Water valves

Pressure: 0 bar - 40 bar
Temperature: -30 °C - 230 °C

... worldwide. Modern precision manufacturing methods and the very best materials guarantee ROCKY valves to be of the highest quality and reliability. TPC valves and accessories were primarily developed for the rationalization ...

DN: 1.25 in - 24 in

... Automatic Control Valves Float Control Valves, On-Off, 1 1/4" to 24" ...

DN: 15 mm - 200 mm
Pressure: 16 bar - 40 bar
Temperature: 0 °C - 400 °C

... Nominal diameter DN 15 .200 Nominal pressure PN 16,25,40 Body made of sph. cast iron EN -GJS-400-18-LT, EN-GP-240-GH Bellows seal (TA-Luft') with safety stuffing box High Kvs-values (favorable Zeta-values) High seat tightness External threaded spindle Handwheel ...

DN: 16 mm - 110 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

... 100% factory tested. • Available in PVC-U or Corzan® CPVC. • Threaded seal carrier. • It allows the disassembling of the valve while maintaining system pressure. • Union ends for easy installation and removal. • Good mechanical strength. • ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -35 °C - 200 °C

... The KTN 266ITT is our butterfly valve with a wafer type connection, seat and ptfe disc . The ptfe seat and disc give the valve great resistance to corrosion . The range is from DN 40 to DN 300 , replacing the sleeve with ...

DN: 8, 12, 10, 6 mm
Pressure: 4, 10 bar

... resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 132 bar
Temperature: -46 °C - 400 °C

... 3 piece metal seated ball valve, for high temperature and clean services, in stainless stell or carbon stell, with lever or actuator, SW, BW, NPT, class 800Lbs ...

DN: 10 in - 16 in
Pressure: 0.1 MPa - 0.8 MPa
Temperature: 1 °C - 42 °C

... electronic sensors to determine piston positions. “Totalizer” function tracks total amount of water treated. Audible Cycle Advance Alarm sounds if the valve is stuck in any position for more than 2 minutes. Self-charging ...

DN: 32 mm - 125 mm
Pressure: 0.7 bar - 16 bar
Temperature: -20 °C - 80 °C

... inside the SAE mounting face the shut-off valve simply remains mounted to the closing end after releasing of the pipe or the flexible pipe connector. The inner calibre of the shut-off valve is increased in size by ...

DN: 25 mm - 150 mm
Pressure: 0 bar - 10 bar

... Inexpensive shut-off fitting in the hygienic product and CIP section Solidly designed valve disk Safe guidance of the disk thanks to bushes in the housing Seal with a small volume and extension gaps for compensating temperature ...

DN: 50 mm - 700 mm
Pressure: 4, 2, 10, 7 bar
Temperature: 70, 120 °C

... industry - other inert fluids Assembly: Assembly from horizontal to vertical position. During assembling the gate valve between flanges remember to get tight the packing gland. ...

DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C

... Vatac 3 Way Plug Valves, this specification covers the design, manufacture and testing of 4 in. (100 mm) through 12 in. (300mm) 3-Way 100% Ported Tapered Plug Valves Tapered Plug Valves suitable for ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 130 °C

... venting valves remove air or gases from systems or pipelines without requiring an external energy input. When a system is drained they act as venting valves. The EB 1.12 bleeding/venting valves are compact ...

... ARAG® Manual Proportional Spray Control Valves Adjusts flow proportionally to control spray pressure. Key Features 473 Series outlet size: 1 1/4" HB ...

DN: 40 mm - 100 mm

... The flywheel valves are made primarily of aluminum alloy in a heat-treated, fire engine red finish. The other major components are made of stainless steel and galvanized brass. Some of the major characteristics of these ball valves ...

DN: 1 in - 10 in

... Desuperheating) are done in a single valve making it an extremely efficient, cost effective and compact solution. Features - Compact Design - High turndown (40:1) - Reduced noise level - Efficient cooling water ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 63 bar
Temperature: -25 °C - 180 °C

... TECHNICAL INFORMATION1. Stainless steel full port ball valve, 2 pieces2. Thread ends according gas EN 10226-1 (EX ISO 7-1 e DIN 2999)3. Made of AISI 316 (CF8M)4. Ball seats PTFE + 15% G.F.5. Blow-out proof stem6. Viton o’ring stem7. Stem ...

DN: 25 mm - 50 mm
Pressure: 16 bar

... Angle valve with threaded terminals for potable water or non-aggressive liquid systems. Flow regulation by rotation of the stem. Also available with counter-clockwise closing system. Vertical installation. - ...

DN: 25 mm - 125 mm

... The GRC Series, manufactured by Gemels, is a 2-way high pressure carbon steel ball valve that is specially designed to produce a shutoff even after abandonment. This valve works within a temperature range of -20°C up ...

DN: 15 mm - 50 mm
Pressure: 16 bar
Temperature: -15 °C - 150 °C

... External thread according to ISO 228/1 Leakage rate: EN 1349 – Seat leakage VI G 1 (tight seal) Body: Bronze Rg-5 CC499K Valve/shaft: Brass CW614N / CrMo steel 1.4122 Cable gland seal: EPDM Servomotors: – MLH55 / MLH100 / MLH160 – ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar

... characteristics are essential for gate valves. We have therefore incorporated our many years of experience into developing our E3 gate valves to give them the finishing "Made for Generations" touch. The result: Hawle ...

DN: 15 mm
Pressure: 0.2 bar - 15 bar
Temperature: 80 °C

... diaphragm sensing and balanced plug pressure reducing valves. These regulators are designed for use with compressed air, water and other gases and liquids compatible with the construction materials and ...

DN: 0.375, 0.5 in
Pressure: 0 bar - 10 bar
Temperature: 0 °C - 100 °C

... mechanical PEKI valve series has been manufactured for decades from high-quality hot pressed parts and precision turned parts, which are assembled with modern injection moulded parts and sealing elements from German production. PEKI valves ...

DN: 40, 32, 25, 20, 15 mm
Pressure: 2 MPa
Temperature: 2 °C - 90 °C

... of hot water, or chilled water through coils and heat exchangers of all types, in a wide range of Heating, Air Conditioning and Ventilation applications. V3 series 3 way motorized ball valve are 3-wire ...