|
|
Track Loader
As the next generation of Mustang loaders, the track loaders carry on a strong tradition. With the addition of the MTL312, MTL316, MTL320 and MTL325 track loaders, Mustang has a complete offering to handle any job. Track loaders have become a new favorite on muddy, off-the-road job sites because of their ability to keep ground pressure to a minimum while moving dirt with the same force as a wheeled loader. Mustang's models are comfortable to operate and reliable to own. They are sure to make headlines among Mustang dealers and customers.
|
|
|
|
|
|
UNIQUE RUBBER TRACK UNDERCARRIAGE DELIVERS LOW GROUND PRESSURE SO YOU CAN WORK ON SENSITIVE SURFACE AND IN SOFT UNDERFOOT CONDITIONS
SPACIOUS,DELUXE SEALED CAB FOR YOUR OPTION
AN AIR RIDE SEAT KEEP YOU CONFORTABLE
WIDE RANGE OF OPERATING CAPACITIES AND ATTACHMENTS
80--100 DEUTZ ENGINE AND STRONG PERFORMANCE
TWO SPEED OPTION IS AVAILABLE FOR HIGHER TRAVEL SPEEDS
JOYSTICK WITH SHUTTLE VALVE CAN MAKE YOU DRIVE IT WITH SINGLE HAND
General Dimensions TS80
A-Height to top of ROPS: 2025mm
B-Ground clearance: 200mm
C-Max.lift height, at hinge pin: 2920mm
E-Length of undercarriage: 1938mm
F-Machine length, less bucket: 2676mm
G-Machine length, with bucket: 3385mm
H-Machine width: 1850mm
Track Specifications
I-Track width: 320mm
D-Length of track on ground: 1500mm
Machine Weight:
Weight,less bucket: 4000kg
Ground pressure: 37.9KPa
Ground contact area: 0.96u
Diesel Engine
Model:TS80 DEUTZ D226B-4G
Displacement: 4liter
Gross hoesepower2500rpm: 56kw
Torque(peak): 275Nm
Operating Specifications:
Tipping Load: 2400kg
Operating capacity:
SAE J818 rating, 35% tip lead 840kg
SAE J818 rating,50% tip load 1200kg
Travel speed:
Low 0--8km/h
High 0--16km/h
Control pattern(joystick): Hydraulic Control
Auxiliary Hydraulic Pump
Flow, maximum: 75Lpm
Pressure: 16MPa
|
|
|
|
|
|
Bobcat compact tracked loaders are the result of half a century's leadership in compact equipment and several years of evolution of the tracked loader concept. They are rugged, manœuverable and offer optimal power-to-weight ratio for working in the most demanding environments.
Bobcat tracked loaders offer more in terms of increased productivity and versatility thanks to a program of constant improvement. Have a look at the high performance undercarriage and the exclusive C-pattern rubber track. These machines designed for durability offer a smoother ride over rough terrain.
Even in the most extreme weather and soil conditions - from rain, mud and hard slopes to tender turf and hot conditions - no other piece of equipment can help you to do your job better, faster and smarter. Take advantage of the SmartFAN™ cooling system and optional high flow hydraulics.
Change attachments while sitting comfortably thanks to the Bob-Tach™ mounting system.
Operators deserve a safe, comfortable and quiet operating space ensured by the failsafe system monitoring, the Deluxe instrumentation and the Selectable Joystick Control (SJC).
Bobcat tracked loaders are backed up with service, parts and financing programs to keep them operational with minimum downtime.
Looking for more information about our wide range of Bobcat compact track loaders? Surf through the next webpages.
|
|
|
|
|
|
Crawler Skid Steer Loaders : CK35-1
The Komatsu CK25-1 and CK35-1 crawler skid steer loaders with vertical lift deliver the best of both worlds. They combine the compactness and manoeuvrability of the wheeled versions, with the exceptional weight distribution and traction of tracks. Moreover, the unique loader arm design improves performance in terms of lifting capacity and reach, making the machine perfect for operations like material handling.
Stability
Exceptional stability and traction force in all weather conditions and soil types.
Speed
Two speeds: one for maximum drawbar pull, the second for fast motion.
Performance
The unique loader arm design gives these machines greater maximum operating loads, handiness and safety.
Versatility
The optional Super Flow system enables the best use of any kind of attachment, widening the range of uses of the machines.
Comfort
A spacious operator environment, ergonomic controls and 360 visibility guarantee exceptional operator comfort.
Customization
The CK25-1 and CK35-1 offer several possibilities for customisation to get a 'made-to-measure' machine whatever your requirements.
|
|
Optimize your power and performance on rough terrain; soft, sandy surfaces; and wet, muddy conditions with the Bobcat compact track loader. Based on the design of Bobcat Company's popular skid-steer loaders, the compact track loader delivers the same high level of reliability, durability, ease of maintenance and dealer service and support, but with improved traction, flotation and riding comfort.
A tracked undercarriage gives Bobcat compact track loaders several advantages over skid-steer loaders equipped with tires only or over-the-tire tracks. Improved traction over mud, sand or other loose materials, for example, makes it easy to push heavier loads without getting stuck; while a smooth, lighter ride over all terrains eliminates downtime (no tires means no flats), minimizes soil disturbance and reduces the need for work site reclamation after the job is complete.
|
|
|
With compact dimensions and very small turning radius, our loaders are efficient in loading, levelling and handling. They can be used on all kinds of sites: in the construction industry, civil engineering, renovation work, landscaping, agriculture or even industry.
|
|
The Volvo Compact wheel loader family consists of 6 models; ranging from 4550 kg to 8330 kg in Operating weight, and 0.65 m3 to 2.5 m3 in Bucket capacity.
Volvo compact wheel loaders combine hi-tech and proven technical components in a way that fully complies with the requirements of modern construction practice, and which satisfies the strictest quality demands.
Whats more: These machines are produced and being operated with an utmost respect for our environment. The engines have low pollution figures and low noise emissions and as many machine parts as possible are recyclable.
|
|
Beaver 45
Servocomandata compact shovel to four drive wheels
Compact shovel from 32 KW/43,5 CV
Weight: 2700 2800 Kg
Characteristics
* Power: 32 KW/43,5 CV
* Height of drainage: 2860 milimeter
* Width and Ability Bucket: 1520 milimeter 360 lt
* Distance of drainage to 45: 590 milimeter
* Operating cargo: 750 Kg
* All up weight: 2700 2800 Kg
|
|
Hitachi's wheel loaders give you safe, easy operation so that even beginners can work like veteran operators. These user and environmentally friendly machines give you the productivity you need to get the job done.
|
|
W50TC/W60TC/ W70TC/W80TC/
Net flywheel power 40 kW - 54 hp,
44 kW - 59 hp,
45 kW - 60 hp,
56 kW - 75 hp
Maximum operating weight 4.800 kg, 5.050 kg, 5.550 kg, 5.900 kg
Bucket capacity 0.65 - 0.80 m,
0.80 - 0.90 m,
0.90 - 1.00 m,
1.00 - 1.20 m
|
|
|
|
|
|
V3-5 /V4-5
YANMAR's Compact Wheel Loaders provide class leading lift capacities with uncommonly smooth hydraulic performance.
The user-friendly design for easy operation, versatility and durability work for the customers satisfaction.
We have 2 models, the V3-5 (operating weight 6,750lbs, canopy) and the V4-5 (operating weight 7,651lbs, canopy).
1. Automatic Mode - The machine will accelerate smoothly and change gear speed automatically.
2. Fixed Speed Mode - Machine speed is fixed at low speed mode irrespective of accelerator operation. Powerful, smooth job operation-a convenient mode for jobs in restricted areas.
3. Hydraulic Shuttle Shift - Convenient one lever F-R operation.
4. Auto-Leveler - A single lever operation places the bucket level on the ground, automatically. The bucket moves swiftly back to the scooping position after dumping. It makes everyone a skilled operator.
5. Rear Axle Oscillation - The driving force of the machine it transmitted securely in uneven terrain through the use of rear axle oscillation. It reduces operator fatigue and helps keep operation level.
|
|
Five models: 0.3 to 0.9m3 bucket capacities
The most compact body in its class (L4-2: min. turning radius-3,600mm), offering superb operation efficiency (L4-2: breakout force-2,800kgf & dumping height-2,155mm), comfort in the cabin (less noise, finger-tip operation lever, and better visibility) as well as the lowest gas emission, being compliant to current U.S., EU, and Japanese regulations.
|
|
Looks can be deceiving. So can names. Take Ditch Witch mini skid steers, for example. In stature, the SK350, SK500, and SK650 are relatively small. But everywhere else-power, performance, and versatility-they are absolutely huge.
SK350
The platform SK350 mini skid steer features a dual hydrostatic ground drive that gives it the same capabilities of larger machines.
SK500
The original Ditch Witch mini skid steer, the SK500 has the greatest dump height, dump angle, and hinge pin height in its class.
SK650
The biggest of the bunch, the SK650 mini skid steer has superior power and other best-in-class features.
|
|
Cummins engine, big power and low fuel consumption
high performance power train
Safety based design
Easy operation and quick couplers
variety of attachments for all applications
|
|
|
|
|
|
750 skid steer loader
Specification:
Engine
- Type: China/Japan Engine
- Rated Power (Kw) 44
- Rotating Speed (rpm) 2500
Noise
- In Cab(dB) <92
- Out of Cab(dB) <106
Hydraulic System
- Max Pressure (MPa) 14.2
- Cycle Time (s): Raise 3.5-4.5, Dump 2-2.5, Lower 3-3.5
Performance
- Operating Capacity(kg) 750
- Bucket Capacity (m3) 0.55
- Tipping Load(kg) 1900
- Bucket Break-out Force(Kg) 1700
- Max Lifting force(Kg) 1500
- Speed (Km/h) 0-11.2
- Operating weight (Kg) 3600
Tyre 12.0-16.5
Dimensions:
H1.Max.height (mm) 3900
H2.High to bucket hinge pin (mm) 2970
H3.Dump height (mm) 2200
H.Height to top of cab (mm) 2260
L.Overall length with bucket (mm) 3500
L1.Dump distance (mm) 640
L2.Overall length without bucket (mm) 2600
L3.Wheelbase (mm) 1050
L4.Rear axle centerline to back bumper (mm) 1050
B.Bucket width (mm) 2020
B1.Tread (mm) 1660
B2.Overall length to outside of tyre (mm) 1980
D.Ground clearance (mm) 210
R.Clearance circuit (mm) 2050
alpha1Dump angle at max height() 37
alpha2 Max attchment rollback when bucket on ground() 31
alpha3 Angle of departure() 20
|
|
|
|
|
|
RELIABILITY AND DURABILITY
All components are top quality and fully tested, running 24 hours a day, to simulate the toughest lifetime the machine could face.
SAFETY
ROPS/FOPS enclosure with seat belt as standard for real on-site protection.
Machine park-brake cannot be disengaged until the operators safety restraint is in place.
Optional self-leveling available for pallet work. 650 skid steer loader, 650 skid steer loaders, truck loader, free loader, side loader, used loader, swinger loader, motorcycle loader, boat loader, front loader washer, halo loader, leaf loader, used wheel loader, used skid loader, loader manual
Product Origin: China
Brand Name: Forway
Poduce Activity: 50PCS/Month
Certificate: CE, ISO9001, ISO14001
Supply Ability: 50PCS/Month
Certification(s): CE, ISO9001, ISO14001
Item
Engine Type Perkins 404D-22
Rated power(Kw) 35.7
Rotating Speed (rpm) 2600
Noise In Cab(dB) 90
Out of Cab(dB) 103
Hydraulic System :Max Pressure (Mpa) 25
Cycle Time (s) Raise Dump Lower
3.54.5 22.5 33.5
Performance Operating Capacity (kg) 550
Bucket Capacity (m3) 0.29
Tipping load (kg) 1100
Bucket Break-out Force (kg) 1500
Max Lifting force (kg) 1300
Speed (km/h)011.2
Operating weight (kg) 2800
Type 10.0 / 7515.3
Materials:Steel is thicker than that of ordinary ones, that would be more safty
Engine:Perkins Engine made in U.K./ Japan which can be easily maintained in any countries.
Spare parts:pumps, valves, motor pipes are sauer, American brand 3-6 moths for charge free
|
|
Product Origin: CHINA
BRAND NAME: FORWAY
PRODUCE ACTIVITY: 50PCS/MONTH
CERTIFICATE: CE, ISO9001, ISO14001
Supply Ability: 50PCS/MONTH
Certification(s): CE, ISO9001, ISO14001
Attachments: HYDRAULIC BREAKER, AUGER, BUCKET, SWEEPER, BACKHONES, INDUSTRIAL GRAPPLE, FORKS
Operating Capacity(kg): 950
Total length: 3626(mm)
Front and Rear Wheel Tread: 1050(mm)
Ground Clearance: 210(mm)
Hinge Pin Height: 2970(mm)
Dumping Height: 2200(mm)
Dumping Forward: 650(mm)
Front Tilt Angle: 31
Bucket Capacity (m 3): 0.48
Tipping Load(kg): 1900
Bucket Break-out Force(Kg): 2300
Max Lifting force(Kg): 2400
Speed(Km/h): 0---13
|
|
|
|
|
|
650 skid steer loader
Specification:
Engine
- Type: China/Japan Engine
- Rated Power (Kw) 36.8
- Rotating Speed (rpm) 2650
Noise
- In Cab(dB) <92
- Out of Cab(dB) <106
Hydraulic System
- Max Pressure (MPa) 14.2
- Cycle Time (s): Raise 3.5-4.5, Dump 2-2.5, Lower 3-3.5
Performance
- Operating Capacity(kg) 650
- Bucket Capacity (m3) 0.47
- Tipping Load(kg) 1700
- Bucket Break-out Force(Kg) 1500
- Max Lifting force(Kg) 1300
- Speed (Km/h) 0-11.2
- Operating weight (Kg) 2580
Tyre 10.0/75-15.3
Dimensions:
H1.Max.height (mm) 3970
H2.High to bucket hinge pin (mm) 2960
H3.Dump height (mm) 2150
H.Height to top of cab (mm) 2030
L.Overall length with bucket (mm) 3450
L1.Dump distance (mm) 750
L2.Overall length without bucket (mm) 2420
L3.Wheelbase (mm) 991
L4.Rear axle centerline to back bumper (mm) 1050
B.Bucket width (mm) 1680
B1.Tread (mm) 1460
B2.Overall length to outside of tyre (mm) 1710
D.Ground clearance (mm) 210
R.Clearance circuit (mm) 2090
alpha1Dump angle at max height() 37
alpha2 Max attchment rollback when bucket on ground() 31
alpha3 Angle of departure() 23
|
|
Product Origin: CHINA
BRAND NAME: FORWAY
PRODUCE ACTIVITY: 50PCS/MONTH
CERTIFICATE: CE, ISO9001, ISO14001
Supply Ability: 50PCS/MONTH
Certification(s): CE, ISO9001, ISO14001
Attachments: HYDRAULIC BREAKER, AUGER, BUCKET, SWEEPER, BACKHONES, INDUSTRIAL GRAPPLE, FORKS
Operating Capacity(kg): 850
Total length: 3465(mm)
Front and Rear Wheel Tread: 1050(mm)
Ground Clearance: 210(mm)
Hinge Pin Height: 2970(mm)
Dumping Height: 2200(mm)
Dumping Forward: 650(mm)
Front Tilt Angle: 31
Bucket Capacity (m 3): 0.43
Tipping Load(kg): 1600
Bucket Break-out Force(Kg): 2100
Max Lifting force(Kg): 2000
Speed(Km/h): 0---13
|
|
* Strongest in class - Full-size skid loader provides high performance and tractive forces
* Vertical-Lift, Heavy-Duty Boom - High-strength, low-profile design increases operator visibility and lifts loads in a nearly vertical path
* High Lifting - Vertical-lift design provides more than 130 inches of lift height, highest in class
* High-Rated Operating Capacity - A powerful 2,700 lb. rated operating capacity
* Choice of Controls - Hand/Foot Controls, Joystick Controls, Dual-Hand Controls
|
|
Power & Comfortable Operation
Rops/Fops canopy is designed for operator comfort, safety and excellent visibility to maximize productivity.
Wide entrance of operator compartment, handles and non slip foot steps are provided for operator convenience.
|
|
Compact and manoeuvrable design, with direction changes achievable within machine length for quicker, easier working in confined spaces.
|
|
|
With a unified design, optimal 60/40 weight distribution, a low center of gravity, long wheelbase, and large tires, John Deeres 300 Series Skid Steers deliver unsurpassed stability and productivity. Other features designed to help these versatile machines overachieve include a patented vertical-lift boom, turbocharged high-torque diesel, smooth and responsive servo controls, impressive pushing power and breakout force, and best in-class visibility. Horsepower ranges from 61 (45.5 kW) to 91 (67.7 kW).
|
|
Maximum Performance and Precise Control
Komatsu's smooth and precise hydraulic system lets the operator feel the performance of the machine. The threespool open center control valve is designed for both single and simultaneous movements to achieve excellent controllability in the positioning of the bucket.
Features and Benefits
Standard Universal Attachment Quick Coupler
Auxiliary Hydraulic Control
Long Wheel Base (1041 mm 41")
Automatic Power Control (APC)
Outstanding Visibility
Super Flow Hydraulics (Optional)
Intelligent Operator Controls
Two-Speed Travel (low impact shift-on-the-go 10.5 kph 6.5 MPH work range and 16 kph 10 MPH travel range)
|
|
|
|
Loaders
