The IMP™, which can be equipped with 1 ...
Go Ahead. Get Tough.
Eastman's Static Cutting Table System is capable of cutting, marking, drilling and punching virtually any flexible material at speeds of up to 60 inches per second (152.4cm/s). The static table has proven itself as the go-to resource for materials like cotton, nylon and vinyl as well as difficult-to-cut ...
Precise system operations, driven by state-of-the-art motion control communications combine to offer an industry-leading solution for medium- to high-ply cutting of flexible ...
Model: RS2
The Rubber Slitter is designed to cut very dense rubber and plastic sheeting.
Model ...
IS900
IDEAL FOR:
-Medium to large engraving & cutting
-Non-flat surfaces
-Signage, front panels & matrix applications
-Intelligent: iQ+
The IS900 combines Gravograph engraving and build quality with ground-breaking ...
IS 6000XP / 7000XP / 8000XP
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
- Engraving area: IS6000XP 610x410mm (24x16")
- Engraving area: IS7000XP 610x815mm (24x32")
- ...
IS6/7/8000
Three machines for engraving or machining up to 24 x 48 in (610 x 1220 mm). Numerous options to meet the needs of professionals in the areas of engraving, cutting, and machining.
-Engraving area :
IS6000 = 24 x 16 (610 x 410mm)
...
The TK 804/3 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload profiles.
The machine comprises a multi-spindle combined unit, ...
The TK 804/2 model features an automatic cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload ...
The TK 804/1 model features an automatic machining and cutting system for aluminum profiles and it is designed to minimize the manual intervention of the operator during the machining cycle, allowing the operator only to load/unload profiles.
The machining line can be equipped with optional systems that, in addition to common cutting processes, perform also drilling/milling ...
MECACUT
Multi technologies equipments
3 technologies for only one investment
Cutting equipment - multi technologies :
Optimized system for fast cutting of light materials in the POP and packaging ...
Combined lines are the ideal solution for average production rates as they allow to cut blanks or slit coils in one single installation, that is, they can be used as cut-to-length or slitting lines in accordance with the user's needs.
For widths ...
Cutting line for cutting flat rectangular blanks from main coils. For widths of up to 3000 mm, thicknesses of up to 25 mm and speeds of up to 150 m/min.
The ...
Cutting line for cutting flat rectangular blanks from main coils. For widths of up to 3000 mm, thicknesses of up to 25 mm and speeds of up to 150 m/min.
The ...
When it comes to versatility, precision, reliability and production speed, our slitters are second to none.
In a typical canbody production line, ...
When it comes to versatility, precision, reliability and production speed, our slitters are second to none.
In a typical canbody production line, ...
When it comes to versatility, precision, reliability and production speed, our slitters are second to none.
In a typical canbody production line, ...
The GERBERcutter® Z1 is the next generation computer-controlled, automated cutting system and the optimal ...
SP Series Pen Plotters
The SP series of pen plotters plot on and cut pattern board (card), plastic or paper up to 0.5 mm (0.02 in) at speeds up to 300 mm/second (12 ips).
Specially ...
The GERBERcutter® GTxL is a low-ply conveyorized
system capable of cutting up to 2.5 ...
Application:
Cut-off saw for lab cutting of plastics, non-ferrous metals, steel, glass, ceramic, ...
Application:
Separating saw for lab cutting of plastics, non-ferrous metals, steel, glass, ...
Application:
Cut-off saw for lab cutting of plastics, non-ferrous metals, steel, glass, ceramic, ...
The JacketStrip 8310 axially and radially slits the insulation ...
The JacketStrip 8400 automatically strips jackets or insulation from thin round ...
Automatic and semi-automatic machines for high precision cutting of ...
The leading manufacturer of standard and custom made, automated die cutting equipment. The four post hydraulic press is our standard flat bed die cutting system and is available in a variety of platen sizes. Variations on the base press design include ...
Automated Optical Registration Flat Bed Die Cutting Systems
Preco's automated die cutting presses are four post ...
Preco's Rotary Converting Platform and its lower operating costs make you competitive on high-volume jobs. Our multilayer construction systems can die cut, laser cut, ...
Production made profitable.
Zünd G3 eliminates the bottlenecks in your finishing department by automating all cutting/trimming functions. Manual cutting, with all inherent costs, potential for mistakes, and lack of efficiency, is reduced to an absolute minimum. With optimized workflow, G3 further boosts productivity.
Versatility and longevity.
No other cutting ...
A Zünd digital cutting system increases productivity and profitability, short term and long term. Maintaining close, on-going contact with endusers allows Zünd to respond quickly and effectively to customer demands for new capabilities.
Made-to-Order ...
S3 - fast, efficient, ready for the future
Zünd cutting systems are well known for being modular. The super-fast S3 line of cutters is no different - it can ...
