|
|
| Products 91 to 120 of 168 |
DZ 266: Signal Converter Frequency to Analogue and Frequency to Serial RS232
Multifunctional converter module with fast response time and many programmable features for conversion of frequencies to voltage, to current or to serial data format
Scalable LCD display for indication of the actual input frequency and the operating state
Universal impulse imputs for use with single channel signals (A only),
quadrature signals (A, B, 2x90°) or differential TTL / RS422 signals
A, /A, B, /B
Analogue outputs +/- 10 V (polarity represents direction of rotation) and
0/4 – 20 mA, resolution 14 bits
Wide operationg range: 0,1 Hz bis 1 MHz
Setup by means of the front keys and LCD menu, or by PC
Serial RS232 interface
Power supply 24 VDC, auxiliary output +5V for supply of TTL encoders
DIN rail mounting
|
|
|
Delta carries a variety of signal conversion peripherals. Signal conversion peripherals are used to match the signal levels and signal types between components in your motion system. For example, you can convert a voltage drive output to a current drive output in order to control a servo valve. While these products have been designed to satisfy requirements of Delta motion control products, they can be used in any system.
|
|
Reliable and precise, the ME520 and ME52C passed successfully all the tests, from the agro-alimentary processes to the car industries, aeronautical and petrochemical.
The modules of measurement ME520 and ME52C propose a very complete electronic allowing the measurement of all types of sensors or signals, the conditioning of sensor as well as the conversion of many signals.
Modules ME520 are very easy to use. A notch of calibration makes possible to regulate the analogical exit using a potentiometer multi turns.
Modules ME52C, are calibrated in our laboratories, no adjustment is not to be made. The values of entries and exits are fixed and can be adjusted on request.
|
|
Technical Datas Smart-Transmitter MSK 200
MSK 200, MSK 200-T
Smart-2-wire-supply unit in DuoTech Failsafe Technology
Option:
"iExa" Input EExia IIC
"AK4" Certified according to DIN 19250, class 4
|
|
Signal converters are the ideal interface solution for Class I, Div. 2 and Intrinsic Safety applications - more compact and easier to wire, install, and configure than other methods.
These DIN-rail mounted PLC and I/O system signal conditioners isolate, amplify, filter signals from harsh industrial interferences enhancing the overall reliability of the system.
|
|
- Transfer Data with accuracy, reliability and simplicity using our new uDockTM Model U2CI through the instrument's IR port
- Easy to install software from CD or www.myronl.com
- The uDock application will operate on Windows XP and Vista*; and Macintosh OS9.2 and OSX**
- Automatic organization of data (record number, type of measurement, value and unit measurement, solution, temperature, date stamp, and time).
- Exports to Office software (Word*, Excel*, Works*...etc) using universal formatting (.CSV) files
- Control your Ultrameter IITM and PoolProTM time and date setting though our uDock software.
- Clear instrument memory through our uDock software
- Self powered by USB portor eve
|
|
eNod 3 : Digital measurement power 3 !
· 24 bits conversion, up to 1 600 meas./s.
· Digital filters
· RS485/232 and CANBus outputs, MODBus-RTU and CANOpen
ENod3 offers a low-cost and powerful solution to convert any strain-gauge sensor into an intelligent digital system:
- Digital high speed transmitter
- Dynamic weighing controller (Checkweigher)
- Peak value detection
Control the power of numerical filtering with eNodView freeware:
· Complete eNod setting up
· Measurement acquisition and displaying
· Signal analysis
· Digital filters simulation
|
|
The iT Transmitter is a signal conditioning module that interfaces with a traditional IEPE accelerometer to provide a 4-20 mA output signal and a buffered dynamic signal. This allows the user to interface an accelerometer with a PLC/DCS system for condition trending, while still providing a dynamic output for more extensive vibration analysis through the BNC connector on the front of the module. The iT Transmitter is ordered with custom settings to meet user-specific requirements.
With unique high- and low-pass filters - and a host of options for customizing the transmitter to your specific needs. By utilizing your existing sensor infrastructure, Wilcoxon's Total Lower Cost (TLC) Approach reduces the expense of online monitoring.
|
|
PRODUCT RANGE GENERAL PRESENTATION
The electronic allows the vibration of the viscometer and processes the amplitude variations in order to deliver a linear viscosity response.
960X range
• Viscosity and temperature processor
• Density for kinematic viscosity measure (optional)
• Flush-type mounting
• 24 keys keyboard and graphic display
• User friendly utilisation
• Analogic current outputs 4-20mA, relays, RS 232 - RS 485
800x RANGE
• Viscosity controller
• Maximal process temperature 200°C or 300°C
• Flush-type mounting
• Analog output 4-20 mA
• RS 485 output
• Output relay (switching power 2A - 250VAC)
7000 RANGE
• Viscosity and temperature transmitter
• Maximal process temperature 100°C
• Mounting on standard DIN rail
• Analog output 4-20 mA
• RS 485 output
|
|
VisConnect 4-20 mA Analog Output Module
VisConnect is a stand-alone, analog/digital output hub that provides access to ViSmart-delivered data via a standard 4-20 mA output signal, allowing customers to acquire multiple channels of continuous viscosity and temperature data and integrate that data into any host control platform, without the use of expensive instrumentation.
The VisConnect has two loop-powered, galvanically isolated channels of 4-20 mA output, allowing customers to configure the minimum and maximum analog outputs to correlate to 4 mA and 20 mA, or optional 0.5V to 4.5V, respectively. With an optional 2 channel analog voltage output, standard communications protocol for industrial applications, the VisConnect can connect to any legacy DAQ or host control system. An RS232 Serial communication interface is present, and an optional CAN interface will be made available in the future.
|
|
|
|
|
|
TELIS reinvent measure conversion and transmission
It’s graphic screen display, and it’s joystick make user-frendly and easily programmable device.
It’s USB front face plug enable a very simple programmation with PC.
It’s cutting edge technology allows TELIS to have exceptional caracteristics.
It’s input and output configurations, fitted to market, allow to give solutions to all applications.
It’s double current input design allows TELIS to become a double transmitter in one device.
TELIS is designed in JM concept case unplugable from its DIN RAIL wiring base
TELIS is able to reduce it’s consumption up to 50% and contribute to energy saving and environment protection.
TELIS can be used as one input configuration transmitter, or two inputs configuration transmitter.
- In case of one input configuration, TELIS is a transmitter allowing all input type and sensor power supply.
- In case of two input configuration, TELIS can use it’s calculation function or become a double transmitter; in this case TELIS becomes a double transmitter in one device.
Whatever input configuration is used, TELIS offers 1, 2 current or/and tension output, 1, 2, 3, 4 relay outputs.
TELIS has also a RS485 modbus, jbus digital output and an USB front face plug allowing a very simple programmation with PC.The free sofware SETLINE enables a very simple product configuration, and to save configurations, etc.…
TELIS is designed in 22.5mm or in 45mm width case, with or without graphic screen display, and joystick, according to references
|
|
In the process control and automation field, often the need arises of interfacing low level signals generated by thermocouple, Pt-100, load cell, current and voltage transducers, LVDT etc.. to the process controllers, PLC, DCS etc.. Also, one signal needs to be fed to the multiple control device. To take care of common ground loop of many sensors to single system and also avoid loading effect, isolation of these signal from one another is must. The models featured here provides optical and/or galvanic isolation between input and output, maintaining the desired level of accuracy and linearity.
APPLICATIONS
For conversion and isolation of low level dc signals to (4-20)mA signal for interfacing to PLC, SCADA, DCS etc..
|
|
|
A full range of signal converters and isolators to meet every process application. The high end allow flow, pressure, and level calculations. Simple loop powered isolators are also available.
|
|
|
|
|
|
General description :
The HA-2556 is a monolithic, high speed, four quadrant, analog multiplier constructed in the Intersil Dielectrically Isolated High Frequency Process. The voltage output simplifies many designs by eliminating the current-to-voltage conversion stage required for current output multipliers. The HA-2556 provides a 450V/µs slew rate and maintains 52MHz and 57MHz bandwidths for the X and Y channels respectively, making it an ideal part for use in video systems.
The suitability for precision video applications is demonstrated further by the Y-Channel 0.1dB gain flatness to 5.0MHz, 1.5% multiplication error, -50dB feedthrough and differential inputs with 8µA bias current. The HA-2556 also has low differential gain (0.1%) and phase (0.1°) errors.
The HA-2556 is well suited for AGC circuits as well as mixer applications for sonar, radar, and medical imaging equipment. The HA-2556 is not limited to multiplication applications only; frequency doubling, power detection, as well as many other configurations are possible.
|
|
Passive Mixers
Extend the reach of your base stations with Peregrine integrated receive mixers. High linearity and remarkable input IP3 performance will pick distant signals out of the haze. Integrated matching RF and LO networks and the tiny TSSOP package eliminate the need for bulky mixer modules or external RF baluns.
|
|
|
Analog Devices' Mixers and Multipliers have the high performance specs such as speed and dynamic range - as well as higher levels of integrated functionality - that enable new, highly desirable architectural changes to radio designs, that, in turn, will reduce component count, reduce cost, and ease design.
|
|
|
The CSA42L51 delivers excellent audio performance while providing portable device developers with an innovative solution that maximizes battery life while minimizing end product form factors
|
|
The flagship CS3318 is an eight-channel, high-voltage, digitally controlled analog volume control IC that is the benchmark for audio quality, showcasing 127 dB dynamic range.
The CS3318 operates from a ±9 V power supply, with 118 dB adjustable range from +22dB to -96dB, negligible distortion and inter-channel isolation. Plus, a 0.25 dB step size with zero-crossing detection and programmable time out ensures remarkably smooth control of volume adjustment. The CS3308 is a pin-compatible ±5 V version with a very high dynamic range of 123 dB.
|
|
Suitable for J and K thermocouple
IN / OUT / supply galvanic isolation
8 programmable temperature ranges
3 programmable output ranges
Simple programming, self calibrating
Availabe version with 24-240 Vac/dc supply voltage
|
|
M3LU universal and configurable converter
- Universal converter configurable by DIP switch and key in front display without needing a PC computer or an Hand Held Communicator,
- Configuration PC software in option,
- 4 wires technology - 9-36Vdc or 85-264Vac 50/60Hz external power supply,
- Universal input : current (0-20mA), voltage (-10 to +10Vcc), thermocouple (K, E, J, T, B, R, S, C, N, U, L, P), resistance bulbs (Pt100/1000, Ni100/120, Ni508,4, Ni-Fe604, Cu10) or potentiometer (0-4000O),
- Universal output : current (0-20mA) or voltage (-10 to 10Vcc),
- Burnout function (mini./maxi. of scale),
- Input/output isolation: 1500Vca,
- DIN mounting.
|
|
|
|
|
|
In the area of suppression modules for contactors, valves and motors, we offer the corresponding components to increase EMC throughout the whole installation. We can meet all normal requirements in the field of power supplies with our power supply units, incorporating primary switching technology and control-power transformers.
Interface technology is represented in the Lutze programme by a wide range of different components that can be used to create just about any interface needed in your application.
Lütze Microkon Signal Conditioner and Converter Series: With fixed input/output or with 9 adjustable ranges; High accuracy (0.1%); Space-saving Microcompact 6.2 mm design.
Lütze Universal Analogue Signal Converter: With 48 selectable ranges; With 3-way isolation and wide-range input 24 to 240 V AC/DC; Space-saving Microcompact 17.5 mm design; 2- and 3-way separation.
Lütze PT 100 Temperature Converter: With and without galvanic isolation; High accuracy (0.3%); Space-saving Microcompact 6.2mm design; Freely adjustable operating points.
|
|
Sensor signal amplifier MTI04CS/ MTI04CQ
With the MTI04CS/CQ, MAZeT now presents the second-generation multi-channel transimpedance amplifier. The MTI04CS/CQ now offers the ability to adapt the compensation of the transimpedance amplifier) to the input capacitance of the sensors, such as photodiodes. This is done digitally in two stages, 5 and 80pF.
Programming of the transimpedance gain is carried out via three input pins to any of eight levels; and takes effect for all channels simultaneously.
Additional technical characteristics
- Switchable frequency response compensation for input photodiodes (< 5pF and < 80pF)
- Good synchronization of the amplification and the temperature coefficients by the transfer function
- Settable power-save mode
- Supply voltage from 2.7 to 5.5V
- Extended temperature range from -40 to +125°C
IC Types
* MTI04CD – ‘naked’ chip (die)
* MTI04CS – 16-pin SOP16 package
* MTI04CQ – 16-pin QSOP16 package
|
|
Features
* 0.15 um MHEMT Technology
* Frequency Range; 30 KHz to > 40 GHz
* 235 O Transimpedance
* Average Input Eq. Noise: 15 pA / √ Hz
* Single Supply Operation: +5V @ 27 mA
* Chip Size: 0.85 x 0.85 mm
Typical Applications
* OC768 Fiber-Optic System
|
|
Vitesse’s high-performance transimpedance amplifiers (TIAs) support a wide variety of optical communication network protocols, including 1 GbE and 10 GbE, SONET/SDH, Fibre Channel, and InfiniBand. Available in a variety of data rates and differential transimpedances, these devices feature a linear current monitor to add diagnostic capabilities and to simplify optical alignment during the manufacturing process.
Wide Range of Support
- Ideal for the low-power requirements of SFF, SFP, SFP+, XFP, and other applications
- Available in a variety of data rates and differential transimpedance levels
- Support for both bare die and TO-46 packages
- Means for adjusting bandwidth to meet multiple GbE, Fibre Channel, and Infiniband standards (VSC7977-01)
|
|
When test needs call for higher power and higher frequency, consider our "T" Series microwave amplifier line- 0.8 to 45 GHz, 10 to 16,000 watts CW and Pulse. These amplifiers provide coverage for a wider range of high-power microwave test applications than any other brand of microwave amplifier on the market and are incredibly feature-rich.
They also offer an advanced design and highest quality construction of any TWT amplifier on the market.
|
|
General description :
The number and variety of video products on the market continue to expand. Even with the expansion of HDTV and high resolution RGB signals, the most common point-to-point connection for a video signal is analog. Intersil video ICs provide many solutions for moving these signals around. Whether it is transmitting RGB down CAT-5 or switching 32 security video feeds, Intersil has a solution. From high performance video amplifiers to differential line equalizers, Intersil's family of video products can address any portion of the analog signal chain.
|
|
|
MSK offers a broad range of high performance video amplifier products. These amplifiers have high voltage capability, very high slew rates and, in some cases, high output current for use in Piezo Electric drives, electrostatic or electro-magnetic deflection and CRT cathode drives.
|
|
|
Maxim offers innovative video ICs including video amplifiers, reconstruction filters, muxes, switches, and on-screen display (OSD) generators.
|
|
The AD725 is a very low cost general purpose RGB to NTSC/ PAL encoder that converts red, green and blue color component signals into their corresponding luminance (baseband amplitude) and chrominance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. These two outputs are also combined on-chip to provide a composite video output. All three outputs are available separately at voltages of twice the standard signal levels as required for driving 75 ohm, reverse-terminated cables.
|
|
|
|
Amplifiers, Analog filters, Digital filters, Signal converters
