NORELEM steel vises

Max. clamping force: 20 kN
Stroke: 6 mm - 154 mm

... Force: 20 kN Allowable Tightening Torque: 100 Nm -Materials- Body: SCM440 steel, Induction hardened, Black oxide finished, Precision ground Jaws Bases: SCM440 steel, Black oxide finished -Datasheet- https://www.imao.co.jp/files/on-cat/pdf/en ...

Material:Body and jaw holder mild steel. Spindle high-strength special steel.Version:Body and jaw holder hardened and ground.Note for ordering:Supplied with hexagon crank handle. Order jaw plates separately.Note:Mechanically ...

Stroke: 120 mm

... Includes pipe vice attachment Absolutely parallel with adjustable centric drive Extra high possible clamping jaws shaped by large embossed casting Large anvil for straightening and compression work Induction hardened ...

Stroke: 100, 120, 180, 210 mm

... hardened jaws and anvil Double start trapezoidal thread for quick opening and closing Vise forward opening Ground jaws, anvil plate and slide corners Special tool steel Function attribute 1: with ...

Stroke: 10 mm - 89 mm

Hinged V-shaped support Ideal for working with hydraulics and pneumatic lines Function attribute 1: hinged Weight [g]: - 6880 Packaging contents: - 1

Max. clamping force: 14,000 N
Stroke: 0 mm - 200 mm

... within a few moments to realize an enlarged clamping range. The robust 5-Axis Vise made of case-hardened steel guarantees the highest clamping quality and precision in workpiece clamping.

Max. clamping force: 14,000 N
Stroke: 0 mm - 85 mm

... Grip® FS 77 5-Axis Vise from LANG Technik is characterized by its compact design and high holding forces. Its strengths are particularly evident in the 5-axis machining of workpiece blanks. The centering vise ...

Max. clamping force: 14,000 N
Stroke: 120 mm

The Makro•Grip® Night King is a pure 5-axis vise that is reduced to the essential requirements in 5-sided machining: Holding power and accessibility. The form-fit clamping principle guarantees maximum process reliability, ...

Max. clamping force: 25, 40, 60 kN

Hydraulic actuation on request. • Sturdy steel body and all guides are hardened and ground on all sides • Long clamping slide with cross slots, hardened on all sides, functional surfaces ground • Threaded bores for ...

Max. clamping force: 40, 25 kN

... spindle thread can be lubricated quickly and easily Horizontal, vertical or side mounting Vice with two movable clamping jaws and a stationary center jaw Steel basic body as well as all guides hardened ...

Max. clamping force: 30, 50, 60 kN

... Scope of delivery, complete with clamping wrench, workpiece stop and four clamping claws • With draw-down jaws • Hardened steel body (60 HRC) • Clamping repeatability 0.02 mm Einsatzbereich For universal use on ...

Max. clamping force: 7,600 N - 55,000 N
Stroke: 2 mm - 15 mm

Clamping force blocks, pneumatic, with fixed jaw One fixed jaw Force up to 55,000 N Stroke up to 15 mm Stroke control Rating IP 40 Centralized lubrication Pressurization

Max. clamping force: 16 kN
Stroke: 20, 100 mm

Clamping force blocks, manual, centric clamping Compact from 80x90 mm Self-centering Clamping force 16.300 N stroke 20 and 100 mm Version to blank the workpiece

Max. clamping force: 200 N
Stroke: 10 mm

Clamping force blocks, hydraulic, centric clamping Clamping force 200.000N Self-centering Stroke for jaw 5 mm Pressurization Central lubrication Rating IP 40

Max. clamping force: 25, 40, 21, 38 kN
Stroke: 35 mm - 116 mm

WS5.4600 Workholding Systems SCS clamping against the fixed jaw mechanically or hydraulically operated jaw widths 80 and 120 mm

Max. clamping force: 25, 40, 50 kN
Stroke: 0 mm - 546 mm

WS1.3070 Workholding Systems NC clamping against the fixed jaw jaw widths 100 | 125 | 160 mm

Max. clamping force: 8, 15, 25, 35 kN
Stroke: 50, 101, 20, 30 mm

WS5.4501 Workholding systems MC-P mechanically operated jaw widths 40, 60, 100 and 125 mm

Max. clamping force: 16 kN - 40 kN
Stroke: 100 mm - 800 mm

... most popular (and copied) vise in the world - The perfect mix: price, quality, versatility. All GERARDI vises and accessories are modular and components of all our vises will interchange ...

Max. clamping force: 16 kN - 40 kN
Stroke: 100 mm - 800 mm

The most advanced vise! Innovative comb system for manual quick pull-down jaw plate changes! The vises of the StandardFLEX series are an evolution of the Standard vise series. Their ...

Max. clamping force: 16 kN - 40 kN
Stroke: 290 mm - 1,000 mm

Vises with the extra large base dimension, much longer than STD vises. Space on the Machine table sometimes is tight, XL vises enable to have 2 vises in one because ...

Max. clamping force: 1,300 kgf

... machine ✅Compatible with Robotic Arms Detailed Information: https://www.homge.com.tw/five-axis-adjustable-self-centering-vise-asc-s ZERO POINT: https://www.homge.com.tw/zero-positioning-quick-change-devices

... clamping 1) Vise body is made of High quality Steel (S50C) and its slideways gone through high-frequency hardening to achieve HRC50, which makes the whole part durable. 2) Detachable jaws are ...

Max. clamping force: 0 kgf - 5,000 kgf
Stroke: 105, 167 mm

... which enhances machine space utilization. 2.Vise jaws are made of High quality Tool Steel (SCM440) and Hardened to achieve HRC 55° , which makes vise clamp the workpieces easily and ...

Max. clamping force: 50,000, 40,000, 30,000, 16,000 N
Stroke: 19 mm - 114 mm

The self-centering vise-series MZR is used as a cost-effective clamping tool for clamping raw parts on multi-axis machining centres. With its compact, maximum access to the workpiece on multi-axis machining centers ...

Max. clamping force: 5,000 N - 70,000 N
Stroke: 12 mm - 178 mm

... centre-clamping vise solution for work on pallets or automation systems. Advantages at a glance Maximum access and wide clamping range Suitable for external and internal clamping Interchangeable clamping jaws Material: ...

Max. clamping force: 70, 30, 40, 16, 50 kN
Stroke: 19 mm - 175 mm

... are covered. The centre-clamping vise type MZU is especially suitable for flexible raw parts clamping. Advantages at a glance Small disturbance range Maximum access Large clamping width Material: modified steel, ...

Stroke: 0 mm - 100 mm

... Unlike traditional vises the TriMax G clamps workpieces by means of traction clamping. The vise has one fixed jaw and one moving jaw that moves on hardened and ground shafts, allowing for quicker and ...

Stroke: 150 mm

TriMax M vises increase clamping capacity with extended base lengths up to 878 mm. XL vises in the TriMax M line feature extended base lengths (758 mm and 878 mm) for increased clamping capacity. Its ...

Stroke: 60 mm

TriMax T Series of vises is a complete multi-part clamping system that reduces downtime and maximizes machine tool capacity. Made to clamp up to four workpieces at a time, multiple movable jaw sets can ...

Max. clamping force: 32, 43, 45 kN

... during clamping thanks to its angled jaws. * The entire body of the vices is made of special alloy steel. it is resistant to wear and tear. * All working surfaces of the vice are ...

... the possibility to process the workpiece. * The entire body of the vices is made of special alloy steel. it is resistant to wear and tear. * All working surfaces of the vice are ...

Max. clamping force: 0 kN - 20 kN

... precision multi-series lashing vices, allows multiple workpieces to be processed. * The entire body of the vices is made of special alloy steel. it is resistant to wear and tear. * ...

Max. clamping force: 903, 17,894, 9,695, 6,232, 2,938 N
Stroke: 3, 1 mm

SELF-CENTERING VISE WITH WEDGE-HOOK MECHANISM AND PNEUMATIC DRIVE – 2 JAWS Precision vise with reduced cycle time. Used on working machines and equipments to clamp the item with maximum precision. ...

Max. clamping force: 5,200, 229 N
Stroke: 10, 5 mm

... on the machinery. ADVANTAGES • Vise closed by springs. Push the bush using a pneumatic piston to open the chuck • Graduated gripping force depends of springs inside the chuck . • Caseharden and hardened steel; ...

Max. clamping force: 21,000 N
Stroke: 40 mm

AUTOMATIC INDEXING VISE The AIV indexing vises are specific products for installation on the table of milling machining centers, with non-self-centering closure.The machine tool table must be prepared ...

Max. clamping force: 1,000 kgf - 3,000 kgf

FLEXIBLE VISE One way clamping Material 100% tool steel Heat treated HRC 55° & ground Clamping force: SVF-50 : 1000 kgf SVF-72 : 2000 kgf ...

ALUMINUM VISE Material: High strength aluminum A7075 (Hard coat surface) Tool steel (Hardness: over HRC 55°) Application: Ideal for aluminum or irregular shaped work pieces.

Max. clamping force: 25, 30 kN
Stroke: 150, 200, 300, 400, 500 mm

Vektek Standard Vise - Features The Most Popular • All steel construction hardened and ground HRc 60 • Accuracy within 0.0008" • Gang operation • Pull down jaws • Space saving design • No wear ...

Max. clamping force: 25, 40, 30 kN
Stroke: 300, 200, 500, 400 mm

Vektek Flex Vise™ - Features Innovative quick change jaw guide system for pull-down jaws Same as Standard, PLUS... • Vertical gang operation • Great savings in vise resetting times • Better protection ...

Max. clamping force: 20 kN
Stroke: 128 mm

Compact Power Vise for small drilling / tapping machine. Jaw Stroke (mm): 128 Jaw Width (mm): 100 Hardened and ground steel body construction for rigidity high accuracy. Kitagawa's VC Series ...

Max. clamping force: 17 kN - 26 kN
Stroke: 22 mm - 25 mm

Centring vice for flexible applications. Absolute operational reliability thanks to enclosure. High repetition accuracy 0.02 mm. Variable central alignment ± 0.02 mm. Functional faces hardened. ...

... malleable cast iron vice. Reversible frame for obtaining the best working position on workbench, tripod or table. Hardened steel jaws. V-shaped pipe holder.

Jergens 5-Axis Block Dovetail Vises mount directly to rotary tables, Fixture-Pro® Risers, or any QLS Grid. They reduce the distortion of parts and require very little material (0.060” or less) to clamp. Features, Benefits, ...

Max. clamping force: 306 N - 12,420 N
Stroke: 10, 5, 6, 8 mm

... working precision vise easy to put on the machinery. Used on working and assembly machinery tain number of vise is required. Springs closed system allows to save money on hydraulic or pneumatic systems ...

SEOAM manufacturers a series of hardened carbon steel power vises designed to work with milling machines, CNC machines centers, etc.

The RWP-019-4X90T Series of 4-Side Vise/Vertical, manufactured by Raptor Workholding Products, is specifically designed as raptor nest tombstone mount. It can be mounted to the top of any of the fixtures of RWP-001, RWP-001SS, ...

SPECIFICATION SIZE 130X100X80mm MATERIAL STAINLESS STEEL 420 48-52HRC APPLICATION WITH G PLATE,CANTER TOLERANCE ± 0.1mm

Max. clamping force: 3,000 daN - 10,000 daN

Precision machine vises FPZB are widely used on milling machines , grinding machines, electroerosion machines and CNC machining centers. Properties and application: Made of high-quality alloy steel ...

High precision, solid one-piece steel construction with body and jaws hardened to Rc 58-60. Angled center channel provides extra jaw capacity. Movable jaw pulls into base at 45 to 60° to insure maximum holding ...