Water valves

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

... saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

... Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater ...

DN: 8 mm - 50 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 185 °C

... The pneumatically operated GEMÜ S40 globe valve is designed for use in industrial applications and has body configurations such as angled and straight seat bodies. The valve spindle is sealed by a self-adjusting seal ...

DN: 25 mm - 600 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 150 °C

... The GEMÜ 487 Victoria soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox depending on customer requirements. The butterfly valve is available in nominal sizes DN 25 to 600 and standardized ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

... Diaphragm valve - R690 The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 100 bar
Temperature: -60 °C - 350 °C

... The sliding gate control valve type 8021 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can perfectly be handled. Size: DN ...

DN: 15 mm - 250 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 350 °C

... The sliding gate control valve type 8043 in a reinforced version and long design with piston actuator and integrated positioner is due to its compact design universally applicable for neutral and aggressive media in the chemical industry, ...

DN: 15 mm - 125 mm
Pressure: 10 bar - 40 bar
Temperature: -60 °C - 230 °C

... This compact motor valve is used in a wide range of process engineering control tasks. It is particularly characterised by its very short design. Most media such as steam, fluids, gases, etc. can be excellently controlled with it. This ...

DN: 32 mm - 1,400 mm
Pressure: 10, 16, 25 bar
Temperature: -20 °C - 120 °C

... Butterfly valves from our range Flowrates H2O are versatile and bring a lot of flexibility and securness to operate in various industries. The reinforced seat technologies suit oerfectly to many processes, from cold to hot water, ...

DN: 80 mm - 2,000 mm
Pressure: 10 bar - 250 bar
Temperature: -196 °C - 850 °C

... Technical Advantages of Triple Eccentric Butterfly Valves Better trade-off of mass, face-to-face and nominal diameter than other types of metal/metal valves (ball valves, gate valves, ...

DN: 0 mm - 800 mm
Temperature: -10 °C - 70 °C

... Resilient seated gate valves are gate valves with an elastomer lined wedge. They are especially used for wastewater, drinking water supply and irrigation. We cover an extensive range in stock up to ...

DN: 32, 40, 50 mm
Pressure: 10 bar
Temperature: -10 °C - 100 °C

... HEATING-COOLING / DOMESTIC HOT WATER / UNDERFLOOR HEATING / REGULATION IN GENERAL Mixing thermoregulating actuator with electronics onboard Remote management with Modbus-RTU protocol Temperature control: climatic function ...

DN: 20, 15, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Fast push connection ...

DN: 15, 20, 25 mm
Pressure: 16 bar
Temperature: 5 °C - 160 °C

... ON-OFF functioning, with 1 extra free micro switch on opening 2 points control actuator with relay Operating time: 45 sec for 90° rotation – 8Nm Fast push connection ...

DN: 80 mm - 100 mm
Pressure: 16 bar

... description
Butterfly valve with EPDM O-ring, made from UPVC (U-PVC), available in DN80 and DN100 sizes (PN16).

Product details

• Brand: U-PVC Check Valves
• Category: Check Valves
• Type:

DN: 20, 25 mm
Pressure: 10 bar

... Short description
Single union ball valve for water systems with UPVC body, male threaded ends and quick coupling for PE pipes.

Overview

• UPVC compression valve — single

DN: 15 mm - 100 mm
Pressure: 10 bar - 16 bar

... Overview
UPVC double union ball valve with adjustable seat and female plain ends.

Product Details

• Type: UPVC Ball Valves
• Brand: U-PVC Ball Valves
• Category:

DN: 0.125, 0.375, 0.5 in
Pressure: 7, 5, 10, 20 bar
Temperature: -20 °C - 84 °C

... Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves ...

DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C

... Electronic proportional flow control valves provide precise control of air/ water flow with the latest technology. Electronic proportional flow control valves use the latest technology to provide precise ...

DN: 6, 8 mm
Pressure: 20 psi - 30 psi

... Miniature Pinch Valve is a solenoid operated device that is designed to open and close tubes for controlling flow of liquids and gases. Other valve types have internal passages that may cause small amounts ...

DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

... in contact with the fluid handled only: body and diaphragm ● Body designs: 2-way valve body, T-pattern, tank or multi-port valves ● Butt weld ends or clamped connection ● Drain angle indicated by laser marking ● ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

... Flue gas desulphurisation Shipbuilding Swimming pools Process engineering Heat recovery systems Hot- water heating systems Water treatment Water extraction ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

... Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator ...

DN: 0 mm - 1.5 mm
Pressure: 0 bar - 34.7 bar

... The needle valve is an adjustable orifice, which can be used to control flow rates, mini-cylinders, nozzles, timing circuits, filling heads, bleed vents, and in many other applications. The adjusted flow remains stable even during temperature ...

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

... The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve is moved to ...

DN: 1.78 mm
Pressure: 500 psi

... Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About 9g in stainless ...

Pressure: 0.2 bar - 8 bar
Temperature: 1 °C - 75 °C
Flow rate: 12, 17, 35 l/min

... Product Overview
A urinal flush valve designed for commercial and public restroom systems to control flushing cycles, reduce water consumption and provide reliable performance across variable inlet pressures. ...

DN: 0.5 in - 2 in
Pressure: 1 bar - 10 bar
Temperature: -15 °C - 100 °C

... application. What is the function of Titanium Direct Acting Pressure Reducing Valve? Titanium Pressure Reducing Valve is a control valve that reduces the input pressure of a fluid to a desired value ...

DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C

... Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the system by reduce ...

DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C

... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... DIALOCK® diaphragm valve with stroke limiter and male ends for solvent welding, metric series. The DK DIALOCK® diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The ...

DN: 15 mm - 65 mm
Pressure: 10 bar
Temperature: -20 °C - 120 °C

... Pneumatically actuated diaphragm valve with male ends, metric series. Normally Closed function. The DK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal ...

DN: 125, 150 mm
Pressure: 10 bar

... The FE is a butterfly valve for shutting off or regulating flow, specifically designed for water conveyance applications. In addition to the manually actuated version, FE is also available in FE/ CE electrically actuated ...

DN: 0 mm - 10,000 mm
Pressure: 2,500 bar - 4,200 bar
Temperature: 5 °C - 50 °C

... description
Needle valves provide a reliable means to shut off and regulate media. Designed specifically for extreme high‑pressure applications, these valves are used in demanding hydraulic systems such as hydroforming ...

DN: 0 mm - 10,000 mm
Pressure: 0 bar - 1,379 bar
Temperature: -73 °C - 232 °C

... manually closed or opened in either direction, WEH® needle valves reliably provide this function. The valves run smoothly and are highly durable because the valve needle is decoupled from the rotating ...

DN: 4 mm - 16 mm
Pressure: 0 MPa - 1 MPa
Temperature: -15 °C - 150 °C

... Throttle (needle) Valve made of SUS316, which is highly resistant to corrosion. Best suitable for industries such as chemicals, medical care, semiconductor manufacturing, solar battery and secondary battery etc. All parts are oil-free ...

DN: 10, 12, 8, 4, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 120 °C

... Not only the body but the release ring is made of brass, thus best suitable for high heat and spatter environments. It is compatible with special specifications. HNBR is used for seal material. FKM specification is also available as option. No ...

DN: 12, 10, 4, 8, 6 mm
Pressure: 0 MPa - 1 MPa
Temperature: 0 °C - 80 °C

... PP (Polypropylene) is applied for the body material to adapt to clean environment. Easy to check sanitary condition. Clear (semitransparent) color used for the resin body makes it possible to check visually the fluid (liquid) inside. All parts ...

... The Pressure Reducing Valve is made of solid BSP brass and stands at 1-1/4 inch. This unit is ideal for fitting in a water inlet. ...

Pressure: 0 bar - 2 bar
Flow rate: 0 l/min - 120 l/min

... Common industries that use pinch valves for the benefits of isolating fluid from a mechanical valve include: drug dispensing, laboratory equipment, waste water, medical devices, chemical, food and beverage ...

Pressure: 30 psi
Temperature: 32 °F - 180 °F
Flow rate: 8, 0 l/min

... isolation valve like no other... Utilizing the industry's most robust and powerful miniature linear actuator, the patent pending stepper-controlled Eclipse proportional isolation valve leads the industry in performance ...

Pressure: 2 bar
Temperature: 0 °C - 70 °C
Flow rate: 60 l/min

... NIV series multi-channel gradient valves feature multiple 2-way, normally-closed PTFE media isolation valves connected around a central body. This unique design provides significant reduction in internal volume with enhanced ...

DN: 10, 7, 8, 12 mm
Pressure: 15 bar
Temperature: 0 °C - 90 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials Handle made of PA66 O-ring made of NBR70 Thread Cyl. thread, DIN EN ISO 228 Con. thread, DIN ...

DN: 8 mm - 50 mm
Pressure: 25 bar - 50 bar
Temperature: -20 °C - 150 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Materials series 20, 21, 30, 31, DVGW series 40,41, Ball- valve with air vent Thread Cyl. ...

DN: 10 mm - 45 mm
Pressure: 0 bar - 60 bar
Temperature: -20 °C - 220 °C

... – Various lines for flexible applications – Mini ball valves also with plug connection Operating pressure See table Actuation up to max. 8.4 bar Materials Ball made of brass (Ms58), chrome layer Handle made of aluminium, painted Seal ...

DN: 12 mm

... Modular and versatile pneumatic valve for manifold assembly. Agriculture Specifications Media Liquid, vapor ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... Body Material - SS ASTM A351 Grade CF8 / CF8M / CF3M Seal - PTFE / VITON Circumstance Temp: -10°C to 70°C Actuator Information > - Life: More than ten million cycle > - Other Technical Data: Available Available on request Adjust Stroke Limiter ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

... Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Body Material: - SS ASTM A351 Grade CF8 / CF8M > Seal: - PTFE / PEEK / VITON Actuator Information > - Cover: Nylon Glass-Filled (Corrosion résistive) with SS Liner > ...

DN: 2 in
Pressure: 4.5 bar - 7 bar
Temperature: -10 °C - 180 °C

... > - Port: Refer below technical data sheet (Available BSP / NPT) > - Body Material: SS ASTM A351 Grade CF8 > - Seal: PTFE / VITON > - CircumstanceTemp: -10°C to 70°C > - Leakage: As per ANSI B16.104 - 1976Teflon seating class IV. For other soft seating ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PRESSURE REDUCING VALVE The valve reduces high upstream pressure to a pre-set lower and constant downstream pressure level, regardless of fluctuating flow or varying upstream pressure. A hydraulic regulating pilot ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... ELECTROHYDRAULIC ON/OFF VALVE The valve opens fully or shuts off in response to electric signals. The valve is controlled by a solenoid that allows control liquid to flow in the upper ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

... PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may open gradually ...