{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{product.productLabel}} {{product.model}}
{{#if product.featureValues}}{{product.productPrice.formattedPrice}} {{#if product.productPrice.priceType === "PRICE_RANGE" }} - {{product.productPrice.formattedPriceMax}} {{/if}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Gap fill: 0.5 mm
... required. It has excellent chemical and high temperature resistance or up to 200°C Surface Preparation Though the anaerobic adhesives will tolerate a slight degree of surface contamination, best results are obtained on clean, dry ...
Permabond
Gap fill: 0.1 mm
... low-viscosity, high-purity cyanoacrylate adhesive. It is ideal for use on hard-to-bond plastics and rubbers such as natural rubber, EPDM and butyl rubber. Cyanoacrylate adhesives are single component adhesives ...
Permabond
Gap fill: 0.5 mm
... for Use 1) Shake bottle before use. 2) Apply the adhesive sparingly to one surface. 3) Bring the components together quickly and correctly aligned. 4) Apply sufficient pressure to ensure the adhesive spreads into ...
Permabond
Gap fill: 0.15 mm
... frosting and fogging. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. ...
Permabond
Gap fill: 0.25 mm
... bondlines, common with other cyanoacrylate adhesives on hot and humid days, is eliminated. The elimination of fogging improves the production rate of acceptable parts as well as their appearance. The adhesive is very ...
Permabond
Gap fill: 0.5 mm
... ceramics and wood. Cyanoacrylate adhesives are single component adhesives that polymerize rapidly when pressed into a thin film between parts. The moisture adsorbed on the surface initiates the curing of the adhesive. ...
Permabond
Working temperature: 120 °C
... oxide layer. Directions for Use 1) The adhesive should be dispensed from the cartridge via the nozzle supplied (this can be cut to give the appropriate sized bead to cover the bond area). 2) Apply the adhesive to ...
Permabond
Gap fill: 2 mm
Working temperature: 40 °C - 50 °C
... PERMABOND® ET500 is a two-part fast-setting epoxy adhesive which bonds to a wide variety of substrates such as wood, metal, ceramics and some plastics and composites. It cures rapidly at room temperature to give handling strength in approximately ...
Permabond
Gap fill: 5 mm
Working temperature: 50 °C - 60 °C
... PERMABOND® ET5428 is a thixotropic two-part adhesive with excellent resistance to impact and vibration. The controlled flow properties as well as its ease of mixing and application, enables the adhesive to be used where ...
Permabond
Working temperature: -40 °C
Viscosity: 100, 10 Pa.s
... dry and grease-free. If using a cleaning solvent, allow 3-4 minutes to fully evaporate before applying adhesive. 2) Apply a thin bead of adhesive pre-mixed through a static mixer nozzle. If no mixing nozzle is being ...
Permabond