Forestry harvesters, Skidders, Forwarders, ...

73 companies | 694 products

The 830 M, which is manufactured by Sennebogen, is a material handler that...

The timber handling machine of SENNEBOGEN are durable and very efficient...

The 718 Mobile Energy is a Timber handling machine from Sennebogen is adequate for use in cutting free of roads and forest paths...

The 718 crawler is a Timber handling machine from Sennebogen that is designed to harvest timber and for thinning forests. It is operational in heavy soil or wetlands...

Timber 723 Mobile HD handling machine from Sennebogen has an operating weight of 22...

{{productDetail[40145]}}

Area of Application:

The Knife Ring Flaker, series PZKR is used for dry- and wet preparation of chips into flakes at best possible consistent flake geometry and -quality. Flakes so produced are optimally suitable for particleboard production, briquetting and pelletizing

...

Area of Application:

The Hammer Mill, series PHMS is used for the economical preparation of chips from round-, residual...

Area of Application:

The Double Stream Mill, series PSKM is used...

Area of Application:

The Drum Debarker, type PDD was developed for the economical and gentle debarking...

The Rotor Debarker, type PRD is not only used in the OSB industry but...

{{productDetail[63389]}}

Wood splitter WS is attachment for tractors, skid-steer loaders,...

{{productDetail[158017]}}

Cutting diameter up to 400mm.

Quick and easy adjustment of the cutting length from 150mm up to 500mm.

Adaptable onto Tractor 3-point linkage or Three-phased electric engine.

Automatic...

Maximum cutting diameter 550mm.

Adjustable cutting length from 0.25m up to 0.50m.

35T powered cylinder with automatic speed with continuing variation ISO POWER.

Hydraulic adjustment...

Splitting power: 13, 14, 16 or 1 tonnes according to the model.

Very good value for money.

NEW: manual double lowering speed MANU2SPEED:
Slow speed = more...

General characteristics

80 tons power with double automatic cylinder speed AUTO2SPEED
- slow speed = full power
- fast speed = more productivity

Quickly...

Adaptable on excavators from 1,5 to 2,5 tons with or without quick fit coupling

Disc with 20 mm thickness, Ø 440mm for more inertia

Teeth...

{{productDetail[41260]}}

Saw bench Seesaws 600-700W could be supply with 3
points PTO or AC 230/400 Volts Electric Motors,and Cutting
Disk diam 600-700...

{{productDetail[160344]}}

Compact design, powerful, and easy to operate. The best solution for whoever wants to split the wood at home, whenever, wherever!

With 4 tons of thrust, this log splitter can split even the most sturdy wood logs in a few minutes (even logs of over 25 cm of diameter). The special guides keep the log...

As a result from BELL experience, which has been assembling professional log splitter for years, TURBO 7 is made of technical innovations and features unbelievable to be put on home-use machine until today!

7 tons of thrust to...

Compact design, powerful, and easy to operate. The best solution for whoever wants to split the wood at home, whenever, wherever!

With 4 tons of thrust, this log splitter can split even the most sturdy wood logs in a few minutes (even logs of over 25 cm of diameter). The special guides keep the log...

BOLIK 50 "US" and BOLIK 100 "US", the horizontal log splitters with an innovative concept, suitable for the professional and home use. A strong structure in an aggreable shape together with a great active and passive security make BOLIK "US" a machine leader in his category, comfortable to be operated and moved in the working environement, with...

The horizontal log splitter SP 21 by BELL is the best choice for the family. Practical, easy to use, compact and safe. Preparing the wood has never been so easy!

SP 21 is compact and powerful....

{{productDetail[17502]}}

The 160C is a small caterpillar track, motorized by an 160hp Caterpillar diesel engine and equipped with its shredder....

The 200NF is the civil version of the EGAME, the military vehicle. Each time a product is developed, UNAC's policy is to design a machine from A to Z that is adapted to the work milieu, whilst conserving the experience obtained from the trencher...

The 300NF has a 9t weight in use conditions, without the tool. Its optimized size confers it an high capacity to move in undergrowth without being disturbed by the vegetation.
UNAC...

The 400NF is the largest vehicle in the forestry range. It chrushes everything in its path, without any difficulty.
The 400NF was specially designed for large scale forestry work :
Steel bodywork, 3 to 6mm thick,...

{{productDetail[56932]}}

Description:
A great landscaping tool to cut off small branches, unwanted weeds...

{{productDetail[41303]}}

The chipper canter processes round...

The chipper canter processes round...

{{productDetail[117065]}}

With the Logosol Sawmill M8 you can quickly produce high-class planks and boards from your logs, in the length and dimensions of your choice. The sawmill is simple to use and easy to own.

Immediate good result

If...

M5 is a refined version of the original Logosol sawmill, introduced in 1989, which has now reached its optimal function. M5 is the most...

The Woodworker's Mill is a woodworking tool capable of quartersawing, resawing, cutting curved lumber, bookmatching, cutting perfect bowl blanks and more. Plus it's fun to use!
This mill is perfect for short, fat logs, where lots of lumber...

Have you ever dreamed of being able to cut your own lumber, but not have the land or resources to do it? This little mill can have you cutting lumber quickly and simply. Like all Logosol products, this device features...

Components: Big Mill TimberJig, Guide rail supports, Guide rail 2.75 m (9 ft).
Log Diameter: Max. 80 cm (32").

For higher precision and flexibility when choosing how to cut the log.
With the TimberJig with guide rail, you get both the advantages of a hand held...

{{productDetail[98957]}}

Forestry, Gardening, Construction


Excavator, backhoe loader, from 1,500 to 10,000 Kg


The first stump grinder to be built...

{{productDetail[64305]}}

The Drum Mill , developed by Pessa, is built suitable for the production of chips...

Small size chippers designed for the...

Pessa Machines are available in 3 model configurations, for conversion of dry pieces into fines for...

{{productDetail[115533]}}

Forespro Telescopic Boom Delimber

The Telescopic model produces faster cycles, is more compact, has longer boom reach and has the versatility to fit most operating conditions. It can deliver...

Ideal in large softwoods or the toughest hardwoods. It can deliver the highest delimbing force, with drive motor and sprocket size matched for the job.

Quadco’s Forespro®...

Quadco 56″ mower mulches vegetation into fine material, discharging directly to the ground.

The drum mower is designed to...

{{productDetail[57640]}}

PONSSE ActiveFrame is a new cabin suspension system for 8-wheelers. It has a simple and functional structure, suspending any sideways movement directed at the driver effectively and unnoticeably.

As a result, driving is very comfortable and...

The PONSSE Bear 8w harvester offers amazing execution for heavyweight timber gathering. Its key qualities incorporate unparalleled engine and hydrodynamics productivity. Ponsses most capable crane ever and the solid PONSSE H8 harvester head provides an unequaled...

The PONSSE ScorpionKing provides optimum visibility, steering, stability, power and productivity. It has an eeconomical design that improves productivity in the most challenging...

The PONSSE Scorpion provides optimum visibility, steering, stability, power and productivity. It has an ergonomic design that improves productivity in harvesting and sets the future...

The PONSSE Ergo 8w harvester features slewing/lifting torque (gross) up to 57 kNm/258 kNm, weight of 20,500 kg, and a 250° crane turning angle. It can be equipped with 3 crane...

{{productDetail[56915]}}

The 541 series 2, which is manufactured by Cat, is a track feller buncher that has a compact...

The 552 Series 2 range of track feller bunchers is specially designed for heavy duty...

The CAT 553C has the same performance, reliability and serviceablility of 563C...

The 573C Wheel Feller Bunchers is the largest machine in the C Series...

The 320D FM Forest Machine model utilizes a Cat C6.4 ACERT engine, modified according...

{{productDetail[19427]}}

This is a tough machine that is perfect for tough jobs. It is small in size but not a weakling. It is featured with heavy duty - undercarriage, rugged upper structure, strong travel systems and tough swing for handling even...

The ZX240F-3 is considered to be the perfect machine in terms of effective capacity. The ZX240F - 3 is known to provide topmost classy, computer-chip-controlled engine/hydraulic achievement. It has numerous features, such as - vigorous, travel units that are strengthened, rocky top-format...

The ZX290F-3 series from Hitachi offers exceptional work performance and a strengthened computer-chip-regulated engine/hydraulic results. It has a capacity to deal with various tasks such as reinforced, firm top-design...

The ZX370F-3 series offer exceptional work performance and a strengthened computer-chip-regulated engine/hydraulic results. It has a capacity to deal with various tasks such as reinforced, firm top-design and loaded undercarriage...

{{productDetail[21104]}}

The new Chippo 8010 C is the highest-performance member of the Chippo family. Powered by a 780 HP CAT auxiliary engine, the 8010 C produces up to 320 stacked...

The Chippo 510 C is a tractor-driven drum chipper for wood trunks and pruning. The machine is designed for a drive rating of up to 500 HP,...

The name Chippo is synonymous with a new generation of mobile chipping machines for the highest level of wood chipping quality at the...

{{productDetail[62674]}}

The new Prentice C Series wheel feller bunchers raise the bar to lower your owning and operating costs by improving serviceability, performance, stability, agility, reliability and operator comfort.

Significant advances include:

First and only wheel feller buncher with...

Prentice forwarders are designed for dependable production no matter the terrain or job situation. Robust construction,...

Prentice 2090 and 2190 Track Harvester models were designed for maximum productivity and efficiency under a wide variety of logging...

The Prentice 2410 Pipe Handler provides the ability to carefully lift and place pipe joints with precision...

The Prentice 2124 has a light-weight, yet strong A-frame design based on a clean,...

{{productDetail[57004]}}
Subscribe to our newsletter
Thank you for subscribing
There was a problem with your request
Invalid email address

Receive updates on this section every two weeks.

With DirectIndustry you can: Find a nearby distributor | Contact the manufacturer to get an estimate or a price Examine product characteristics and technical specifications | View PDF catalogs and other online documentation