- Detection - Measurement >
- Position, Speed and Acceleration Measurements >
- Position sensor >
- MICRO EPSILON
MICRO EPSILON position sensors
ANG Sensors Description The ANG Series sensors are non-contact, intrinsically linear position sensors with one or two independent (redundant) outputs. The sensors ...
ZF switches and sensors
Measuring range: 50 mm - 4,250 mm
MDT 1000 is a Contactless linear position transducer with Sensilostrictive® magnetostrictive technology. The absence of electrical contact on the cursor eliminates all wear and guarantees almost unlimited ...
Sensilo
Rotork's extensive range of valve position sensors offer visual indication with digital, and analogue feedback and HART protocol communication capabilities. Our Soldo limit switch range is based on our ...
Measuring rate: 1.3 kHz
Supply voltage: 5 V
Ambient temperature: -25 °C - 85 °C
... sizes • Compact integration • TTL and CMOS compatible • Resolution up to 512 lines per revolution • Accuracy in speed and position feedback Customization Available • Axial and radial cable output available • ...
Measuring rate: 125 Hz
Supply voltage: 10 V - 30 V
Ambient temperature: -20 °C - 70 °C
Created for the rotary actuators DRVS and DSM, the position sensor SRBS-Q1/Q12 can be screwed quickly onto the actuators as a sealed and encapsulated unit in clean design. You can program the switching ...
Measuring range: 50, 80, 100, 125, 160 mm
Measuring rate: 1 kHz
Supply voltage: 24 V
The universal transmitter solution. With three options for signal evaluation: classic, analog, programmable switching output, or programmable IO-Link® output. The sensing ranges of the transmitter are perfectly coordinated to the standard ...
Ambient temperature: -40 °C - 85 °C
... suited for wheel, transmission and cam shaft speed sensing, geartooth sensors, rotary encoders, industrial, commercial and automotive applications. Rotary position geartooth sensor ...
Measuring range: 25 mm - 200 mm
Supply voltage: 15 V - 30 V
Ambient temperature: -10 °C - 60 °C
Actuator Position Sensor A smart move • Get continuous information on cylinder position – Piston position is output as an analogue signal or as a IO-Link process data • ...
... a precision touch sensor to determine workpiece offsets and tool length. They can be mounted on workpiece surface or machine table. An LED lamp illuminates immediately when the cutting edge touches the sensor ...
Measuring range: 3.5 mm
Measuring rate: 1 Hz - 208,000 Hz
High-precision non-contact absolute position measurement on up to 64 synchronized channels ZPS SensorZYGO's ZPS™ system measures absolute position using ultra-compact optical sensors ...
TDK offers both TMR sensors and Hall-effect sensors for angle measurements. TMR angle sensors are high-output, high-accuracy, and high-stability sensors that apply TMR ...
Analoge Hall encoderLinear motors can be positioned extremely accurately by using optical encoders and rulers. If this is not required this expensive setup can be replaced by an Analog Hall module. This module uses the magnet track, as ...
... ModuleFor commutation, we have an optional digital Hall module that can be used with our entire range of linear motors. Its sensors provide 3 digital outputs, each phase shifted 120 degrees, to determine the electrical ...
Supply voltage: 10 V - 30 V
Ambient temperature: -25 °C - 90 °C
G2.140 Magnetic sensors for position monitoring G2.140 Magnetic sensors for position monitoring of block cylinders and pneumatic swing clamps body material: aluminium, ...
Position or Level Potentiometer Transducer 1 Input - 1 Output accuracy class 1 (0,5 a richiesta/on request) response time <200msec sensor voltage ...
MC2OHM Position or Level Potentiometer Transducer class 0,2 1 Input - 1 Output accuracy dass - 0,2 response time - <200msec sensor voltage - 1,23V operating temperature - .0...+45...+50°C storage ...
Sender-Unit Gripper Design: The Sender-Unit gripper is available in two versions, which vary in input for the sensor: - Sender-Unit gripper switch (Order no. 560408): Cabled input for an M8-round connector - Sender-Unit ...
Measuring range: 50 m
... measurement for dynamic accuracy applications by determining the position (x, y, z) and angular orientation (pitch, yaw, roll) of a tracked point in real-time revealing the real-time true position and ...
Used in jigs and fixtures as positioning control for pre-machined workpieces. Sensitivity accuracy 0,015 - 0,075 mm depending on the workpiece surface. Contact control by the compressed-air backwash, indicated on the monitoring ...
Measuring range: 25 mm
Linearity: 0.5 %
Supply voltage: 24 V
The PT25LVDT industrial LVDT displacement transducers can be AC or DC powered and are sealed to IP65 as standard with the option of IP68 making them ideally suited for harsh and demanding applications where conditions ...
... of encoder is to be preferred, compared to other position transducers such as a potentiometer or an analog encoder, as it detects and reports the variations (increments) in relation to a reference position ...
For extra tool changer safety. To be used together with P1359. Inductive sensor that gives +24V signal ”TA present” when tool attachment is present at tool changer. To be mounted at the tool changer and used together ...
Axle load sensor GNOM DP is designed for cars equipped with spring suspension. System of levers is used when installing the sensor.
Technoton
... the calibration table. GNOM DP position sensor is installed on the rear axle or the rear bogie of the vehicle. A single sensor is enough to monitor vehicle axle and cargo load. Spring ...
Technoton
Wireless axle load position sensor GNOM DP S7 is used in transport telematics systems (GPS/GLONASS vehicle monitoring systems) to monitor axle loads, determine the axle load in vehicles with spring suspension, ...
Technoton
Measuring range: 15 mm
Ambient temperature: -10 °C - 85 °C
... range: -25°C to + 70°C Replaceable battery Dimensions: 105 x 50 x 27 mm Zone: Sigfox RC1 LoRaWAN® EU863-870 Sensor position Door open Door close
Supply voltage: 24 V
Ambient temperature: 0 °C - 70 °C
Infrared system, contactless, to measure fabric position and width.
Supply voltage: 24 V
... BIANCO Fluo is the ideal sensor for controlling any kind of centering devices with cylinders, slats or others. The BIANCO fluo allows different control modes for any kind of application, allows adjustment of the centering ...
Measuring range: 40 mm
Measuring rate: 100 Hz
Power consumption: 10 W
Double system, optical and mechanical sensor to detect fabric position
KERADOUCE® Integrated Measuring System. Our proprietary SMIKTM sensor provides the following technical data : - Position of the rod - Velocity of the rod - Acceleration et deceleration of the rod Our ...
Absolute Linear Measuring System - Integrated into the end cap of the hydraulic cylinder - Very high reliability over million cycles - Resolution ± 1/10 mm - Rod velocity up to 1 m/s - Acceleration up to 1 m/s2
... even less time You can reduce your reject rate with the TRUMPF seam position control. The sensor systems detect the joint gap during the welding process and control the welding position. ...
Supply voltage: 9 V - 32 V
Ambient temperature: -40 °C - 85 °C
Using the ROTARO rotary angle sensor, an angle can be reliably and precisely measured. The non-contacting, inductive angle determination allows the position sensor to function with absolutely ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining