- Production Machines >
- Cutting Machine >
- Other cutting machines
Other cutting machines
XBM-I Plastic Film Cutting Machine Overview It is mainly used to make strips of bidirectional tensile film(BOPP、BOPC、BOPET、BOPA), unidirectional tensile film and composite membrane. Standard GB/T1040.3-2006, ISO527-3:1995 and the equivalent. ...
X travel: 45 mm
Y travel: 80 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
X travel: 65 mm
Y travel: 80 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
X travel: 80 mm
Y travel: 300 mm
YVROUD offers a wide range of guillotine cutters, with different capacities. Many variants and adaptations are available depending on the intended application: • Motorised mobile cutters. • Cutter with built-in puller. • Chisel ...
YVROUD
Speed: 180,000 mm/min
StarCut 520 The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one machine ...
Speed: 180,000 mm/min
Cutter 520-S1 The most important The electronic gear allows cutting any size and adapts to the register mark by the tactile touch screen. The speed is taken from the host system by an encoder or dancer. It can be moved from one ...
Labeltech Eiger 350/450 LABELTECH offers an highly flexible machine to die cut plain and printed labels. MAIN FEATURES: • Servo drive motorizations on nip roll, die cut and matrix rewinder for: • - the best synchronization between ...
X travel: 50 mm
Y travel: 200 mm
Z travel: 50 mm
GTQ-5000A cutting machine is suitable for metal, electronic components, crystal, hard alloy, rock, ore, concrete, organic material, biological material(tooth, bone)and other materials. The equipment set high precision location and have ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
X travel: 40 mm
Maximum cutting height: 20 mm
Laser power: 120 W
The machine is composed of fuselage, control panel, protective cover of cutting room, motor, transverse feed mechanism, loading lever mechanism, cooling system, diamond cutting piece and other components. It can not only cut circular ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
Tube diameter: 110 mm
Weight: 400 kg
LDQ-350 Manual cutting machine is designed and manufactured according to the European health and safty standards. The series of machines consist of controing system,cutting systems,lighting system,cooling system and cleaning system.Super ...
Laizhou Weiyi Experiment Machine Manufacturing Co., Ltd.
X travel: 1,500 mm - 7,500 mm
Y travel: 1,000 mm - 3,200 mm
Z travel: 50 mm
As an all-round talent, the cut expert ecocam 2 is suitable for every material and every production step with the right tool. Thus enabling a high degree of flexibility. Whether single or multilayer - thanks to the variable calibration ...
Equipped with a cable towing device as standard, so the cable runs in a drag chain below the cutting device. All made in anodized matt aluminum or RAL 9006 coated. This endcutter has no annoying cable floating device above the workplace ...
Impulsa
This bean cutter is designed for cutting whole green beans. The model 11 is equipped with an axis with round blade and is used for longitudinal cuts. The model 11A is provided with a cleaver-axis and is suitable for horizontal cutting. ...
Herbort
The new cutting machine of the 26-line was designed to cut potatoes and similar products into wedges. The product enters the machine via the movable feeding hopper. The V-shaped conveyor belts transport it towards the cutting part of ...
Herbort
The breaker was designed to break frozen goods. The machine exists of adjustable breaking rollers, a storage silo and a vibrating gutter to separate small parts. TECHNICAL DATA Capacity - 500 Liter Max. capacity - 1100 Liter Drum ...
Herbort
*Mitigating the fabric tension & distortion which is contained in the fabric roll, and will resolve the problem of instability factors on the sensitive fabric. *Minimizing the size differential during sewing process, and maximizing the ...
Tube diameter: 10 mm
Overall length: 36 cm
Overall width: 20 cm
Pneumatic Semi-automatic diptube cutting machine SPEEDCUT 21 is an irreplaceable tool for cutting any diptube thanks to its simple mechanism and cost efficiency. By inserting the tube into a custom made hole and applying a slight pressure, ...
Cutting speed: 0.813 m/s
Marken 500 A Automatic Guillotine Cutter -Will cut 1/16" up to 2" OD Non-wire reinforced hose and tubing -Consistent cutting of length -Fully automatic -Heavy duty -Fast -Minimum maintenance -Easy operation -Direct take-up from most ...
Marken Manufacturing
Cutting speed: 0.914 m/s
The 450 A is an automatic cutting machine for hydraulic hoses, manufactured by Marken Manufacturing. This product can operate with a maximum feed rate of 180FPM, and can accomplish 200cuts/hr. It has an accuracy ranging from 0.1% to 0.3% ...
Marken Manufacturing
Cutting speed: 0.914 m/s
The 475 A is an automatic cutting machine for hydraulic hose, manufactured by Marken Manufacturing. This product can operate with a maximum rate of feed 180FPM and can produce 2000cuts/hr. It has an accuracy ranging from 0.1% to 0.3% ...
Marken Manufacturing
•Robust mechanical design suitable for high speed operations. •Maximum performance with high quality materials used on production. •High capacity thanks to independent operation of processing, cutting and screwing units. •FA 1030 processing, ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
•Robust mechanical design suitable for high speed operations. •Maximum performance with high quality materials used on production. •High capacity thanks to independent operation of processing, cutting and screwing units. •FA 1030 processing, ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
General Property o - It performs the milling and cutting operations of the profiles. o - There is a SERVO motor-controlled processing unit that allows all desired operations on the part. o - Stress relieving method has been applied ...
KABAN MAKINA SANAYI VE TIC. LTD. STI
Uniform nishing Does not cut into the material Biocompatibility Safe deburring High-tech ceramic Wide knife-edge Ergonomic handle
The punch allows to cut out test pieces up to a thickness of 6 mm. The test pieces are dimensioned in accordance with DVS standard 2225 part 4 for stripes from 15,20 and 25mm
The Pathfinder L-series automatic knife cutting system is the latest in single-low ply cutting technology for composites. The Intuitive PathCut® cutter control software provides the ultimate flexibility from a single operator interface ...
Pathfinder Australia Pty Ltd
Overall length: 3,960 mm
Overall width: 3,006, 4,006 mm
Height: 2,930 mm
Centering of the fabric, detection devices and sensors to control the cut, cutting section, plaiting. The longitudinal cutting machine M100 can successfully complete all lengthwise cutting processing procedures with an incredibly high ...
Alignment of the fabric webs, dimensioning, cross cutting, edge trimming, labelling, hemming, sewing, stacking. The cross cutting cross hemming M400 takes over the complete processing procedure with an extraordinary performance, uncompromising ...
The panel cutter machine is used for cutting panels directly from fabric rolls. The process consists of: edge guiding, length cutting (optional), dimensioning, cross cutting and stacking. All home textile flexible materials (flat sheets, ...
Cutting speed: 32 m/min
Overall length: 420 mm
Overall width: 110 mm
The START International TBC50 Heavy-Duty Non-Adhesive Material Cutter automatically dispenses, measures, and cuts non-adhesive materials. It's ideal for heavy production to cut all kinds of tubing, sleeving, Nomex, Velcro, ribbon, etc. ...
Cutting speed: 32,000 mm/min
Overall length: 42 cm
Overall width: 32 cm
The START International TBC50S Heavy-Duty Printed Label Cutter automatically dispenses, measures, and cuts printed labels (fabric, plastic, metal, etc.) using a high precision photosensor. It's ideal for heavy production to cut all kinds ...
The START International TBC55SK Heavy-Duty Printed Label Cutter automatically dispenses, measures, cuts, and stacks printed labels (fabric, plastic, metal, etc.) using a high-precision photosensor with stacker. It's ideal for heavy production ...
Pressing force: 280, 400 kN
Plate thickness: 12.7 mm
Tool change time: 15 s
All ECCO Line machines are equiped with 28 t punching pressure (40 t on request) and Trumpf Tooling system. All models are equiped with: - constant punching pressure - maintenance free hydraulic drive - one stripper holder an plate - ...
Pressing force: 280 kN
Engine power: 15 kW
X travel: 4,020 mm
• Machine could be equipped with Laser as a CombiLaser machine • Independent drive of Y-axis • Laser safety through safety cover • 1 kW, 2 kW and 4 kW available • Including suction unit BG-Cut produce depending on automatic ...
Machine for cutting and opening greige tubular fabrics coming from circular looms Inlet From fold or cradle (optional). Sintered circular blade The cutting take place on the fold of the fabric by a circular blade, with adjustable ...
Bianco
Machine for cutting and opening greige tubular fabrics coming from trolley or small roll Upside down basket This machine allows to process fabrics coming from the trolley, overall reduction of the machine dimension and less tension ...
Bianco
Machine for cutting and opening the tubular knit fabrics, designed for work in automatic way at high speed operation Detwister Made in stainless steel, guarantees excellent untwisting of the fabric rope without creating elongation. Spreading ...
Bianco
Force: 10 tf - 200 tf
Stroke: 150 mm - 500 mm
For all repair and assembly jobs. According to European standards, all Yale workshop presses can be used without any additional protection devices as the piston speed is below 10 mm/s. For special applications additional safety equipment ...
Manual hank cutter machine Manually operated guillotine for cutting fibre hanks at the required length. HIGHLIGHTS Compact Simple construcion Ergonomic Easely adjustable TECHNICAL DATA Hank wrapping - Paper, plastic, ...
Pneumatic hank cutter machine Pneumatic hank cutter to cut hanks of synthetic filaments into bundles. Mechanical adjustment of bundle length, manual feeding of the hank, pneumatically actuated cutting movement of the knife. Available ...
Cutting speed: 1,800,000 mm/min
Overall length: 4,400 mm
Overall width: 2,000 mm
Equipment introduction Using diamond wires to form a wire net which is controlled by servo synchronous motor to realize high speed cutting, this equipment meets national advanced standard. Equipment function: 50-70μm Superfine ...
Qingdao Gaoce Technology Co., Ltd.
Tube diameter: 200 mm - 300 mm
Cutting speed: 0 m/s - 30 m/s
Overall length: 5,200 mm
This equipment is used for machining Mono-silicon bars. Cropping and sampling the hard and brittle materials through electroplated diamond wire with feeding process. It is a reliable, high-efficient and high precision equipment. Equipment ...
Qingdao Gaoce Technology Co., Ltd.
Cutting speed: 0 m/s - 25 m/s
Overall length: 4,600 mm
Overall width: 2,300 mm
Equipment introduction: Poly510P cropper is machining equipment for cutting silicon with diamond wire and it is widely used for machining of poly-silicon materials. Cutting and trimming the silicon bar through a reciprocating wire ...
Qingdao Gaoce Technology Co., Ltd.
The new XPR300™ represents the most significant advance in mechanized plasma cutting technology, ever. This next generation system redefines what plasma can do by expanding its capabilities and opportunities in ways never before possible. ...
Hypertherm, Inc.
An array of technology that guarantees high performance and process efficiency. A highly flexible, productive and automatic system that ensures the most efficient material management, processing nests without holding scrap and reducing ...
durma L Angle series nas Deen designed to De a time saver. Less installation time, less adjustment duration and less tooicnanging process, on l profiles; marking (laDeiing), puncning and cutting can De performed automatically without ...
IW Combined Shear "Efficient, Reliable and Precise" is what describes the DURMA IW Series Combined Shears best! Designed with multiple functionalities in mind, Durma Combined Shears have defined the industry standard for reliability, ...
Motor power: 3 kW
Weight: 210 kg
Max size 110mm Straight or angle Tube notching or round or rectangular tubes up to 110mm. MBL are strong tube notching machines that make tubes junction easy whenever welding or joining tubes together is needed. Notching round ...
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining