Grundfos submersible pumps

Flow: 80, 100 m³/h
Pressure: 200, 350 bar
Head: 28 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to ...

Flow: 75, 250 m³/h
Pressure: 350, 300 bar
Head: 47 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to ...

Flow: 450, 1,000 m³/h
Pressure: 300, 350 bar
Head: 63 m

Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to ...

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference through: • Exclusive ...

Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m

... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller System ...

Pressure: 3,800 bar

... pressure of 4,136 bar, KMT WATERJET SYSTEMS offers the STREAMLINE SL-VI STD high pressure pump as a lower priced alternative still featuring KMT's advanced pump technology. The STD models can be operated ...

Flow: 7.2 m³/h
Fluid temperature: 0 °C - 50 °C

... borehole pumps. Unlike the conventional borehole pump which uses centrifugal force as the energy to move the water, the Subrotor submersible pump ...

Flow: 0 m³/h - 110 m³/h
Pressure: 12 bar
Fluid temperature: 18 °C - 35 °C

... helical rotor pump is inherently self-priming, so the pump can be positioned up to 6m above the water source, allowing the pump to be installed on the top of dam walls or on river-banks ...

Flow: 117 m³/h
Pressure: 15 bar
Fluid temperature: 18 °C - 35 °C

The Sun-Sub is a submersible pump and is the most popular Mono solar pump. Available, with either a stationary or GPS Tracking array, ranging from 150 Watts up to 2400 Watts, this water ...

Flow: 900 l/min
Head: 12, 27, 40 m
Power: 5 kW - 12.6 kW

Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the ...

Flow: 10 l/min
Head: 28 m - 140 m
Power: 0.48 kW - 1.75 kW

... .60° C Construction Pump body - - cast iron Pump shell - - steel Cover - - PBTP Intake strainer - - steel Impellers - - PBTP Shaft - - steel Mechanical seal - - SiC O-rings - - Viton ...

Flow: 0 l/min - 90 l/min
Head: 0 m - 270 m
Power: 0.48 kW - 4 kW

Immersion Pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies. In addition, the TH series offers high pressures at short immersion ...

Flow: 40 m³/h - 800 m³/h
Pressure: 3 bar - 40 bar

... Standard industrial pump range has a very high efficiency and very low NPSH. All pumps in this series are robust and easy to maintain. There are pump models in modular concept, composed ...

Flow: 0 m³/h - 800 m³/h
Power: 0 kW - 90 kW

The Packo submersible pump series IM are available in cantilever execution up to 0,5 m length but they are also available in an execution with support bushing till 1,5 m length. Particularly suitable ...

Flow: 0 m³/h - 1,000 m³/h

... Packo submersible cantilever pump series IML are designed for installation in a sump or tank, having only the casing and impeller submerged. Because the absence of a mechanical seal and slide bearing ...

Flow: 700, 1,000, 300 l/min
Head: 16 m - 24.5 m
Power: 1.1 W - 4 W

For the drainage of construction sites, trench ducts, and underground passages. Suitable to pump water out from cellars, garages and basements. Disposal of moderately heavy water containing some abrasive material. LIMITS ...

Flow: 400, 350 l/min
Head: 17, 27, 15 m
Power: 1.5, 1.1, 1.85 kW

The Cutty series comprehend electric pump with plunged impeller, this impeller is multi-pipe, open, with a cutting system in the suction. It is particularly suitable in presence of long, filamentous or fibrous fibres, ...

Flow: 400 l/min - 1,600 l/min
Head: 12 m - 30 m
Power: 1.1 kW - 7.5 kW

... - Continuous duty with completely submersed pump - Liquid density 1,2 Kg/dm3 ENGINE - Three-phase 230/400V-50Hz - Insulation Class F - Protection IP 68 MATERIALS - Motor body: Cast iron - Pump ...

Flow: 7, 12, 9 l/min
Head: 3, 5, 8 m
Fluid temperature: -40 °C - 100 °C

... ◇ Blocked protection ◇ Polarity protection Note: 1.pump itself meet: food grade 2. H type liquid≤105℃, not H normal type liquid ≤70℃ 3. can be customized submersible, if submersible ...

Flow: 0 l/min - 6.5 l/min
Head: 2.5 m
Power: 5.16 kW

... dispenser For more product & factory information, please contact info@topsflo.com http://www.topsflo.com/brushless-dc-pump/24v-dc-water-pump-tl-b03h.html

Flow: 7 l/h - 12 l/h
Head: 3 m - 8 m
Power: 7 W - 32 W

... heating mattress pump 3. Hot water circulating system pump 4. Electronics Cooling Water Circulation Chiller Systems pump 5. Liquid filling and transfer in food, beverage processing, ...

Flow: 0 l/min - 650 l/min
Pressure: 0 bar - 100 bar
Fluid temperature: 0 °C - 60 °C

High pressure pumps High pressure spindle pumps. Solution for deep boreholes and the high pressure clearance of chippings. PUMPED LIQUIDS Light, non-explosive, clean liquids with at least 5% of ...

Flow: 0 m³/s - 40 m³/s
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical immersion pumps are multistage centrifugal pumps for installation on the mounting flange of tanks. PUMPED LIQUIDS Light, non-explosive, clean or contaminated liquids. Water Cutting fluid Lubricants

Flow: 0 m³/h - 110 m³/h
Pressure: 0 bar - 40 bar
Fluid temperature: 0 °C - 120 °C

Vertical in-line pumps Vertical and multistage centrifugal pumps. The in-line design enables the pump to be installed on pipes where the suction and discharge ports are on the same horizontal ...

Flow: 0 m³/h - 900 m³/h
Pressure: 0 Pa - 800,000 Pa
Head: 0 µm - 200,000,000 µm

... External, single, or double flushing ​ FRP accessories to empower or adapt the pump to any plant Flanges reinforced in Kevlar (more resistant) On request: chance to choose pump colour Applications Aquarium, ...

Flow: 0 m³/h - 275 m³/h
Pressure: 8 bar
Head: 0 m - 90 m

K2 series comprises long vertical sump pumps with external electric motor and baseplate available in 3 sizes. Process sump pumps for aggressive liquids 3 versions according to the performance and ...

Flow: 2 m³/h - 50 m³/h
Pressure: 8 bar
Head: 0 m - 40 m

... bottom and outlet pipe at the top. These pumping solutions ensure a longer life cycle and less maintenance operations. Compact sump pumps HME version: cantilever shaft with column length: 274mm or ...

Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi

... multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's vertical turbine ...

Flow: 13,636 m³/h
Pressure: 74 bar
Head: 762 m

The VTP pump line is normally designed to operate in wells or sumps. Its bowl assembly consists primarily of a suction case or bell, one or more pump bowls and a discharge case. The pump ...

Flow: 13,636 m³/h
Pressure: 17 bar
Head: 175 m

... vertical circulator multi stage pumps consist of a bowl assembly, suspended on a discharge column from a base plate at the mounting floor. The length of the column is dictated by the application. Overview CHARACTERISTICS Pumps ...

Flow: 10 l/min

... solvent pump engineered by Burkle, is a hand operated barrel pump, suitable for the withdrawal of organic solvents and flavoring components. This device features a gas tight construction ...

Flow: 20 l/min

... air filters for ultra-pure drawing-off available as accessory Barrel pump for solvents with discharge hose and stopcock made of stainless steel/PTFE. Solvent pump foot operated ...

Flow: 4 l/min - 30 l/min

OTAL container pumps are characterized by its basic stopper system that can be used in most common containers. During the pumping process, only the tube comes in contact with the liquid. This means that liquids that are ...

Flow: 70 us gal/min
Pressure: 0 psi - 15 psi

WSP73 3/4 hp 115V submersible pump Top discharge 74 gal./min. capacity Automatic non-mercury float switch Double mechanical seal construction Rated for continuous use 50 ft cord

Flow: 40 us gal/min
Pressure: 10 psi

WSP33 (WSP33K1AA ) FEATURES 1/3hp 115V submersible pump Top discharge 40 gal./min capacity Lightweight durable stainless steel casing Automatic non-mercury float switch Rated for continuous use

Flow: 110 us gal/min
Pressure: 14 psi
Power: 0.5 ch

WSP50 (WSP50AA ) FEATURES 1/2hp 115V submersible trash pump Side discharge 110 gal./min capacity Solids handling capability up to 2" Automatic non-mercury float switch Rated for continuous use

Flow: 11 m³/h - 400 m³/h
Head: 7.6 m - 50 m

　　TZJL pumps are vertical type, the product is fixed above the slurry pool by the mounting plate, only the pump head is dipped in the slurry liquid, bearing and supporting parts are all above the pool, ...

Flow: 5, 2.7, 1.3, 0.9, 2 m³/h

... Semi-rotary manual pumps equipped with flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by graphite braid. NBR flange O-ring, ...

Flow: 0.9, 2, 1.3, 2.7 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: brass Waterproofing: by nitrile O-ring. NBR flange ...

Flow: 1.3, 2 m³/h

Semi-rotary manual pumps equipped with a flexible PVC hose Descriptive Construction materials Body: cast iron Mechanism: zamak Waterproofing: by nitrile O-ring (not suitable for ...

Flow: 0 l/min - 80 l/min
Pressure: 1 bar - 7 bar
Head: 0 m - 70 m

VP Vertical regenerative turbine electric pumps Hydraulic Performace Brass single stage vertical electric pumps with submerged regenerative impeller, ideal for maintaining the working pressure in open ...

Flow: 10 l/min - 130 l/min
Pressure: 0.2 bar - 0.8 bar
Head: 1 m - 8 m

... motor 230V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump from overheating even when partially submerged. Liquid temperature in continuous operation ...

Flow: 10 l/min - 170 l/min
Pressure: 0.1 bar - 0.7 bar
Head: 1 m - 8 m

Submersible drainage electric pumps Characteristics Single-phase motor 230V/50Hz with incorporated thermal protection with automatic reset. MWater cooled motor with top discharge protects the pump ...

Flow: 0 m³/h - 15.6 m³/h
Head: 0 m - 16 m
Power: 1.1 kW

CTV 25-11 PLASTIC CTV 25-11 is a 1" vertical pump in PP or PVDF with 1.1 kW motor, capacity of 15.6 m3/h and max head of 16 m. Performance curve The performance curves are based on water at 20°C. Other circumstances ...

Flow: 19, 34 m³/h
Head: 2 m
Power: 1.5, 2.2 kW

CTV 40-12.5 STAINLESS CTV 40-12.5 is a 1 1/2" vertical pump in stainless steel AISI 316 with 1.5-2.2 kW motor, capacity of 34 m3/h and max head of 22 m. Performance curve The performance curves are based on water at ...

Flow: 14, 13 m³/h
Head: 11.5 m
Power: 0.48 kW

... has a smart design bottom plate that enables the pump to operate and drain down to 1 mm water level. The pump is equipped with a swing valve that prevents reverse flow from discharge hose when the pump ...

Flow: 90 m³/h - 3,780 m³/h
Head: 15 m - 130 m
Power: 11 kW - 800 kW

Excavator driven hydraulic submersible sand dredging slurry pump 1.Product Description Our pump is mainly used as an accessory device of excavator, in the case of ...

Flow: 200 m³/h
Head: 30 m

... dredge pumps are mainly used as an excavator attachment taking place of a grab bucket when there is too much water, and mud and are not suitable for digging. It is driven by the excavator hydraulic system or a separate ...

Flow: 400 m³/h
Head: 40 m

The RELONG hydraulic submersible pump with agitator is a highly efficient and modular heavy-duty submersible dredge pump unit. The hydraulic dredge pump ...

Flow: 0 m³/h - 11 m³/h
Pressure: 0 bar - 16 bar
Head: 47 m - 120 m

... controlled by CM control module. - Multistage pump made of AISI 304 stainless steel. An inverter allows 4HS to: - Change pump speed to maintain set-pressure regardless of water demand. Consequently ...

Flow: 0.5 m³/h - 8 m³/h
Head: 10 m - 60 m
Power: 800 W

... the pumped water. The flow rate is directly proportional to pump speed while the pres-sure supplied is kept almost constant. In this way, unlike a centrifugal pump, the helical rotor pump ...

Flow: 0.5 m³/h - 3 m³/h
Head: 20 m - 100 m
Power: 1.3 kW - 3 kW

4HS MultiPower pumps (4HS MP), powered by renewable energy sources, is a new range coming from the 4HS pumps with built-in inverter. 4HS MultiPower pumps can be powered by AC or DC ...

Flow: 104 m³/h
Head: 36 m
Power: 7,500 W

• PP materials, PVDF • Connections DIN EN ISO 9906 Dry-run safe close coupled sump pump Highest operational safety because of bearing-less design partly suitable for particle loaded fluids Tailor-made mounting plates ...

Flow: 100, 120 m³/h
Head: 25, 55 m
Power: 15 kW

... conditions Available high-end sealing system for dry running capacity Support plates and custom connections, on request Sump pump with wetted axis and fluid lubrication Wide range of applications due to an extensive ...

Flow: 220 m³/h
Head: 55 m
Power: 45 kW

• PP materials, PVDF • DIN EN ISO 9906 • DIN, ANSI, BSP flanges Dry-run safe sump pump Non-wetted shaft bearing Robust tandem bearing for vibration-free operation Solid, exchangeable plastic components Tailor-made ...

submersible pump Spec Usage:Sewage Key Features *CV-series are designed for solid handling submersible pumps, enclosed with vortex impeller with spherical clearance ...