|
|
|
|
|
|
|
Ethernet Direct Panda Series PROFIBUS DP products are in production technology as well as in the connection of distributed intelligence such as the networking of multiple controllers to one another. The data rates are up to 12Mbit/s on twisted pair cables and fiber optics are also possible. Panda Series PROFIBUS converter and gateways are designed for a wide range of applications, particularly in the fields of factory and process automation. It is suitable for both fast, time-critical applications and complex communication tasks with safety and stability when use in industrial applications. The Panda converters are designed specifically for the slave device of PROFIBUS DP protocol. It offers RS-232, RS-422 and RS-485 three kinds of communication way. With the Hybrid COM 1 design, users can readily choose one type of comport to use. By using this module, suers can put their RS-232/422/485 devices into PROFIBUS network very easily. The Panda Series gateways are also designed for the salve device of PROFIBUS DP protocol. It allows the PROFIBUS master to access the Modbus devices. These Modbus devices may be a PLC, a sensor, modules and other equipments. In addtion, Ethernet Direct also provides the utility software for users to configure the Panda gateways. By using this module, users can put their Modbus devices into PROFIBUS network very easily.
|
|
|
|
|
|
ACKSYS renews its serial to wireless solution offer by introducing the WLg-DONGLE, a compact wireless RS232 serial to WiFi Ethernet server with support for 2.4 GHz and 5 GHz radio bands.
WLg-DONGLE relies on the same technology used in the "WLg-xxx" series and thus profit from proven technology, device is very compact and is specially designed to satisfy the needs of the system integrator market.
Product rely on the IEEE 802.11 a/b/g/h standards (2.4 GHz & 5 GHz), it features an full high speed serial port (250 Kbps).
The radio link is made safe by using most modern methods of protection: WEP 64/128 bits, WPA-PSK, WPA2-PSK and authentification IEEE 802.1x (RADIUS).
The nominal range (open space) of the module is 300 m for a transmit power of +20 dBm and -92 dBm in reception (a/g modes) and -95 dBm (IEEE 802.11b mode).
This module supports the following modes : TCP Client / Server, TELNET RFC2217, COM port redirection, TELNET server, raw, point to point (virtual cable) and the serial MODBUS to MODBUS/TCP gateway.
Easy configuration and administration with your web browser, TELNET, SNMP and from the ACKSYS administration software NDM.
|
|
|
|
|
|
SNL2-E Ethernet/RS232/RS485 Gateway
SNL2-E – the optimal solution for connection of serial interfaces and Ethernet networks of up to 100 Mbit/s.
SNL2-E allows the connection of two serial end devices. The serial interfaces can be configured via software as RS232- or RS422/RS485 interfaces. Also, a mixed operation mode is possible.
In addition, for operating the RS485 bus, terminating resistors can be switched on via software. Operation in TTY mode can be realized by means of an external adapter.
Both interfaces support full duplex DMA mode operation. In synchronous operation mode, rates of up to 1 Mbit/s can be reached.
The protocol firmware is loadable. The serial interfaces can be run completely independent from each other. On every serial interface a different protocol driver can be loaded and run.
DF-compatible driver interface
For Windows, as well as UNIX operating systems the DF-board compatible interface allows the replacement of an existing DF-board by an SNL2-E module without any changes in the application software.
|
|
Industrial Ethernet
In this area all Ethernet Gateways, Protocol converters and All-In-One bus nodes are filtered out and displayed. We are already offering solutions for 4 of the more then 20 Industrial Ethernet-versions. Others will be added.
Additionally you will find the Routers in this area, such as the Powerlink-Router. With these devices you connect Industrial Ethernet networks with the "standard" Ethernet.
|
|
|
|
|
|
Anybus Communicator® is a family of certified and proven gateways, connecting automation devices via their serial interface to all major fieldbusses. The Communicator enables industrial devices without a network interface to connect to all major standard fieldbusses including Profibus, DeviceNet, CANopen, ControlNet, CC-Link, Modbus-RTU, Modbus-Plus, Interbus and FIPIO.
The Communicator performs an intelligent conversion between the serial protocol of the automation device and the chosen fieldbus network.
The Anybus Communicator supports RS-232, RS-422 and RS-485 serial electrical signals without any change in hardware. This allows for connectivity to a broad range of serial devices. Typical serial applications include variable frequency drives, sensors, actuators, human machine interfaces, barcode readers, RFID readers and industrial scales among others. It is much more than just a standard tunneling gateway and provides full flexibility and extended connectivity options.
The Anybus Communicator is configured using a very simple Windows%u2122 based software package that requires that the user simply fill in the blanks to match the protocol of the serial device it is connected to. Applications that require conversions from serial Modbus to fieldbus protocols are even easier as a built-in software wizard guides the user through each step of the configuration process.
|
|
|
|
|
|
Anybus Communicator® is a family of certified and proven gateways, connecting automation devices via their serial interface to all major real-time industrial Ethernet networks. The Communicator enables industrial devices without a network interface to connect to all major real-time Ethernet standards including EtherNet/IP, Profinet, Modbus-TCP and EtherCAT.
The Communicator performs an intelligent conversion between the serial protocol of the automation device and real-time industrial Ethernet network.
The Anybus Communicator supports RS-232, RS-422 and RS-485 serial electrical signals without any change in hardware. This allows for connectivity to a broad range of serial devices. Typical serial applications include variable frequency drives, sensors, actuators, human machine interfaces, barcode readers, RFID readers and industrial scales among others. It is much more than just a standard tunneling gateway and provides full flexibility and extended connectivity options.
The Anybus Communicator is configured using a very simple Windows™ based software package that requires that the user simply fill in the blanks to match the protocol of the serial device it is connected to. Applications that require conversions from serial Modbus to real-time Ethernet protocols are even easier as a built-in software wizard guides the user through each step of the configuration process.
|
|
|
INAT echolink is a Serial Ethernet converter. With echolink, devices without network adapter are able to communicate via network. Echolink supports a wide range of serial protocols. Therefore echolink is much more than a simple data converter. It supports complex applications such as PLC programming or process data visualisation.
|
|
|
|
|
|
Fiber Optic Converters
Extend Communications Up to 9 Miles!
Any two pieces of asynchronous serial equipment can communicate at half or full duplex over two fibers at rates up to 460 kbps for RS-422/485 or 115.2 kbps for RS-232 with a pair of these converters. Fiber lines are inherently resistant to EMI/RFI and transient surges, so they are ideal for data communications near heavy electrical equipment and other electrical or radio interference.
Standards can be mixed and matched so RS-232 devices can be connected to RS-422/485 devices, replacing a converter and isolator. When working with RS-485 signals, B&B Electronics’ Automatic Send Data control eliminates the need for driver software. Serial connections are on terminal blocks; multimode fiber side has two ST connectors. Requires external power supply not included.
General Features
FOSTCDRi-SC extends communication up to 9 miles
Wide temperature ranges (-40 to 80º C)
Extend signal up to 2.5 miles
Modbus ASCII or RTU compatible
Automatic Send Data control
EMI/RFI and transient Immunity
DIN rail mount
CE approved
Premium model - FOSTCDRi - features include 10-48 VDC operation, triple isolation, 2000V input/output power supply, UL Class 1 Div 2 approval, CSA approval, CE approved.
Standard model - FOSTCDR - features include 10-30 VDC operation, 2-way isolation, 2000V input/output, CE approved
|
|
Intelligent PROFIBUS DP - RS232/RS422 Gateway
This low-cost gateway allows you to integrate your serial devices quickly, easily and reliably into a PROFIBUS DP network.
All connected serial devices will work as usual, as our gateway depicts all send and receive sequences 1:1.
The data can be accessed swiftly and exactly. Moreover, our drivers facilitate a preprocessing of data within the gateway. Of course, our drivers can be customized according to your requirements.
XPS-E - extra performance at no extra expense!
|
|
Segment couplers are configuration free and transparent: The segment coupler will “display” all devices connected to the PA network as if they were DP field devices. The communication speed on the PA side is independent of the DP side. All PA devices are configured on Master Class I and Class II as DP instrumentation. PA devices only “see” the PA master of the segment coupler, which simulates the DP Master.
Power Hub versions of the segment coupler are based on motherboards – with optional redundancy for both the power module and the gateway components. They connect up to four independent segments to one DP-Master. The basic models couple single PA segments to DP and provide power to the segment. All components are hosted in one small housing.
|
|
|
|
|
|
MI400E-RD
RS232 to RS422/RS485 fully isolated converter with self configuration & automatic line turn-around
• Self configurable serial link parameters
• Serial link speed : from 50 bps to 2 Mbps
• Automatic RS485 line turn-around, software independent
• MODBUS, JBUS, UNITELWAY, DF1 ... master/slave protocols compatible
• Less than 15uS turn-around delay for speed 48 Kbps
• Configurable polarization & terminating resistors (mini-switches)
• SUB D9 male connector RS232 side, pluggable solderless screw terminal field RS422/485 side
• Built-in 85-264 VAC power supply (47-440 Hz) and 100-370 VDC (MI400E-RD model) or isolated low voltage DC power supply from +9VDC to+36VDC (MI400E-RD-DC model)
• LEDs display for easy RS signals monitoring
• Din Rail, wall, case and rack mounting
• 3 KVeff line galvanic isolation
• Built-in continuous line surge protection (50 VCA), ESD protection (15 KVeff), and lightning protection (shock wave & residual effects)
• Robust metal housing, CE industrial standards conformity
|
|
AD400Ei
All-in-one robust and small factor isolated RS232 250 Kbps to RS422/485 converter
Its width does not exceed that of the RS232 DB9 side.
250 Kbps maximum speed.
Power supply from keyboard/mouse/USB cable or external source (+4.7VDC to +5.5VDC) or optional remote power supply.
Automatic line turn-around in RS485 mode.
MODBUS, JBUS, UNITELWAY, DF1 ... master/slave protocols compatible
Screw-in connecting terminal on RS422/485 side, female SUB D9 on RS232 side.
Metal housing, industrial CE safety.
Line polarization and terminating resistor selectable by DIP switches in RS422/485 mode.
M.T.B.F. > 300.000 POH.
TXD and RXD signal status LED.
Line isolation : 1500 Veff.
HF filtering and 15 KV ESD protection.
External power source cables (keyboard/mouse/USB) and screwdriver are included.
Designed to connect directly to PCs, this converter features a female SUB D9 connector for the RS232 port and a screw-in connecting terminal for the RS422/485 port.
|
|
Introduction
The TCC-100/100I series RS-232 to RS-422/485 converters increase networking capability by extending the RS-232 transmission distance. Both converters have a superior industrial-grade design that includes DIN-rail mounting, terminal block wiring, external terminal block for power, and optical isolation (TCC-100I and TCC-100I-T only). The TCC-100/100I series converters are ideal solutions for converting RS-232 signals to RS-422/485 in critical industrial environments.
Features
• RS-232 to RS-422 conversion with RTS/CTS support
• RS-232 to 2-wire or 4-wire RS-485 conversion
• 2 KV isolation protection (TCC-100I)
• Wall and DIN-rail mounting
• Plug-in terminal block for easy RS-422/485 wiring
• LED indicators for power, Tx, Rx
• -20 to 60°C operating temperature
• Wide temperature model available (-40 to 85°C)
|
|
|
Connect and manage serial devices over IP. ESP multi-interface serial hubs allow serial devices to become IP-enabled using RS-232, RS-422 and RS-485 protocols for industrial/manufacturing environments and commercial applications. It's the ideal solution for reliable and cost-effective serial connectivity at the point of need.
|
|
|
|
|
|
DESCRIPTION
The DCP485 is a compact RS-232 to RS-485 converter which features a complete electrical isolation barrier and heavy duty electrical surge protectors. These devices feature a DIN rail mountable enclosure for application to a junction box, a panel, a relay rack, the sides of computer equipment, or anywhere a DIN rail can be mounted. Isolation is provided by optical couplers and a transformer isolated DC-to-DC converter. The RS-232 connection is through male or female EIA 9-pin D-sub connectors, or a 3-wire RS-232 connection can be made through convenient pluggable screw terminals. The RS-485 connections are made through convenient pluggable solderless screw terminals.
The DCP485 series is designed for full duplex operation over two wire pairs. Outputs are tri-state, allowing multidropping of up to 32 units over one pair. Data rates are DC to 115.2K bits per second (baud). Four diagnostic LED indicators are provided for installation guidance and system troubleshooting. The RS-232 interface includes Request To Send (RTS) and Data Terminal Ready (DTR) either of which can be used via DIP switches to enable the RS-485 transmitter. Alternately, the DCP485 offers automatic line switching in which the RS-485 transmitter is enabled automatically by each character sent on the RS-232 Transmit Data (TD) line. Additionally, the RS-485 transmitter and receiver may be independently enabled continuously or under RS-232 control.
|
|
Product specification:
- It converts a serial signal from RS232 to RS422 and viceversa
- Installation in 35mm DIN-rail
|
|
The USB to CAN bridge/gateway enables communication between two or more devices that use different communication interfaces (RS232 or USB in one device, and CAN in the other).
The converter acts as a bridge and interpreter between the devices.
The USB to CAN bridge/gateway is compatible with standards for CAN messages established in the CAN 2.0A and CAN 2.0B standards.
Main features:
------------------
* Sending and receiving CAN messages in ASCII format.
* Compatible with CAN 2.0A and CAN 2.0B.
* Communication speeds available:
- RS232/USB interface: set at 115200bps.
- CAN interface: 10, 20, 50, 125, 250, 500 or 1000Kbps can be set using ASCII commands.
* Configurable CAN communication parameters:
- Mask.
- Filter.
- Standard (11-bit identifier) or extended mode (29-bit identifier).
- Transmission speed.
* Full report of communication errors obtained.
|
|
USB400
Industrial RS422/485 - USB gateway
The new range of serial to USB solution offers performance, simplicity of installation, security, robustness and high reliability at affordable prices.
USB400 is enclosed in a compact aluminum case (dongle format), it features an industrial 2-4 wire RS422 / RS485 serial interface with 5-point screw-in terminal block.
USB400 installation is quite simple as the product is instantly plug & play, it doesn't require any IRQ, DMA or I/O port resources.
Installed serial ports are considered by Windows 9x, Windows 2000, Windows XP & Linux operating systems as computer's standard COM ports.
|
|
|
|
|
|
Panel Mount - USB to Serial Converters, 2-4 Ports
Connect serial devices to your USB-only PCs
Benefits
Use legacy serial devices with USB PCs and laptops
Connect multiple devices with multi-port models
Features
New! Higher retention USB connector...
Meets Class 1 Div 2 withdrawal requirements (15N)
Add two or four COM ports to your USB PC
LEDs on transmit and receive lines
USB 1.0, 1.1, and 2.0 compatible (12 Mbps)
Automatic configuration on Windows 98, ME, 2000, XP and Vista
No power supply required (powered from USB bus)
Includes 1 meter USB cable
Get the extended range and multi-drop capability of RS-232 or RS-422/485 from the USB port of your PC. Windows automatically configures the serial outputs as additional COM ports, compatible with your Windows application.
RS-232 USB/serial converter unique features
Full handshake support (TD, RD, RTS, CTS, DTR, DSR, DCD, RI, GND)
DB9 male (DTE)
Baud rates up to 460 Kbps
RS-422/485 USB/serial converter unique features
Pluggable terminal blocks
Supports TDA, TDB, RDA, RDB, GND
Baud rates up to 921 Kbps
Use on RS-485 2-wire or RS-422/485 4-wire networks
Supports Send Data Control (SDC)
|
|
Instant Plug & Play
The UPort® 1110/1130/1130I/1150 USB-to-serial converters are the perfect accessory for laptop computers that don’t have a serial port. The UPort® 1110 converts from USB to RS-232, the UPort® 1130/1130I from USB to RS-422/485, and the UPort® 1150 from USB to RS-232/422/485. All three products are compatible with new and legacy serial devices, and can be used with mobile, instrumentation, and point-of-sale applications.
Features:
Compatible with USB 2.0
12 Mbps USB data rate
921.6 Kbps maximum baudrate for super fast data transmission
Drivers provided for Windows, WinCE, and Linux
Mini DB9 female to terminal block adaptor for easy wiring
LEDs for indicating USB and TxD/RxD activity
15 KV ESD protection for all serial ports
2 KV optical isolation protection (UPort® 1130I only)
|
|
Converter DCS770 is low cost unisolated USB to RS485 converter which powers itself from USB.
Converter RCS770 has 3-way galvanic isolation between USB, 232 and 485/422 and supports all conversions between these. If used with USB it powers itself with USB, otherwise it needs power supply.
It has it all.
See our website for more information.
|
|
| ... products without technical information |
| |
|
|
Bus converters, Gateways
