|
|
LPF4-LL/x
Features :
- DSL Splitter
- For POTS (COMBO)
- For Iskra LL or KRONE LSA Strip
- For 4 Channels, Compact
-With Overvoltage Protection
ProductSummary :
The low pass industrial filter (LPF) - ADSL splitter - is intended for installation on the main distribution frame (MDF)
of a professional telephone exchange.There are 4ADSLsplitters included in the compact casing.The connector manufacturers professional plug is
designated for a use in conjunction with the 10-pair "Krone" strip or 10-pair "Iskra" strip. It is also fitted with
overvoltage protection and thermo-clip for protection against fire on equipment in professional case of contact with
power lines.
TheADSLsplitter is universally designed according to AnnexA(POTS) with impedance line 600 Ohms |
|
Order Code K109UI:
- Power supply supplier: 19,2..30 Vdc
- Input: Nr 1 channel, voltage (0..10 / 10..0 / 0..5 / 1..5 / 0..15 / 0..30 V) and current (0..20 / 4..20 mA)
- Output: Nr 1 channel, voltage (0..10 / 2..10 / 0..5 / 1..5 V) and current (4..20 / 20..4 / 0..20 / 20..0 mA)
- Isolation: 1,5 kV (50 Hz, 1 min)
- Dimensions (w x h x d): 93,1x102,5x6,2 mm
|
|
Order Code K109LV:
- Power supply supplier: 19,2..30 Vdc
- Input: Nr 1 channel, voltage (±25 mV up to ±2.000 mV)
- Output: Nr 1 channel, current (0/4..20 20..0/4 mA) or voltage (0..10 / 10..0 / 0..5 / 1..5 V)
- Isolation: 1,5 kV (50 Hz, 1 min)
- Dimensions (w x h x d): 93,1x102,5x6,2 mm
|
|
As the world's leading supplier of data converters, Analog Devices enables new system architectures with analog to digital converters (ADCs) that deliver breakthrough combinations of performance and function. Analog Devices' ADCs are unmatched in their ability to deliver the low power, small footprint, and low cost requirements today's systems demand. ADI's A/D converters provide superior value for high-volume applications in cost-sensitive markets.
|
|
Linear Technology offers a complete family of high performance analog to digital converters (ADCs), including 16-bit to 24-bit delta-sigma converters for precision measurements, up to 16-bit high-speed pipeline for communications and 8-bit to 16-bit low power successive approximation (SAR) ADCs for everything in between.
|
|
| We offer a very wide range of high-performance data converters. Our A/D and D/A converters (ADCs and DACs) have resolutions from 6 bits to 18 bits and sampling rates from DC to 2.3Gsps. |
|
A/D Converters
5102ALP A/D Industrial converter, 16-bit, 20kHz, Single Event Latchup-protected
7672 A/D Converter, 12-bit, 5us conversion time
7805ALP A/D Converter, 16-bit, Parallel, Single Event Latchup-protected
7809LP A/D Converter, 16-bit, Serial, Single Event Latchup-protected
7820 A/D Converter, 8-bit, 1.36us conversion time
7872 A/D Converter, 14-bit, 10us conversion time
9042 A/D Converter, 12-bit, 41 MSPS
9240LP A/D Converter, 14-bit, 10Mhz, Single Event Latchup-protected
D/A Converters
5675RP D/A Converter, 14-bit, 400 MSPS
7545A D/A Converter, 12-bit, Buffered Multiplying
7846A D/A Converter, 16-bit
8143 D/A Converter, 12-bit, Serial Daisy Chain
8408 D/A Converter, Quad 8-bit Multiplying CMOS
|
|
| National's Powerwise Analog-to-Digital Converters (ADCs) are the lowest power family of A/D converters on the market. In addition to providing extremely low power consumption over a range of sample rates, each ADC has a very efficient power down feature. For example, a single channel 1Msps PowerWise ADC used in a 10 Ksps application has a typical power consumption of 0.02 mW at 3V. |
|
| RAD004 enables 6-bit analog to digital conversion from DC to GHz signals. It has been optimized for ultra-high speed applications with its 4 GS/s operating frequency. The professional encoder has high immunity to errors that could cause the generation of sparkles in the output. There are two input clocks: CLK1 and CLK2, which are used by the track and hold professional amplifier, and CLKI which is an option to be used at the professional decoder. The RAD004 also includes a pseudo random number professional generator (PRN) for testing purposes. |
|
Epson audio solutions offer a wide range of applications such as speech enabled portable devices, assistive applications for visually / speech impaired persons, educational toys, mobile handsets (ring tones and music playback) portable music players, automotive audio systems and automotive navigation systems.
Voice synthesis IC product corresponding to several languages that can be voice conversions.
Seiko Epson Corporation ("Epson") today announced it has developed a new synthesis chip for embedded applications featuring Fonix text-to-speech (TTS). The S1V30120 is a companion chip that converts text-based characters into a synthetic speech signal, which is output via the integrated D/A professional converter. Since it uses a message protocol based on a clock-synchronous serial interface, the chip can be easily integrated with a wide range of host devices and microcontrollers.
The S1V30120 also supports decoding of ADPCM data, which allows mixtures of pre-recorded speech and synthetic speech to be combined as required. (For example, fixed phrases could be implemented using pre-recorded signals, while variable phrases would be synthesized.)
Target applications include a wide range of systems that require voice guidance such as those embedded in home appliances, buildings, and office/industrial equipment. |
|
| Maxim provides a wide range of anti-aliasing and post-DAC professional filters that improve system performance for frequencies up to 300kHz and complement Maxim's ADC and DAC product lines. |
|
This FM rejector professional filter is used to filter out unwanted excessive FM frequencies in your OATS, or other EMC testing facilities.
These frequencies can interfere with your test set-up, spectrum analyser bandwidth etc.
Caution should be used if your products emissions are in this filter's frequency range as it will reject them as well.
|
|
| The QTouch™ devices are charging a sense electrode of unknown capacitance to a known potential. The electrode is typically a copper area on a printed circuit board. The resulting charge is transferred into a measurement circuit. By measuring the charge after one or more charge-and-transfer cycles, the capacitance of the sense plate can be determined. |
|
| The ADV202 is a complete compression/decompression PROFESSIONAL CODEC that is fully compliant to the JPEG2000 standard and is the only device in the market today that is capable of compressing and de-compressing both SD and HDTV video in real-time. Targeted at both still image compression and high-resolution video, the ADV202 performs the computationally intensive operations necessary to perform this new standard in a single chip. |
|
| Monostable or latchable outputs. Ideal complement for AUREL data receivers and four channels industrial transmitters with UM3750 professional encoder. Ideal for applications where more than once coded control is requested. |
|
Features:
- Complete PROFESSIONAL CODEC and filtering system including:
- Transmit high-pass and low-pass filtering
- Receive low-pass filter with sin x/x correction
- Active RC noise professional filters
- µ-law or A-law compatible COder and Professional decoder
- Internal precision voltage reference
- Serial I/O interface
- Internal auto-zero circuitry
- Receive push-pull industrial power amplifiers
- µ-law-TP3064
- A-law-TP3067
- Designed for D3/D4 and CCITT applications
- ±5V operation
- Low operating power-typically 70 mW
- Power-down standby mode-typically 3 mW
- Automatic power-down
- TTL or CMOS compatible digital interfaces
- Maximizes line interface card circuit density |
|
| The RDS010 is a high performance direct digital frequency professional synthesizer (DDFS) with an operating frequency of 900 MHz. The RDS010 has been optimized for high-speed applications, achieving more than 60dB SFDR at 900 MHz reference clock. The integrated DAC outputs are internally terminated with 50Ohm resistors for better dynamic performance. |
|
JUMO dTRANS T02 Ex Programmable 4-wire professional transmitter (70.7025/95.6525)
The JUMO dTRANS T02 Ex transmitter incorporate a microprocessor for digital signal processing.
Input and output are electrically isolated. It can be mounted on a DIN rail, the electrical connection is by screw terminals for stranded or solid wire up to 2.5mm² conductor cross-section.
The 0/4 - 20mA or 0/2 - 10V output signal is available either linearized (linear with temperature) or inverted (option). The transmitter can be programmed via the PC setup program, which is supplied as an accessory.
Current and voltage outputs are available directly on terminals. No hardware alterations are required.
|
|
Prescalers
The high-performance UltraCMOS™ RF Prescaler family offers a fixed divide ratio of 2, 4, or 8 and an operating frequency ranging from DC to 3.5 GHz on a nominal 3 V supply while drawing only 12 mA. Packaged in small 8-lead TSSOP, 8-lead MSOP, or 6-lead SC70, these devices are ideal for microwave PLL synthesis solutions. |
|
| The Blancett Frequency-to-Current (F-to-I) and Frequency-to-Voltage (F-to-V) converters are microprocessor-based devices designed to provide an analog output directly from a Blancett turbine flow meter. The converters measure and calculate the flow rate of a turbine flow meter and produce an analog output representative of that flow rate, in the form of a 4-20 mA or 0-5 VDC signal. |
|
This 30MHz professional filter is recommended for any radiated emissions testing.
The High Pass filter will filter out all frequencies below 30MHz which are in the ambient noise during the pre-compliance or compliance testing.
Radiated signals below 30MHz can be high in magnitude, and can interfere with your testing or spectrum analyzer.
By putting an RF700 in front of your spectrum professional analyzer's RF input, you will be assured cleaner test results.
|
|
These expansion modules fits into the integrated ac servo motors MAC50, MAC95, MAC140, MAC141 and MAC750 to adapt the motor to a specific application. This is a cost-saving approach as you only pay for what you need.
The unique module concept:
There are now modules for:
• Profibus-DP
• CANopen DS301/402
• Devicenet
• Nano PLC SUPPLIERS
• High speed 230kbit serial
RS485
•Wireless Bluetooth and WLAN
With D-sub industrial connectors, manufacturers of cable glands or M12 connectors.
Modules can also be developed to customer specifications. |
|
|
|
Amplifiers, Analog filters, Digital filters, Signal converters
