Flow: 20 l/min
Pressure: 10 mbar
Power: 120 W
Clean, 100% oil-free operation Corrosion-resistant PTFE/FFPM flowpath Ideal for extremely aggressive/corrosive gases and vapors Compact, quiet and reliable Chemically resistant, oil-free diaphragm vacuum ...
KNF NEUBERGER
Flow: 0.00001 l/min - 0.861 l/min
This peristaltic pump is ideal for the simple conveying of all media. The pump drive of this model makes it possible to switch between a single channel and multi-channel pump head. By ...
Heidolph Instruments GmbH & Co. KG
Flow: 0.004 l/min - 0.00415 l/min
This pump of the Hei-Flow Core series is particularly suitable when high volumes need to be transported easily. A flow rate of 4.0 - 4,151 ml / min can be set for this purpose. This model is designed for the use of single-channel ...
Heidolph Instruments GmbH & Co. KG
Flow: 0.00001 l/min - 0.00081 l/min
The pump drive of the model 120 of the Hei-FLOW Expert series can be operated with either single-channel or multi-channel pump heads. The flow rates with single-channel pump heads are ...
Heidolph Instruments GmbH & Co. KG
Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m
... swapping and upgrading of your old pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable life ATEX certified versions available Can be configured to connect ...
SAMOA Industrial, S.A.
Flow: 210 l/min
Pressure: 1.5 bar - 8 bar
Head: 5 m - 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller ...
SAMOA Industrial, S.A.
Flow: 200 l/min
Pressure: 1 bar - 8 bar
Head: 8 m
... clamped pumps. • Optimized design for maximum performance. • Premium materials for a long and reliable service life. ATEX certified Can be configured to connect a Smart Pump-Controller ...
SAMOA Industrial, S.A.
AugMentor® Pump Stuffer Ensures Reliable, Positive Feeding of High-Viscosity Materials The AugMentor® Pump Stuffer handles high-viscosity materials otherwise unpumpable by conventional ...
Flow: 52, 130, 375, 715 l/min
Pressure: 8 bar
Fluid temperature: -40 °C - 70 °C
ASTRAsolid (DDS) pumps share the same constructive and performing advantages as ASTRAevo pumps: a fast pneumatic exchanger increased unloading systems for performance optimization (without interfering ...
Argal Pumps
Flow: 450 l/min
Pressure: 8 bar
Head: 70 m
The original air-operated double diaphragm QUANTUM pumps are special for their optimized performance and unique advantages that traditional AODD pumps do not have. Solid-block construction made of pure ...
Argal Pumps
Flow: 1,100, 1,280 l/min
Pressure: 8 bar
Head: 4.5, 6 m
The entire construction of the pump (body and air distributor) is made of AISI 316l making the MISTRAL series extremely resistant to corrosion, guaranteeing at the same time a robust and solid solution ...
Argal Pumps
Flow: 250 us gal/min - 5,000 us gal/min
Pressure: 40 psi - 519 psi
... multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Available with diesel or electric drive. Overview Ruhrpumpen's vertical turbine ...
Flow: 2,200 m³/h
Pressure: 40 bar
Head: 330 m
... the SCE-M is a sealless centrifugal pump, 100% leakage free, avoiding high maintenance costs and usage of mechanical seals. It is the best option for heavy chemical handling applications, in completion to API 610 pumps ...
... the maximum debris diameter of 10 mm. They provide a constant operation. NovaPond pumps can be mounted either horizontally or vertically. Also, they are made out of corrosion and oxidation resistant materials, ...
Flow: 0 l/min - 0.288 l/min
Pressure: 0 bar - 40 bar
Power: 44 W
Fluid-dependent customizable dosing pump The micro annular gear pump mzr-7245 of the modular pump series is suitable for dosing and metering in low to medium pressure ...
Flow: 5.3 m³/h - 2,900 m³/h
Head: 7.5 m - 105 m
TZJ Slurry pumps, a new generation of “high efficiency, wear and corrosion resistance, no leakage” products especially for mineral processing application, are developed by the joint cooperation from Tsinghua ...
Flow: 90 m³/h - 8,000 m³/h
Head: 10 m - 50 m
Power: 2.5 ch - 13 ch
... building material and other industries. They can be used as Circulating Pump of FGD Absorbing Tower, Limestone Slurry Pump, Gypsum Slurry Pump, Waste Water Pump and Leakaged ...
Flow: 1,500 m³/h
Head: 35 m
Power: 250 kW
... can be added to the main pump body to help break and mix sludge, and improve the suction concentration of the slurry pump. 4. The submersible dredging pump is easy to install and operate ...
Flow: 0 m³/h - 14 m³/h
Head: 0 m - 11 m
Power: 0.25 kW - 0.55 kW
... Submersible pumps for drainage, infiltration water and emptying of pools, ponds, tanks and reservoirs. The DOC pump is mainly made of stainless steel and the motor has thermal overload protection which ...
Flow: 36 m³/h
Pressure: 5 bar
Head: 25 m
Close-coupled Centrifugal Pump for sea water and hot spring Key Features Features: 1. Pump casing and impeller are made of highly reinforced plastic. The shaft is using SUS316 material. It is anti-corrosive, ...
Flow: 0 l/min - 1,450 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... . Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for better corrosion-resistant ...
Flow: 0 m³/h - 87 m³/h
Pressure: 0 bar - 10 bar
Head: 0 m - 31 m
... . Free install bottom valve. After initial priming water inside pump , the pump will auto-exhaust the air. 5. FKS Pump body/impeller/shaft are stainless steel material for better corrosion-resistant ...
Flow: 35 l/h
Pressure: 903 bar
... This makes it an ideal niche pump for extreme applications. Made of 316 SS, the “V” Series pumps are robust and capable of meeting the toughest challenges. Features Pneumatic operation ...
Flow: 2.8 l/h - 170.3 l/h
Pressure: 5.17 bar - 6.54 bar
Weight: 2.7 kg - 5.2 kg
Low Pressure Diaphragm Pumps The CLD Pneumatic diaphragm metering pump consists of a liquid chamber and an air chamber separated by a diaphragm The CLD is a pneumatic driven low-pressure diaphragm ...
Flow: 22 l/h
Pressure: 15 bar
... range of applications, thanks to several functions included in the same pump, even with few models. Common features for every model: • Foot mounted dosing pump • Corrosion-proof ...
Flow: 0 us gal/min - 140 us gal/min
Head: 0'00" ft - 128'00"
Power: 0.33 ch - 1.25 ch
... Bell & Gossett effluent pump is built to last. The pump features a sturdy cast iron construction for long life and minimal maintenance and a non-clog impeller. Product Features Impeller: Cast iron, ...
Flow: 3,000 l/h
Pressure: 1.8 bar - 2 bar
Power: 0.55 kW
... bar): ca. 1,8-2 N.B. The filter pumps of the series CESE marked with the letter “M” are equipped with a magnetic entrainment pump, which is designed without mechanical seal. This constructional feature ...
Flow: 1.6 l/min - 25 l/min
Pressure: 0 bar - 10 bar
Head: 0 m - 100 m
The gear pumps of the PM series have a wide range of models that allow the transfer of flow rates ranging from 25 l / min to 280 l / min. This type of pumps are suitable for use in the most diverse sectors ...
Anglada Pumps
Flow: 0.45 l/min - 8 l/min
Pressure: 0 Pa - 1,000,000 Pa
Head: 0 m - 100 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 2.33 l/min - 35 l/min
Pressure: 0 Pa - 1,000,000 Pa
Head: 0 m - 10 m
The gear pumps of the AM series have a wide range of models that allow the transfer of flow rates ranging from 3 l / min to 100 l / min. These pumps are suitable for working in a wide range of applications ...
Anglada Pumps
Flow: 0 m³/h - 12 m³/h
Length: 215 mm
Width: 185.75 mm
... AODD pump, along with the ½" bolted plastic pump, features: A corrosion-resistant air section On/off reliability Durable and long-lasting construction Extended-life ...
Flow: 0 us gal/min - 12 us gal/min
Weight: 3.9 kg
... double-diaphragm (AODD) pump for reliable use in lubrication, tire filling, adhesive dispensing, OEM systems and many more industrial applications. Featuring a patented non-stalling, lubrication-free air valve design, ...
Flow: 0 l/min - 4,656 l/min
Pressure: 0 Pa - 2,000,000 Pa
... function as a process and/or CIP pump, which helps in reducing maintenance time and costs, with the advantage that it is suitable for abrasive products like toothpaste. It can handle air up to 60%, which prevents pump ...
Flow: 1 m³/h - 25 m³/h
Head: 9 m - 120 m
Power: 0.75 kW - 7.5 kW
... coupled pumps with suction and delivery connections of the same diameter and arranged along the same axis (in-line). All parts that come into contact with the liquid, including wet-end covers, are in chrome-nickel stainless ...
Flow: 3 m³/h - 18 m³/h
Head: 4.7 m - 16.5 m
Power: 0.45 kW - 1.1 kW
... data Construction Self-draining, single-impeller pumps, with motor insulated from pumped water, constructed with high quality, corrosion-proof plastic materials, with stainless steel diffuser. Compact ...
Flow: 0.53 l/s
Power: 90 W
FEATURES No lock needed No leak risk Compact and high resistant design Running for long periods without need of spare parts Easy maintenance Do not allow to run dry! APPLICATIONS Allows transfer of the majority of chemical ...
Flow: 9 us gal/min
Head: 14'00"
Fluid temperature: 104 °C
Centrifugal Pumps are designed to transfer both corrosive and non-corrosive fluids at maximum hydraulic efficiencies. Centrifugal Pumps are not self-priming and must be used in applications where flooded ...
Gorman-Rupp Industries
Flow: 7.5 l/min
Pressure: 580 bar
Weight: 55 kg
... mainstay pump in the industry for decades, the reputation of Fire-Ball is unrivalled. Built to withstand the test of time with fewer moving parts, our flagship pump is built to extend uptime so customers ...
GRACO
Flow: 40 m³/s
Our concrete volute cooling pumps feature a simple configuration with minimal components and enhanced corrosion-resistant features. Our expertise Suited for plants worldwide GE’s circulating water ...
Flow: 0.2 m³/h - 190 m³/h
Pressure: 0 bar - 40 bar
Head: 4 m - 415 m
... Benefits Reliable: product-lubricated plain bearings made of tungsten carbide, cast pump foot, torsion-resistant pump shroud and confined O-rings Long service life: corrosion-resistant ...
KSB
Please specify:
Help us improve:
remaining