Spirax Sarco shut-off valves

Pressure: 75, 500, 420 bar
Temperature: -40 °C - 80 °C
Flow rate: 30 l/min

... check valve. If the pressure on the consumer side drops below the pressure setting, the idle circulation is interrupted and the oil fed to the consumer again. Shut-off valves or accumulator ...

Pressure: 350 bar
Temperature: -40 °C - 80 °C
Flow rate: 8, 25, 12 l/min

The shut-off valve type LV operates using automatically controlled (pulse independent) step switching in the pilot valve. Features and benefits: Various means of adjustment Various ...

Pressure: 350 bar
Flow rate: 50, 80, 120 l/min

The shut-off valve type ALZ operates using automatically controlled (pulse independent) step switching in the pilot valve. Features and benefits: Various means of adjustment Various ...

DN: 0.281, 0.187, 0.798, 0.483, 1 in
Pressure: 5,000 psi

... individually designed to meet custom requirements. The valve design functions as a normally-open check valve. As the flow rate increases beyond a specified value across the valve, a poppet ...

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with ...

DN: 6 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off ...

DN: 6 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

SISTO-C ● Soft-seated shut-off valve ● Unique design with enclosed diaphragm ● Diaphragm with spiral support starting with size MD65 ● With manual or pneumatic actuator ● Shut-off ...

Pressure: 0.5 bar - 250 bar
Temperature: -20 °C - 200 °C

WEH® Screw-in Valve TVR400, stainless steel - Series The screw-in valves of the WEH® TVR400 series are mechanical shut-off valves which allow the media to flow in the ...

Temperature: -20 °C - 40 °C

Vacuum Valves, 3 Channels, AG Series . Connection on the vacuum network . Electric control . Voltage: 12 VDC / 24 VDC ou 24 VAC / 110 VAC / 220 VAC . NO or NC for the vacuum or compressed air supplied servo Characteristics . ...

DN: 0.375 in - 24 in
Pressure: 2,500 psi
Temperature: 360 °C

The Copes-Vulcan Model F100-40 Sampling Valve was developed to provide positive shutoff and reliable operation for both sampling and containment isolation applications in nuclear power plants. Such ...

DN: 2 in - 36 in

M&J Valve Expanding Gate (EG) valves can be used in wide range of critical applications, from pipelines to power plants, in ESD and other demanding isolation applications. Description The M&J Valve ...

DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C

• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive

DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C

- Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill - Double acting pneumatic drive - Readily mounted 5/2 way solenoid valve Diameters ...

DN: 80 mm - 400 mm
Pressure: 6 bar - 8 bar
Temperature: 0 °C - 120 °C

• Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill • Double acting pneumatic drive

DN: 1 mm - 1.1 mm
Pressure: 0 bar - 13.8 bar

The MSV series slide sleeve valve provides an efficient in-line three-way valve. When the sleeve is moved to the “ON” position, fluid is allowed to pass through the valve. When the sleeve ...

DN: 1.78 mm
Pressure: 500 psi

Beswick’s miniature ball valve is an excellent choice for applications requiring a compact on/off valve. This design offers small size, light weight, and non-restricted flow. Approximate Weight: About ...

DN: 1.78 mm
Pressure: 500 psi

... selector ball valve this is manufactured using stainless steel materials. It is an excellent choice for application requiring a port selection valve. The MBVT-1414 allows bi-directional flow between ...

DN: 0.11 in - 0.56 in
Pressure: 1,550 bar
Temperature: -50 °C - 230 °C

... thus a high reliability of the valve. MAXIMATOR valves of the 21V series have a cold-machined stainless steel body. Valve bodies are available in six different designs and can be equipped ...

DN: 8 mm - 100 mm
Pressure: 63 bar
Temperature: -29 °C - 175 °C

3 PIECES ATEX BALL VALVE WITH ISO MOUNTING PAD - FEMALE / FEMALE BSP - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 175 °C

WAFER ATEX BALL VALVE WITH ISO MOUNTING PAD - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 175 °C

3 PIECES FULL BORE FLANGED END BALL VALVE - STAINLESS STEEL 316

Pressure: 3 bar - 5 bar
Temperature: -20 °C - 100 °C

These valves are similar to "SHUT OFF" valves for SMX metering element. The difference is that are not connected to metering elements but mounted directly on the feed to create different ...

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

... (air) or 3.5 LPM (water) Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...

DN: 3.175 mm
Pressure: 0 bar - 5.2 bar
Temperature: 0 °F - 150 °F

... the device. The PTFE needle valves are suitable for laboratory and industrial applications. It regulates corrosive gases and liquids for high pressure applications. These valves may also be utilized ...

... non-critical vacuum service, under pressure or as shut off valves. Quick compression adjustment is offered for unique radially compressed PTFE o-ring feature without disassembly. PTFE and PCTFE materials ...

DN: 6 mm - 80 mm
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 180 °C

... GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance ...

DN: 15 mm - 100 mm
Pressure: 0 bar - 40 bar
Temperature: -10 °C - 60 °C

... 539 2/2-way globe valve has a hollow shaft actuator and is electrically operated. The eSyDrive hollow shaft actuator can be operated as an OPEN/CLOSE actuator or as an actuator with integrated positioner or process controller. ...

DN: 4 mm - 25 mm
Pressure: 0 bar - 5 bar
Temperature: -10 °C - 100 °C

The GEMÜ 660 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve was designed for dosing and filling a wide range of products. All metallic actuator ...

DN: 1.5 in - 6 in
Pressure: 5 bar
Temperature: 135, 140 °C

The next generation of mixproof valve technology is the result of continued development from both APV and Waukesha Cherry-Burrell process technologies. Used for the reliable separation of dissimilar fluids, the D4 Series ...

DN: 38 mm - 152 mm
Pressure: 7, 10.3, 10 bar

Mixproof valves provide safe separation of dissimilar products within the same valve body. Specifications For general purpose mixproof applications, we offer the W71 Series for standard shutoff ...

DN: 25 mm - 152 mm
Pressure: 5 bar - 84 bar
Temperature: 21 °C - 138 °C

W60 series single seat valves are used to shut-off or divert flow in a process system. These valves are pneumatically or manually operated, and offered in a wide variety of configurations. ...

DN: 12, 6 mm
Pressure: 0 bar - 500 bar
Temperature: -20 °C - 60 °C

C2.940 High-pressure shut-off valves C2.940 High-pressure shut-off valves max. operating pressure 500 bar nominal diameter: ND 6 and 12 temperature range: 40º ... ...

DN: 0.125 in - 1 in
Pressure: 0 bar - 15 bar
Temperature: -10 °C - 50 °C

Wall clamping screws FRL1 M4x14 FRL2 M5x18 FRL3 M6x20 Fluid Compressed air. Assembling position Vertical

Pressure: 400 bar

Cylinder body made of steel, phosphatized. Remaining parts made of tempering steel. Valve seat and piston are hardened and ground. This valve is leak free. The stop valve ...

DN: 6 mm

The hand valve provides bubble tight shut-off time after use. The valve is directly attached into the plate with O-ring seal.

DN: 15 mm - 50 mm
Pressure: 10 bar
Temperature: 5 °C - 80 °C

Torque limiter Limit Stop prevents the valve against sticking, when it is open for a longer period Silicone-free Zero dead leg valve Suitable for slurries and abrasive ...

DN: 15 mm - 50 mm
Pressure: 10, 12.5 bar
Temperature: -20 °C - 120 °C

Torque limiter Limit Stop prevents the valve against sticking, when it is open for a longer period Silicone-free Zero dead leg valve Suitable for slurries and ...

Pressure: 0 bar - 36 bar
Temperature: -40 °C - 125 °C

For air purging in system like DPF system, SCR system and also can be used as ON/OFF valve for controlling gaseous media.

Pressure: 0 bar - 10 bar
Temperature: -40 °C - 125 °C

Used in speed governing systems for cutting down flow of fuel when the speed limit is reached.

Pressure: 0 bar - 12 bar
Temperature: -40 °C - 125 °C

These valves are available in various sizes and orifices. The application is to cut off the fuel flow to fuel pump and thereby stopping the engine.

DN: 50 mm - 150 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The REDEX® slide valve is suitable for the ...

DN: 50 mm - 500 mm

Whether it is silos, mills or extraction systems, our slide valves enable a safe isolation, and are also available for demanding CIP, dust or gas applications. The RSV slide valve is suitable for the ...