|
|
Korenix JetCon1301 is a compact sized and rugged industrial fast Ethernet media industrial converter with one 10/100M Fast Ethernet copper & one 10/100M single-mode or multimode fiber port. The power input range is either 18~27VAC or 18~32VDC. JetCon 1301 supports wide operating temperature from -10 to 70Ž.
The JetCon1301 is world's first fiber Industrial ethernet converter with pure converter mode design. Pure converter mode design guarantees the packet will never be lost with extreme short data forwarding latency. The pure converter mode design just forwards the signal to link partner without packet checking which is suitable for proprietary communication protocol such as EtherCAT. |
|
MRV provides a full range of media converters, unmanaged and managed, in stand-alone and modular form-factors. These converters cover all major networking protocols, including Ethernet, SONET and FiberChannel, and create fiber-optic links up to 130km on single-mode fiber.
Converts copper to fiber or Multimode to Single Mode
Compatible with numerous protocol standards, including Ethernet, SONET, and Fiber Channel
Provides distances up to 10km on MM, 130 km on SM
Low Temperature option – operating at a wide temperature range (-45C to +60C)
|
|
Media converters for translation between copper and fibre optic media
Weidmüller Industrial Ethernet media converters provide a solution for industrial applications that require a highly reliable, robust data exchange between copper and glass fibre media. Media converters are cost-effective devices and give users the option of integrating fibre optics into their networks. The Weidmüller media converters are real-time-compatible and remain transparent in the network.
|
|
Connects your PROFIBUS to Ethernet
-Scalable from one PB channel to up to three PB channels per device
-Master or slave
-Ethernet 100BASE-TX / 10BASE-T, 100Mbits/s and 10 Mbits/s
-Application interface identical to Profibus interface cards
-PC drivers for Windows
-No fan
-OPC server available
-Suitable for use with DTM / FDT
|
|
The Westermo Fieldbus devices are industrial PROFIBUS DP modules. There are different types of slave modules and one Master module. PROFIBUS adapters that is able to transfer PROFIBUS DP I/O data via serial communication. I.e leased lines, dial up industrial modems, Ethernet adapters, GSM modems or radio modems without any use of special drivers or special PLC bords. The FD-20, PROFIBUS DP Master module act the same way as the adapters on the serial side and act as a stand alone master on the PROFIBUS side. A combination with our Ethernet adapter gives the opportunity to connect PROFIBUS to Ethernet PROFIBUS DP industrial converter to make a transparent connection for a different serial interfaces to a PROFIBUS DP network. |
|
BradCommunications gateways allow the integration of PROFIBUS with other networks and devices easily and seamlessly and are available for a multitude of applications.
Multi-protocol intelligent gateway - the applicom GATEway is a configurable stand-alone intelligent gateway that allows plant-floor devices to communicate and to interoperate simultaneously with each other through Ethernet TCP/IP, Serial and Profibus networks. The applicom GATEway performs all communication tasks to exchange data between devices by running automatic read/write cyclic functions. By running 20 different protocols simultaneously, the applicom GATEway allows you to set up more than 20,000 different combinations to create industrial architectures such as data translator, data concentrator and industrial firewall.
Simple gateway adapters - the Direct-Link family of gateways is designed to connect two different industrial networks in an easy and cost-effective way. No programming is necessary; the gateway transfers cyclically I/O data between two networks according to the user configuration.
|
|
Fieldbus Network Link: Ethernet/PROFIBUS Gateway
The optimal solution for connection of fieldbus and Ethernet networks of up to 100 Mbit/s. |
|
102PC-SE Serial to Ethernet Protocol Industrial converter
Serial to Ethernet Protocol Converter
One Male DB9 Serial Port w/DCE device
One RJ-45 10/100BaseTX Copper Port
Compact Size, Smaller Footprint
Provides Remote Monitoring, Control and Configuration of any Serial Device
Full SNMP and Web Browsing Management
256 Frame Buffer for Ethernet Bridging
Hardened ESD Protection Diodes on RJ-45 Port
Surge protection Diodes on Power Inputs
Redundant Power Inputs (10-30VDC)
Extended Environmental Specifications
- 0º to 70ºC Operating Temperature
- >2M Hours Measured MTBF
LED Link/Activity Status Indication
Rugged Industrial DIN-Rail Enclosure with Optional Panel mount kit |
|
| The EM1500 Serial-Ethernet Bridge is a device that converts multi-point serial communications to a TCP/IP network. The EM1500 connects to and network enables as many as 4 RS-232 serial devices simultaneously, while also acting as master on a multi-drop RS-485 network. In addition, the EM1500 provides an SPDT relay, 2 digital open collector outputs and 3 digital inputs suitable for interfacing to mechanical switches or logic level circuits. |
|
Combine a 100Mb Fibre Media Professional converter and a 2-port 10/100 copper Professional switch. Add in fibre port choices for all multi-mode and single-mode fibre connector suppliers types plus AC or DC input power selection and multiple application environments, and you have a new flexible edge-of-the-network Ethernet product: the CS14 Converter Switch. The compact package is ideal for network edge installations, and is able to be conveniently mounted to suit any application.
The CS14 regular-package units are for office and indoor wiring closet environments. The ambient temperature rating is 0ºC to 40ºC. A robust metal professional case with convection cooling is featured. Metal mouting professional clips are included, and rack-mounted tray options are available.
The CS14H hardened units are for factory floor applications. The ambient temperature rating is for industrial use. No internal air flow is required for cooling, so it resists dust, dirt, moisture, smoke and insects. Mounting option include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
The CS14P Premium-rated units are for temperature uncontrolled sheltered applications. Mounting options include stand-alone panel-mounting, DIN-Rail, or rack-mount tray.
Please visit our website for the full product information. |
|
For any user who needs a 10Mb fibre link connected to one ot two 10/100 copper devices, the "go anywhere" CSN14 Professional converter Professional switch is a versatile and handy solution.
The CSN14 family of Converter Switches, with a 10Mb Fibre port built-in covers the full range of application environments with regular (office), hardened (factory floor), and Premium-rated (outdoor) versions.
The CSN14 regular-package units are for office and indoor wiring closet environments. An external Alternating current power supply for either North America (-d, 115vac 60Hz) or international (-i, 230vac, 50Hz) is included. The ambient temperature rating is 0º to 40ºC. It is convection cooled. Metal mounting professional clips are included, and rack-mount tray options are available.
The CSN14 Hardened units are for factory floor applications. It resists dust, sirt, moisture, smoke and insects. Mounting options include stand-alone professional panel mounting, DIN-rail, or rack-mount tray.
The CSN14 Premium-rated units are for temperature uncontrolled applications. In addition to a Premium-rated AC power option and professional jack, terminals for internal DC power choices at 8 to 15V, 24V or -48V DC are included. Mounting options include stand-alone panel-mounting, DIN-rail, or rack-mount tray.
Please visit our website for full product specifications. |
|
JetCon2401 is a Multi-serial to fiber media industrial converter which adopts RS-232/RS-422/RS-485 triple mode circuits with auto baud rate and direction control. It extends the serial signal link distance to 5KM (JetCon2401-m Multi-mode Optical Fiber) or 40KM (JetCon2401-s Single-mode Optical Fiber) and also provides good immunity of EMI/EMS.
To ensure nonstop transmission in hazardous environment, JetCon2401 supports wide operating temperature range, -20°~70° model (JetCon2401).
Further more, JetCon2401 supports wide range power input (DC/AC) and DIN rail mount for quick and easy installation.
|
|
The optical networking features a safe datatransmission and is suited for example to transmit PROFIBUS, MODBUS-PLUS and many other manufacturer specific systems. These innovative systems can be realisedin bus-, star- or tree-structures as well as electric-optic mixed structures. Beyond this the systems are also able to transmit RS 232, TTY- or RS 422-Protokolls.
The systems of the d-Light series are mainly suitable for applications with high safetytechnical requirements for example in the climatic und air ventilation application used in tunnel ventilations or in the railwaytechnics.
As an important performance of the Transmission with POF, HCS, multimode or singlemode fiber optics obtains the ruggedness to electrical and magnetical interferences, the potential separation of transmitter and receiver as well as ranges to 40km between 2 fiber optic systems.
Trough the continuos expansion of our productportfolio the fiber optic centre of eks provides not only standard components and customer specific solutions. We allthough offer the fiber optic cabels and the packaging. The competent planningsupport of the eks fiber optic team from the project beginning until the realisation tops our Quotation - fiber optic from one hand - of our expanding company off. |
|
CAN 300
The CAN 300 module from the Systeme Helmholz GmbH for use in a S7-3001) from Siemens permits connection of CAN stations with the programmable driver. The module can be slotted either into the central controller or into the expansion unit.
The CAN 300 modules support both CAN 2.0A (11 bit) and CAN 2.0B (29 bit) frames with a free selectable baudrate of 10 Kbit/s to 1 Mbit/s.
The CAN 300 module can also be run as Layer 2, CANopen Master, CANopen Slave and with Lenze System bus.
The CAN 300 module contains the power management functions „Power On“, „Stop -> Run“ and „Run-> Stop“. IDs relevant to the programmable controller can be prefiltered using a 5-level acceptance mask.
In CAN 300 modules, 11 free settable timers are available. Each timer can trigger a free programmable CAN frame. In that way, it is simple to implement synchronous protocols commonly used in drive and servo control using the CAN 300 module.
CAN 400
The CAN 400 module from Systeme Helmholz GmbH for use in a S7-4001) from Siemens, permits connection of CAN stations with a programmable controller. The module can be slotted either into the central controller or into the expansion unit.
The CAN 400 modules support both CAN 2.0A (11 bits) and CAN 2.0B (29 bits) frames with a free selectable baudrate of 10Kbit/s to 1Mbit/s, or free editable bit timing.
The CAN 400 module can also be run as Layer 2, CANopen Maste and CANopen Slave.
LENZE Systembus in development.
The CAN 400 module contains the scripts "Power On", "Stop -> Run", "Run-> Stop", “Power Off”. Ids relevant to the programmable controller can be prefiltered using a 5-level acceptance mask.
In CAN 400 modules, 16 free settable timers up to a resolution of 1 ms are available.
Each of them can trigger a free programmable CAN frame. In that way, it is simple to implement synchronous protocols commonly used in drive and servo control using the CAN 400 module.
1) S7 400 is a registered trademark of Siemens AG
|
|
The new versions of NETLink PRO and the S7/S5 OPC Server, as well as Softing’s new S5-PCLink, have expanded the suite of Softing products for convenient, powerful and economical access to data in SIMATIC S7 and S5 controllers. NETLink PRO, which was recently recognized as one of the top developments of 2006, is a robust S7 adapter available in Ethernet and USB versions. In hundreds of installations worldwide, it has proven itself to be an economical alternative to the communications processors from Siemens and other manufacturers. The new Version 1.3 is up to 20% faster than its predecessor, and it supports up to 12 MPI/PROFIBUS connections at once. With a single NETLink PRO, you can easily access up to twelve S7 controllers using Siemens STEP7, WinCC, ProTool or the Softing S7/S5 OPC server. The Ethernet version, known as NETLink PRO/ETH, now also supports the RFC 1006 protocol (ISO-on-TCP).
Alongside the adapters for S7 systems, Softing's new S5-PCLink enables economical access to S5 controllers via Ethernet, STEP5 or the Softing S7/S5 OPC server.
STEP®, WinCC®, ProTool® and SIMATIC® are registered trademarks of Siemens AG.
|
|
A new dimension to deltadue® series
232/485 converter - deltadue® Manager - Industrial gateway
The Manager function uploads and stores the configuration of all deltadue® modules, to download it when the fault module will be changed.
The Gateway function performs the protocol convertion/optimisation from Modbus RTU-Profibus-DeviceNet to Modbus RTU.
Two serial SLAVE ports allow to use simultaneously 2 MASTERS devices with the same modules group.
|
|
UP for an industrial strength painkiller?
Enabling communication from factory floor devices to PLC controllers just got a whole lot easier. The DeviceMaster UP industrial ethernet bridge offers a flashable solution that configures in minutes via the web, allowing you to support the major industrial Ethernet PLC networks – EtherNet/IP, PROFINET, or Modbus/TCP – on a single platform.
Whichever protocol you need, the DeviceMaster UP provides an RS-232/422/485 software-selectable connection to an industrial Ethernet network.
By accommodating multiple protocols, the DeviceMaster UP provides an adaptable and flexible platform device integrators and distributors need to thrive in rapidly changing markets. It's the pain-free Industrial Ethernet solution that simplifies supply chain management and reduces expenses for you and your customers.
It's power over protocol.
DeviceMaster UP Highlights
DualConnectPlus™ Technology – simultaneously connect both serial and Ethernet devices to Plcs and/or applications. String, RFID, and barcode data filtering eliminates redundant data while extracting the RFID and barcode parameters.
Provide PLC connectivity to standard serial devices with flashable protocol support for EtherNet/IP, PROFINET, Modbus/TCP, and TCP/IP
Compact and hardened form-factor — wide -37° to 74°C industrial temperature range
Variable power input eliminates need for power converters
PortVision® enables user to view status, update firmware and resolve issues remotely.
RoHS Directive 2002/95/EC compliant |
|
Safety interface, galvanic isolator and field industrial gateway
The multi-channel gateway integrates Enraf’s field equipment into tank terminal information systems.
The SmartLink provides a physical layer conversion from serial RS232C/RS485 GPU communication to Bi-Phase Mark GPU field bus.With the modular design of the SmartLink this gateway becomes scalable from small towards large tank terminal installations.
The SmartLink can be expanded from one to three field busses of the worlds standard field communication in tank gauging, Enraf’s GPU Bi-Phase Mark.
The GPU/BPM field bus guarantees a stable, long distance, galvanic isolated digital communication link for integration of Enraf field equipment. Avoiding grounding issues and protecting against damages resulting from lightning strikes on the field communication lines. The SmartLink is fully transparent to the GPU communication.
|
|
Director
The Director (DS4) is an expandable Industrial Network Gateway built around Eurotech Ltd's APEX software core enabling both operational and financial data to be acquired, networked, transformed and utilised efficiently taking full advantage of the TCP/IP technologies and communication networks.
Features
Architecture Single boards
Processor/clock speed Intel 386EX CPU @ 25MHz
Memory 1MB SRAM with battery back-up and 1MB Flash
Operating system APEX
Configuration ACE
Size 4 1/8" x 6 1/2" x 4 3/8"
Mounting Panel mount
Watchdog Hardware with start-up or software trigger
Serial ports 3 x RS232 and 1 x RS232/RS485 selectable
Protocol Multiple protocol support
Power requirements 18 - 36V DC input range
Power consumption 3W (maximum, with standard board set only)
Operating Temperature -40 to 70°C at 25MHz
Humidity 0 to 95% relative, non condensing
Diagnostics Serial MMI or Telnet
Networking TCP/IP serially or RJ-45 10BaseT Ethernet
Calendar/Clock RTC with battery back-up
Input/output 3 available slots for PC/104 expansion modules
|
|
RFID-EC-IC
The RFID Edge Controller Industrial Compact Enclosure (RFID-EC-IC) is designed to be installed in harsh warehouse and factory floor locations where space is at a premium and co-location with remote RFID infrastructure is required. Eurotech Ltd's RFID Edge Controller (RFID-EC) works in conjunction with IBM's WebSphere RFID Premises Server to provide a complete end-to-end solution. The basic premise of the RFID-EC is to provide the hardware and software interfaces required by many of the individual devices (sensors, discrete I/O, PLC SUPPLIERS's, etc) within a customer's facility.
Features
Fitted with Eurotech Ltd's VIPER SBC
Input voltage range 10 - 36V DC (10 - 25V AC)
Battery backed operation for over 2 hours of normal operation
Operating temperature: 0°C to 55°C
Weight: 1.7Kg including VIPER, VIPER-UPS
Enclosure dimensions: 200mm x 210mm x 105.2mm including mounting feet
RJ45 Ethernet connector specification with activity and link LEDs
4 x RS232 on standard DB9
1 x RS485/422 on DB9
2 x USB host ports
CompactFlash (CF ) Socket
|
|
The Latest in the OCS Range Integrates Screen, PLC SUPPLIERS, Network and I/O "All in One" Product.
The OCS NX has the following features:-
- 128x64 or 240x128 Pixel Backlit LCD Screen.
- Embedded Ethernet.
- Optional Fieldbuses.
- Compact Flash.
- Smartstack Interface.
- 2 Serial Ports.
- USB Programming Port.
- Fibre Optic Interface.
- Integrated Fast Counter I/O.
- Membrane with Function Keys.
- Optional Touchscreen.
- Optional Integrated Base I/O.
Instead of using Separate components (PLC, HMI , Network and I/O) to form a solution , Horner has integrated this functionality into a single product – the Operator Control Station (OCS).
The OCS provides a complete solution and is easily programmed by a SINGLE software package called CSCAPE which allows screens to be easily embedded in the Logic Programme whether it is LD, IL, ST , SFC or FBD it is incredibily easy to use.
Contact us for more Pre Release Information
|
|
Controllers / Gateways
AS-i controllers, gateways, masters and repeaters are elementary components of AS-i networks. These components are most of the time placed in the control cabinet and ensure data communication, extension and power dispensing of the connected slaves, sensors and actuators suppliers. |
|
| AS-Interface networks up to 62 field devices onto a single pair of wires that delivers both signal and power. Manufacturers of actuator Sensor Interface, or AS-Interface, was developed by a group of sensor manufacturers and introduced into the market in 1994. Since that time, it has become the de facto standard for discrete sensors in process industries throughout the world. AS-Interface may be used in hazardous process environments using explosion proof, tray cable, nonincendive and for nonincendive wiring protection concepts. |
|
UP for an industrial strength painkiller?
Enabling communication from factory floor devices to PLC controllers just got a whole lot easier. The DeviceMaster UP offers a flashable solution that configures in minutes via the web, allowing you to support the major industrial Ethernet PLC networks – EtherNet/IP, PROFINET, or Modbus/TCP – on a single platform.
Whichever protocol you need, the DeviceMaster UP provides an RS-232/422/485 software-selectable connection to an industrial Ethernet network.
By accommodating multiple protocols, the DeviceMaster UP provides an adaptable and flexible platform device integrators and distributors need to thrive in rapidly changing markets. It's the pain-free Industrial Ethernet solution that simplifies supply chain management and reduces expenses for you and your customers.
It's power over protocol.
Highlights
DualConnectPlus™ Technology – simultaneously connect both serial and Ethernet devices to Plcs and/or applications. String, RFID, and barcode data filtering eliminates redundant data while extracting the RFID and barcode parameters.
Provide PLC connectivity to standard serial devices with flashable protocol support for EtherNet/IP, PROFINET, Modbus/TCP, and TCP/IP
Compact and hardened form-factor — wide -37° to 74°C industrial temperature range
Variable power input eliminates need for power converters
PortVision® enables user to view status, update firmware and resolve issues remotely.
RoHS Directive 2002/95/EC compliant |
|
DeviceMaster UP Industrial Industrial ethernet gateways
Enabling communication from factory floor devices to PLC controllers just got a whole lot easier. The DeviceMaster UP offers a flashable solution that configures in minutes via the web, allowing you to support the major industrial Ethernet PLC networks – EtherNet/IP, PROFINET, or Modbus/TCP – on a single platform.
Whichever protocol you need, the DeviceMaster UP provides an RS-232/422/485 software-selectable connection to an industrial Ethernet network.
By accommodating multiple protocols, the DeviceMaster UP provides an adaptable and flexible platform device integrators and distributors need to thrive in rapidly changing markets. It's the pain-free Industrial Ethernet solution that simplifies supply chain management and reduces expenses for you and your customers.
It's power over protocol.
Highlights
DualConnectPlus™ Technology – simultaneously connect both serial and Ethernet devices to Industrial plcs and/or applications. String, RFID, and barcode data filtering eliminates redundant data while extracting the RFID and barcode parameters.
Provide PLC connectivity to standard serial devices with flashable protocol support for EtherNet/IP, PROFINET, Modbus/TCP, and TCP/IP
Compact and hardened form-factor — wide -37° to 74°C industrial temperature range
Variable power input eliminates need for power converters
PortVision® enables user to view status, update firmware and resolve issues remotely.
RoHS Directive 2002/95/EC |
|
Industrial ethernet gateway - echochange connects Ethernet worlds
More and more Ethernet is being used in industry. Serveral protocols based on Ethernet are available: ISO (H1), ISO on TCP (RFC1006) or EtherNet/IP. Although these protocols are similar, communication between the corresponding networks is not that simple.
Echochange provides the solution:
This produces „relationships“ between plants that were previously incompatible. The gateway may be configured locally or remotely and supports up to 30 active connections. The configuration software provides comprehensive diagnosis functions.
Special Features:
Connects different controller worlds
▪ Siemens (S7, S5)
▪ Rockwell Automation
(Allen-Bradley)
▪ Schneider Electric (Modicon)
Separated Ethernet networks
are connected via specific
parameterized connections
Connection of TCP/IP computers
with ISO (H1) networks
Remote maintenance of Plcs in an ISO (H1) network via TCP/IP
Gateway between separated networks (protocols run at the same media)
Industrial converter in a heterogeneous network (protocols run at the same media)
Easy configuration: Online via IP or ISO (H1), serial or offline for later transfer |
|
The Z-PC series has been developed to offer flexible, cost effective solutions to industry’s increasingly diverse applications including distributed control, data acquisition suppliers, SCADA & telemetry. An ideal solution for process control and management using distributed I/O on plant and machinery. The I/O modules can be widely distributed or grouped together and accept all standard field signals. Modbus RTU protocol (see ModBUS Tutorial) guarantees universal connectivity so applications are limitless: data acquisition, automation, telemetry control, etc. Features highlights are:
Analogue I/O modules: universal inputs, Pid regulator, up to 8 inputs per module, special modules; digital I/O modules: up to 10 inputs or outputs per module for direct control of alarms, indicators, valves, interlocks etc.; communication modules as wireless Radio link modules, (Z-link, license free UHF transceivers) & standard serial converters; control units (Z-TWS, Z-RTU, etc) control module features “soft PLC MANUFACTURERS” capability, web server functionality, bridge TCP/IP, 32 bit processor, 16MB flash and 8 MB RAM. |
|
The BradCommunications applicom® PROFINET IO Proxy provides access to PROFIBUS-DP devices via the PROFINET Real-Time Channel.
Besides the Real-Time connection, automation devices from different suppliers (e.g. Rockwell, Schneider, Mitsubishi or Omron) which are linked to the integrated Ethernet and Serial ports can be used by the PROFINET Controller or Supervisory station.
Protocols available: Ethernet TCP/IP (Client/Server); Siemens Industrial Ethernet (S5/S7/TI); Altus - Alnet II ; Allen Bradley EtherNet/IP (PCCC); Schneider UNI-TE; Open Modbus; Mitsubishi Melsec A & Q; Omron FINS; GE Fanuc SRTP ; Serial; Modbus RTU (Master/Slave) / Modbus ASCII (Master/Slave); Profibus; PROFIBUS DP-V0 Master Class1 & Class2; PROFIBUS DP-V0 Slave; PROFIBUS S7/MPI Client (S7-30 | | |
Bus converters, Gateways
