Schubert & Salzer ISO valves

DN: 15 mm - 80 mm
Pressure: 10 bar - 400 bar
Flow rate: 0.1 m³/h - 6.3 m³/h

... limited by the design of the valve. The valve seat and plug are made of ceramic or solid stellite materials, the mechanical performance of which assures high durability of the product. We can adjust ...

DN: 25 mm - 300 mm
Pressure: 63, 25, 40, 10, 16 bar
Temperature: -40 °C - 300 °C

Control valves type Z33 (previous name: BR33) are manufactured in configuration with membrane and spring rotary pneumatic actuators type R/R-99. The purpose of this proposal is to extend the offer of Z33 type valve ...

DN: 20 mm - 300 mm
Pressure: 16 bar - 160 bar
Temperature: -180 °C - 650 °C

Valves type Z10 (previous name: 10000 DG) with a pressure-balanced plug are used as final executive elements in automatic and remote control systems. They are used to regulate the flow rate of liquids and gases in the ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 132 bar
Temperature: -46 °C - 400 °C

3 piece metal seated ball valve, for high temperature and clean services, in stainless stell or carbon stell, with lever or actuator, SW, BW, NPT, class 800Lbs

DN: 0.5 in - 6 in
Temperature: -50 °C - 400 °C

... Bi-directionality make this model of tecnica high level. Available with heating jacket also (in this case called WSJ) All valves are provided with ISO 5211 top drilling. Face to face are according to ...

DN: 1 in - 4 in
Pressure: 10 bar - 250 bar
Temperature: -46 °C - 400 °C

... APT2 has the capacity to figure out the problem of high temperature fluid handling typical of all PENTA metal seated ball valves. This product also has the quality of mass made by the standard ALFA Valvole models. The ...

Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet G1/4" female, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: DIN 12918-1 Inlet / Outlet: ...

Pressure: 0.2 bar

... control valve, inlet and outlet G1/4" female, for burning gas "Push-turn" ceramic headwork TECHNICAL FEATURES Media: Burning Gas Maximum pressure: 0.2 bar Fluid identification: EN 13792 Design: DIN 12918-2 Inlet ...

Pressure: 10 bar

Front control valve, inlet and outlet G1/4" female, for compressed air Needle headwork with fine regulation TECHNICAL FEATURES Media: Compressed Air Maximum pressure: 10 bar Fluid identification: EN 13792 Design: ...

DN: 25 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... EPDM-seat gasket cone rotatable, protected against water hammer flange connection without drain port (drain valve cannot be added) spindle thread not in contact with medium with a black handwheel ...

DN: 15 mm - 80 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... sensor or thermometer can be added using immersion sleeve spindle thread not in contact with medium wear-resistant valve seat made of stainless steel up to DN 50 with a black handwheel free from dead ...

DN: 50, 15, 40, 25 mm
Pressure: 16 bar
Temperature: 0 °C - 110 °C

... to accepted materials list from German environmental agency up to DN 32 soundproofing certification according to DIN EN ISO 3822 Class 1 DIN EN 1213 ÜA-Reg.-Nr. R-15.2.3-21-17048, WIEN-ZERT

DN: 0.5 in - 3 in
Pressure: 40, 16, 25 bar
Temperature: -20 °C - 160 °C

Full bore · ISO-5211 mounting pad for actuators Characteristics •General industry application. •Blow-out proof stem design. •Triple system of sealing in the stem: 2 virgin PTFE joints and Fluoroelastomer O-Ring. •ISO-5211 ...

DN: 0.25 in - 2 in
Pressure: 10, 30, 16 bar
Temperature: -20 °C - 160 °C

... applications. •Blow-out proof stem design. •Double system of sealing in the stem, for PTFE joints and FKM (VITON) O-Ring. •ISO-5211 mounting pad to mount directly actuators Specifications •'Ends: BSPP threaded ...

DN: 0.25 in - 4 in
Pressure: 25 bar
Temperature: 120 °C

2 pieces ball valve Nickel-plated brass Full bore · BSPP · NPT

DN: 40 mm
Pressure: 50 bar - 63 bar
Temperature: -50 °C - 185 °C

... Thread BSPP ISO 228-1 - Material Ball: - Stainless steel CF3M Ra 0.4 Pressure: - 63bar up to DN40 50bar over - Material seat: - TFM1600 Temperature: - -50°C / 185°C - Operation: - Lever ATEX Group II Category 2 G/2Dc ...

DN: 0.5 in - 1 in
Pressure: 6 bar
Temperature: 180 °C

Model: - Straight adjustable - Material body: - Stainless steel 1.4408 / CF8M Connection: - Thread BSPP ISO 228 - Material seats: - FKM / PTFE Including: - Pressure gauge Note: - Clean steam Pressure incomming steam ...

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

304 SS Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...

DN: 25 mm - 300 mm
Pressure: 16, 10 bar
Temperature: -10 °C - 120 °C

Presentation Dampers Butterfly Valves Presenting Double Flange Damper Butterfly Valve Practical examples: • Process-gas cleaning in a foundry • Waste air purification in chemical / pharmaceutical ...

DN: 25 mm - 300 mm
Pressure: 2 bar - 8 bar
Temperature: -50 °C - 120 °C

... Butterfly Valve Air Operated For Marine Industry Structure - rack and pinion rotary actuator Surface Treatment - hard anodizing Low Temperature: -40ºC(-104°F) ~ 80ºC (+176°F). Connection - NAMUR, ISO5211, ...

DN: 0.5 in - 40 in

... Temperature Trunnion Ball Valve Fabricator: Metal-Seated Trunnion Mounted Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. High Temperature Trunnion Ball Valve Cast ...

DN: 0.5 in - 40 in

Cryogenic Cast Steel Ball Valve Supplier: Cast Carbon, Stainless Steel Ball Valves, 1/2-40 Inch, 150-2500 LB, API 6D, BS 5351, ASME B16.34, DIN 3202. Cryogenic ball valves are available ...

DN: 1.5 in - 48 in

Stainless Steel Gate Valve Supplier: SS Gate Valves, 1-1/2-48 Inch, CL150-CL2500, API 600, ASME B16.34, ASTM A351 CF8, ASTM A351 CF8M, ASTM A351 CF3, ASTM A351 CF3M. Med Stainless Steel Gate Valves ...

... electrohydraulic system, it meets the DIN EN ISO 4126-5 safety standards for protection against line overpressure, as per TRD 421 TUV-approved system. This design allows for omission of the boiler safety valve ...

DN: 8 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: 0 °C - 150 °C

... diaphragm sensing, pressure reducing valves are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon and other gases or liquids compatible with the construction materials and valve ...

DN: 15 mm - 50 mm
Pressure: 0.3 bar - 5 bar
Temperature: 0 °C - 180 °C

... sensing pressure sustaining valves. These regulators, available with spring or dome-loading, are designed for use with clean steam, compressed air, water and other gases or liquids compatible with the construction materials ...

DN: 25 mm
Pressure: 0 bar - 12 bar
Temperature: 0 °C - 130 °C

Tank blanketing valves are commonly used in tank storage systems to prevent and protect against explosions (avoiding flammable liquids being vented from a vessel), to control product contamination against external air ...

DN: 25 mm - 600 mm
Temperature: -46 °C - 250 °C

... Standard Based on API 6D, API 600, ASME B16.34, ISO 14313, ISO 10423, ISO 17292 End Connections RF, RTJ as per B16.5 &B16.47 BW, Butt Welded as per B16.25 Features of ...

DN: 2 in - 48 in
Pressure: 25 bar
Temperature: -29 °C - 650 °C

... indicate the standard diameter, pressure and valve connection required for the valve. If not specified, the size is given in the specification; 2. If there are special requirements for the required ...

DN: 2 in - 48 in
Pressure: 10 bar - 420 bar
Temperature: -196 °C - 600 °C

... the two sealing faces on the valve body when wedged. 3. Wedge gate valve, American standard wedge gate valve can be divided into open rod gate valve (lifting rod gate ...

DN: 4 mm - 32 mm
Temperature: -50 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 2 mm - 16 mm
Temperature: -35 °C - 200 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 2 mm - 48 mm
Temperature: -23 °C - 125 °C

Pneumatic control valve VALVE STYLE Butterfly valve USAGE Throttling service Low-pressure service On/off service Hygienic service VERSION ANSI SUPPLY Pneumatic VALVE ...

DN: 15 mm - 250 mm

• ISO 5211 ACTUATOR MOUNTING • Blow-out-proof stem design Antistatic • Body: WCB/CF8/CF8M • Ball:SS316 • Stem:SS316 • Seat: PTFE/PPL • Connection: Flanged • Options: Certified 10 API 607 4th Edition Installable ...

DN: 50 mm - 500 mm
Pressure: 10 bar - 160 bar

... T9113、ASME B16.5、EN1092-1 • ISO 5211 ACTUATOR MOUNTING • Blow-out-proof stem design, Antistatic • Body: WCB/CF8/CF8M • Ball:SS304/SS316 • Stem:20Cr13/17-4PH/SS304/SS316 Installable Accessories Solenoid ...

DN: 50 mm - 2,000 mm
Pressure: 16 bar
Temperature: -40 °C - 205 °C

• Valve plate material: Ductile iron nylon coated, Ductile iron-zinc plated, AI bronze • Construction ISO5752 AP1609 GB12221 • Design standard:GB12238 • Inspection standard: ISO ...

DN: 2, 2.5 in
Pressure: 1 bar
Temperature: 60 °C

Pressure-vacuum valve is a valve designed to maintain atmospheric pressure inside the tank while it is being filled or emptied. Pressure-vacuum valve is widely used in the food-processing, ...

... water valves, micro-valves, magnetic valves, mechanical valves, pneumatic valves. Check valves are available with various connections ...

DN: 4 mm - 25 mm
Pressure: 250 bar - 300 bar
Temperature: -20 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 4 mm - 35 mm
Pressure: 250, 500, 350, 400 bar
Temperature: -30 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 50, 32, 40 mm
Pressure: 420 bar
Temperature: -20 °C - 100 °C

Mounting holes Position switches Combinations Detent on request

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

... sealing ISO 5211 top works for automation Anti blowout stem Self relieving seats Optional Features: V-Port for flow control applications NACE MR0175 / ISO 15156 compliance Construction standards: ASME ...

DN: 8 mm - 20 mm
Pressure: 160, 100 bar
Temperature: -50 °C - 225 °C

... plant ball valve with female threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to DIN 3202 part 4-M3 thread connection ...

DN: 8 mm - 20 mm
Pressure: 100, 160 bar
Temperature: -50 °C - 225 °C

... plant ball valve with male threaded ends. Features DN 8 - DN 20 one-piece ball valve soft seated floating ball FTF dimensions acc. to producers standard thread connection ...

DN: 15 mm - 200 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 225 °C

INTEC K200 Flanged ball valve, floating ball, soft seated. Features nominal sizes DN 15 - DN 200 nominal sizes NPS 1/2" - NPS 8" two-piece split body soft seated floating ball FTF dimensions ...

DN: 15 mm - 20 mm
Pressure: 0 bar - 16 bar
Temperature: -10 °C - 120 °C

In media-separated piston valves, a pivoted lever in conjunction with the membrane fitted on it ensures low-friction power transmission with high tightness. Due to the “lever arm effect”, only a small dimensioned pneumohydraulic ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C

Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...

DN: 15, 20 mm
Pressure: 16 bar
Temperature: 120 °C

Brass ball valve Novo • - Brass ball valve, screwed ends • - Used for water, steam, gas, petroleum • - Blue color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max ...

DN: 8 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C

Brass ball valve Novo • - Brass ball valve, full bore, screwed ends • - Used for water, steam, gas, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • ...