to 75 bar. The housing materials of this coupling consist of steel, stainless steel, and brass. ...

Operating pressure: 0 bar - 10 bar

Hygienic Cupla - Easy Wash Type. For food manufacturing piping. Smart Connect and Disconnect. Easy disassembly and cleanability help in a hygienic management of HACCP. Suitable for food, drinking water, powder, air. Working pressure: ...

Diameter: 9.5 mm
Operating pressure: 10 bar

The Micro Cupla model manufactured by Nitto, is a low-pressure quick coupling that features a push-to-connect design. This device offers a compact construction, to deliver piping applications in narrow spaces. Moreover, it is lightweight ...

FITT Agix® is the first HRV distribution and diffusion system certified according to the EN 17192 European standard. FITT Agix® Cross is the complete and modular, quiet and performing Heat Recovery Ventilation solution that easily ...

Diameter: 0.5, 0.75 in

Body Material: SS316L Connection Size: ½"NPT(F) x ½"NPT(F) ¾"NPT(F) x ¾"NPT(F)

Diameter: 0.25 in - 1 in
Operating pressure: 0 bar - 1,550 bar

MAXIMATOR fittings and gland assemblies of the 1,550 bar series are designed for simple and safe connection of HP pipes up to a max. pressure of 1,550 bar. All gland assemblies are fit for multiple use. Fittings ...

Diameter: 0.25 in - 0.56 in
Operating pressure: 0 bar - 4,500 bar

MAXIMATOR fittings and bolted unions from the 4,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 4,500 bar This series consists of multipurpose bolted unions and ...

Diameter: 0.31 in
Operating pressure: 0 bar - 10,500 bar

MAXIMATOR fittings and bolted unions from the 10,500 bar range offers a low-profile and secured link of HP pipes that can handle the highest pressure of 10,500 bar This series consists of multipurpose bolted unions ...

Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar

The Z-swivel from Exitflex is the reference in the automotive industry. Its unique design provides ease of use and prevent injuries for painters and workers in all sorts of industries. Multi-directional 3-axis movement

Diameter: 0.25 in
Operating pressure: 0 bar - 550 bar

Five, high-precision metallic parts, made out of 303 Stainless Steel One friction washer, made out of PTFE One spring seal, made out of ultra-high molecular weight polyethylene Only 51 grams HIGHLIGHTS Rated at a maximum working pressure ...

COUPLERS The external coupler [DAC-E] consists of two parts: a fixed part for connection to the plant and a movable part connected to the pump by means of an optional threaded connecting pipe. The two parts can be connected and disconnected ...

COUPLERS The bottom coupler with vertical discharge DAC-V is compact and rugged, suitable for installation in small pits. It allows the pump to be connected to the system and easily disconnected for servicing or storage even without ...

COUPLERS DAC-V vertical discharge bottom couplers for use with pumps up to 1300 kg. Fixing by means of sliding flange or hook [KGP] (discharge DN350) with double guide pipe. A PATENTED guide pipe connection system that reduces mechanical ...

Diameter: 6 mm - 100 mm
Operating pressure: 25 bar - 40 bar

UNIONS CONICAL SEAT BW / BW - STAINLESS STEEL 316L

Diameter: 6 mm - 100 mm
Operating pressure: 25, 40 bar

UNIONS CONICAL SEAT BW / MALE - STAINLESS STEEL 316L Inox 316L

Diameter: 8 mm - 50 mm

UNIONS HOSE SHANK CONICAL SEAT - FEMALE HOSE SHANK - STAINLESS STEEL 316L

Diameter: 80, 50 mm
Operating pressure: 25 bar

Normative Regulation:EN 14 420-6 / DIN 28450 Coupling Material :Brass Gaskets Material :NBR , PU Connection Mechanism : Locking the lever from the female part

Certification : DIN ISO 9001 - 2000 Quality : 3D tactile measuring – 3D scanner – Test – Certificates ... Material Certification : Forging Material according EN 12420 & EN 12165 Material : All Brass types , Copper , Nickel Silver

Diameter: 80, 100, 50 mm
Operating pressure: 25 bar

Normative Regulation : EN 14 420-6 / DIN 28450 Coupling Material : Aluminium , Stainless Steel, Brass, PP Gaskets Material : NBR , FPM , PTFE , CSM , PU Connection Mechanism : Locking the lever from the female part

Operating pressure: 1,000 psi

• All fitting threads meet standards from DrySeal American Standard Taper Pipe Thread (NPTF) • Made from CA 360 and CA 345 brass • Top quality finish • Meet functional requirements of SAE J512, American Society of ...

Galvanised steel clamps for steel down conductors.

Brass clamps for copper lightning protection down conductors.

Clamp for “crow-foot” conductors earthing termination

Adaptation of up to 12° in all directions. Independent return to zero position.

Diameter: 6, 4 mm

Hose Connector, Return Valve - Made of plastic - Resistant to alcohol and acids - Food safe (Version LE) Suitable for all PVC and PU hoses with 4 mm nominal diameter save the EY6 Y-piece which is designed for 6 mm hoses.

Diameter: 8 mm
Operating pressure: 500 bar

C2.9501 Flow-control swivel banjo couplings C2.9501 Flow-control swivel banjo couplings adjustable max. operating pressure 500 bar ports: G1/4 or pipe ø8 mm

Operating pressure: 0 bar - 500 bar

F9.381 Quick-disconnect couplings F9.381 Quick-disconnect couplings one-hand operation “Push–Pull” ND 5 connecting thread G 1/4, max. operating pressure 500 bar internal thread: G 1/4 seals: FKM

Diameter: 20 mm - 100 mm
Operating pressure: 16 bar

Structure: • stator (outer part) and rotor (inner part) joined by a single-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: ...

Diameter: 125 mm - 700 mm
Operating pressure: 10, 16 bar

Structure: • stator (outer part) and rotor (inner part) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...

Diameter: 20 mm - 150 mm
Operating pressure: 16, 40 bar

Structure • stator (outer part) and rotor (innerpart) joined by a two-row ball bearing • for-life lubrication provided in the factory • welded connection parts: welding ends, pipe bends or flanges Materials: • basic unit: 1.7225 ...

Diameter: 3 mm - 10 mm
Operating pressure: 100, 200, 320 bar

GAUGE CONNECTION UNIONS For reliable connection of gauges Available in pressure ranges of PN 100, 200 and 320 bar Suitable for G1/2" gauge threads and all commercial types Available in DN3 to DN10 tube diameters Other thread diameters ...

Diameter: 3 mm - 50 mm
Operating pressure: 0 bar - 1,000 bar

WELD-ON TUBE UNIONS For permanent pipe connections With weld-on ends on both sides Available for tube diameters from DN3 up to DN50 Straight version, angles and Tee form Temperature-resistant from -270 °C up to +650 °C (dependent ...

Diameter: 3 mm - 50 mm
Operating pressure: 0 bar - 1,000 bar

SCREW-IN TUBE UNIONS For variable application With weld-on end and screw-in thread Available for tube diameters from DN3 up to DN50 Straight version, angles and Tee form Metric, Whitworth or NPT thread Temperature-resistant from ...

Diameter: 4 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar

STRAIGHT MALE ADAPTOR “UNIVERSAL SHORT” For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. ...

Diameter: 3 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar

STRAIGHT FEMALE ADAPTOR For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. It is the icon ...

Diameter: 3 mm - 14 mm
Operating pressure: -0.99 bar - 20 bar

BULKHEAD CONNECTOR For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. It is the icon of ...