DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by ...
SISTO Armaturen S.A.
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... Flue gas desulphurisation Shipbuilding Swimming pools Process engineering Heat recovery systems Hot-water heating systems Water treatment Water extraction
SISTO Armaturen S.A.
DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C
... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, Y-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle ...
SISTO Armaturen S.A.
Pressure: 5 bar
... Rotary Tube Selector Valve diverts pneumatically conveyed powders and granules from one line up to any of sixteen lines. Flow can also be converged from multiple lines into one line. Valve is often used ...
Pressure: 500,000 Pa - 700,000 Pa
... Selector Valves are flow diversion valves that employ an axially mounted plate to control the flow of pneumatically transported materials. Flow may be diverted to one of two tubes, which intersect at ...
DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar
... resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification ...
DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar
The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable ...
Beswick Engineering Co, Inc.
DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar
The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...
Beswick Engineering Co, Inc.
DN: 1.78 mm
Pressure: 500 psi
Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About ...
Beswick Engineering Co, Inc.
DN: 6, 12, 16, 10 mm
Pressure: 0 bar - 69 bar
Temperature: -20 °C - 190 °C
BALL VALVE FOR TWIN FERRULE FITTING - STAINLESS STEEL 316
BENE INOX
DN: 10, 15, 8, 25, 20 mm
Pressure: 63 bar
Temperature: -20 °C - 150 °C
MINI BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - STAINLESS STEEL 316
BENE INOX
DN: 8 mm - 50 mm
Pressure: 55 bar
Temperature: -20 °C - 150 °C
1 PIECE BALL VALVE - FEMALE / FEMALE BSP - REDUCED BORE - LOCKABLE HANDLE - STAINLESS STEEL 316
BENE INOX
DN: 2 mm
Pressure: 0 bar - 8 bar
This poppet valve was specifically designed to be utilized in management units. Due to its hexagonal shape, the valve requires only a small amount of workspace. It is an energy-efficient valve ...
DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °C - 66 °C
... suitable for the flow of liquids and incisive gases. It is compatible for the utilization with MVT™ PTFE Precision Needle Valves. It can operate components within the volumetric range of 30 SLPM for ...
DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C
VB precision barstock valves are intended for controlling low flow rates of fluids and gasses. The Mfv™ Barstock valves can be obtained in six helpfully overlapping orafice needle sizes. Offered in straight ...
DN: 0.75 in
Pressure: 0 bar - 138 bar
Temperature: 0 °C - 200 °C
... replacement valve with Brooks® purge meters. The Cartridge III Valve is a multipurpose valve, designed for use with Brooks® purge meters in gas and liquid flow applications. ...
DN: 8 mm - 150 mm
Pressure: 125 bar
Ball valve for applications in corrosive media (e.g. chlorides and dilute acids). With a PREN value between 42 and 47, suitable for seawater. 3-piece body, pressure class depending on the nominal size up to PN 125, floating ...
GEFA Processtechnik
... conditions caused by traditional flow diversion valves, extending the life of the valve and surrounding process equipment. The W265 HTST valve assembly comes complete with 1 or 2 Microswitches ...
The 2/2 way ball valve of the T-EAV901 Series is electric actuated with an AISI 316 stainless steel body and a screwed connection. The valves come in two different type such as on-off controlled electric ...
SMS-TORK
Pressure: 16, 40 bar
Temperature: -20 °C - 160 °C
... and is connected to valve as per ISO5211 connections and flange connections are F03/F05/F07. It has a working temperature of 20-160 degrees C, working pressures of PN 40 bar (1/2"...11/4") and 16 bar (11/2"...3") ...
SMS-TORK
Pressure: 0 bar - 16 bar
Temperature: -30 °C - 130 °C
... T-EAV800 electric actuated butterfly valves is a series of valves that works on different mediums: water,hot water, air, aggressive fluid, food industry, gas, oil and ...
SMS-TORK
DN: 2 mm
Pressure: -70,000 Pa - 250,000 Pa
... under pure water） Tube Size - 2*4 mm Main Features - 1. Used with hoses, the medium only exists in the pipeline. 2. Reduce cross contamination 3. Easy to install and maintain Application - 1. Can be used ...
Keyto Fluid Technology
DN: 6 mm
Pressure: -70,000 Pa - 80,000 Pa
... under pure water） Tube Size - 6*9 mm Main Features - 1. Used with hoses, the medium only exists in the pipeline. 2. Reduce cross contamination 3. Easy to install and maintain Application - 1. Can be used ...
Keyto Fluid Technology
DN: 1.5 mm
Pressure: -70,000 Pa - 2,000,000 Pa
... under pure water） Tube Size - 1.5*3 mm Main Features - 1. Used with hoses, the medium only exists in the pipeline. 2. Reduce cross contamination 3. Easy to install and maintain Application - 1. Can be used ...
Keyto Fluid Technology
DN: 6, 14, 8, 10 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
DN: 10, 6, 14, 8 mm
Pressure: -1 bar - 20 bar
Temperature: -30 °C - 130 °C
TAPER MALE R ISO 7 - FEMALE RP ISO 7 VALVE The GHILUX miniature ballvaves have been created and engineered by Aignep in the 90’s. The supercompact dimensions and the excellent performance respond to the growing demand ...
DN: 5.5 mm
Pressure: -1 bar - 40 bar
Temperature: -15 °C - 180 °C
FEMALE RP ISO 7 - FEMALE RP ISO 7 VALVE The 66.000 serie is made of stainless steel AISI 316L function fittings: flow controls for cylineders, in-line and banjo fittings, unidirectional valve, quick ...
DN: 15 mm - 50 mm
Pressure: 20, 25 bar
Temperature: -20 °C - 80 °C
general processes, heating and hall fluid applications compatible with brass BALL VALVE : brass Full bore BALL : hard chrome-plated brass SEALS : PTFE With drain off cock and plug
SOCLA
DN: 8 mm - 50 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M BALL : Stainless steel 316
SOCLA
DN: 8 mm - 80 mm
Pressure: 63 bar
Temperature: -25 °C - 180 °C
industry, high temperature, high pressure PRESSURE PFA/PS in bar BODY : CF8M
SOCLA
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -20 °C - 80 °C
... nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 16 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
DN: 10 mm - 80 mm
Pressure: 10 bar
Temperature: -10 °C - 50 °C
... the union nut Integrated bracket for fix point mounting Integrated fixations for the modular adapter set: one-piece injected valve body Cushion O-ring for PTFE-seat Double sealed shaft Locking handle with integrated PLS ...
Praher Plastics Austria GmbH
Part 0006522676 air fill valve for portable stainless steel tanks.
Haws AG - Headquarters for Europe, Middle East and
Pressure: 0 bar - 15 bar
Temperature: -40 °C - 125 °C
Auto Drain Valve with inbuilt water-in-fuel (WIF) sensor for water-fuel separator with redundancy feature in the form of ball mechanism to prevent any fuel leaks.
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing the flow rate and ...
FIP - Formatura Iniezione Polimeri
DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C
... prevent any risk of corrosion. - New valve body internal design. Substantially higher flow coefficient and lower pressure drops. The degree of efficiency reached has also enabled the size and weight of the valve ...
FIP - Formatura Iniezione Polimeri
DN: 10 mm - 50 mm
Pressure: 16 bar
Temperature: -40 °C - 140 °C
FIP has developed a VKD DUAL BLOCK® ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball valve that meets the most stringent needs ...
FIP - Formatura Iniezione Polimeri
Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C
... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed ...
AIRTEC Pneumatic
DN: 15 mm - 600 mm
Temperature: 0 °C - 260 °C
Flanged end connection resilient seated ball valve Our top performing flanged ball valve Features Robust engineering design Self relieving seat technology Low emissions stem seal technology High quality Benefits Very ...
DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C
Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External ...
DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C
... full bore • Gate valves are bi-directional and can be installed in any position. However, the preferred orientation is with the stem pointing vertically upwards. Field of application • Industrial plants • Sewage ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C
Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment ...
Maran e Peracini srl
DN: 40 mm - 300 mm
Pressure: 0 bar - 10 bar
Temperature: 120 °C
Cast iron (GJL 250) PN 10 quick closing gate valve flat body bronze trim. Made in Italy. Fields of application: Industrial plants - Sea water - Shipyard - Fuel - Non-aggressive fluids - Tanks.
Maran e Peracini srl
DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
... polished Ra < 0.8, Stainless steel electro polished Ra < 0.4 / Fe < 1% Technical Specifications Market segments •Water •Water Treatment Plants •Power Generation •Chemical Processing •Oil & ...
InterApp AG
DN: 1 in
Pressure: 2.8 bar
Temperature: 29 °C
... Operation After water flow is activated at the shower or eyewash, the outlet water temperature will reach 85°F (29°C) when hot water arrives at the mixing valve. ...
Thermomegatech
DN: 0.5, 0.75 in
Pressure: 20.7 bar
Temperature: 149 °C
... protection valve designed to protect water resupply lines from freezing. This thermostatic valve controls flow based on temperature variations to prevent frozen or bursting pipes which ...
Thermomegatech
DN: 0.5 in
Pressure: 20.7 bar
Temperature: 149 °C
... actuated trap) valve. This thermostatic actuator senses the fluid temperature and will modulate the valve open to initiate flow if the temperature falls below the valve’s set point. Once ...
Thermomegatech
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid ...
Tecnidro
DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h
PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...
Tecnidro
Please specify:
Help us improve:
remaining