|
|
Slam Latch
Magnetic Catch
Ball Catch
Spacer for Ball Catch
Angle Bracket for Ball Catch
Double Ball Catch PA
Double Ball Catch MS
Door Latch
|
|
FIXED GRIP CAM LATCHES
- Numerous specific sizes provide controlled grip tolerances across a wide range of applications, with or without compression on the cam
- Offer lower installed costs with easy single-hole mounting
- Hand-, tool-, and key actuated options
- Provide options for NEMA 4 and IP-66 applications
|
|
- Compression Latches
- Snap Locks
- Slam Latches
- Over Center Toggle Latches
- Clamp Bridges
- Locking bar systems
- Dead bolt locks
- in zinc die-cast, polyamide or stainless steel
|
|
VISE ACTION LATCHES
- Continuous half-turn action rotates pawl behind frame and compresses it to pull panel up tight
- Numerous activation options – including hand, key, and tool activated compression latches – in locking and non-locking styles
- Models available for use in NEMA 4 and IP-65 applications
|
|
Hinge with integrated rotary damper. This feature enable soft-closing or soft-opening motion in order to prevent excessive shocks to sensitive equipement and avoid injury due to uncontrolled door opening.
Ideal for flaps, covers or machine doors.
|
|
CSH-63 DETENT HINGE (WITH OR WITHOUT DAMPER)
Detent hinge with built-in damper as an option.
Detent will hold lid in open or closed position without secondary support, and optional damper will provide soft closing.
Operating angle: 100 degrees
(Detent at both 0 and 100 degrees)
Detent holding force: 10.2 kgf-cm (8.8 lbs-inch)
Damper torque range: 10.2 to 25.5 kgf-cm (9 to 22 lbs-inch)
Material: Zinc Alloy
Please visit our website for more detent hinges or view our PDF Catalogues here (#152, page 177).
sugatsune.com sugatsune.co.jp sugatsune.net
|
|
|
|
|
|
DICTATOR furnishes a large range of doorclosers and related products. It offers also solutions for a lot of special and demanding applications.
Special door closer solutions
DICTATOR provides two special doorclosers especially for gates in fencings of industry plants, kindergardes, play grounds etc. The RTS tube doorcloser is virtually invisible due to the fact that it is built into the door or the gate. The DIRECT doorcloser is installed on the door / gate.
Floor springs: the DICTATOR WAB floor spring is the ideal solution for large, heavy and highly frequented hinged doors up to 600 kg. The fact that the complete interior is filled with oil assures a troublefree damping and closing and a extremely long life.
Back check
The DICTATOR back check with hydraulic damping for hinged doors, slows down the opening movement of the door before it reaches the open position and limits the opening angle of the door. It prevents damage to the door by providing a cushioning effectat the required angle and reduces the danger of injuries and accidents to persons. The back checks are available with and without adjustment.
Closing springs
DICTATOR closing springs can be either built into the doors or installed on the door, recommended to be used n combination with a DICTATOR door damper.
Swing door hinges: the Hawgood swing door hinges are available for different door thickness. Their special feature: due to their construction they swing the door leaf out of the passage thus leaving the largest possible passage way.
|
|
Camloc draw latches provide an adjustable, high-performance method ideal for securing machine and equipment parts that must be opened or removed frequently.
Benefits:
Locking and unlocking the fastener is simple – simply clip / unclip the handle.
Excellent tensile load carrying capacity – reducing the number of fasteners required.
Tolerance adjustments through draw-hook mechanism – allows for variations in latch and strike proximity.
Also available with secondary locking mechanism – increasing the vibration resistance.
Without Secondary Lock
With Secondary Lock
With Hasp
For riveting or screwing
For welding
Adjustable drawhook
|
|
Camloc draw latches provide an adjustable, high-performance method ideal for securing machine and equipment parts that must be opened or removed frequently.
Benefits:
Locking and unlocking the fastener is simple – simply clip / unclip the handle.
Excellent tensile load carrying capacity – reducing the number of fasteners required.
Tolerance adjustments through draw-hook mechanism – allows for variations in latch and strike proximity.
Also available with secondary locking mechanism – increasing the vibration resistance.
Without Secondary Lock
With Secondary Lock
With Hasp
For riveting or screwing
For welding
Adjustable drawhook
|
|
Camloc draw latches provide an adjustable, high-performance method ideal for securing machine and equipment parts that must be opened or removed frequently.
Benefits:
-Locking and unlocking the fastener is simple - simply clip / unclip the handle.
-Excellent tensile load carrying capacity - reducing the number of fasteners required.
-Tolerance adjustments through draw-hook mechanism - allows for variations in latch and strike proximity.
-Also available with secondary locking mechanism - increasing the vibration resistance.
Without Secondary Lock
With Secondary Lock
For riveting or screwing
|
|
Camloc draw latches provide an adjustable, high-performance method ideal for securing machine and equipment parts that must be opened or removed frequently.
Benefits:
-Locking and unlocking the fastener is simple - simply clip / unclip the handle.
-Excellent tensile load carrying capacity - reducing the number of fasteners required.
-Tolerance adjustments through draw-hook mechanism - allows for variations in latch and strike proximity.
-Also available with secondary locking mechanism - increasing the vibration resistance.
Without Secondary Lock
With Secondary Lock
For riveting or screwing
|
|
Camloc draw latches provide an adjustable, high-performance method ideal for securing machine and equipment parts that must be opened or removed frequently.
Benefits:
Locking and unlocking the fastener is simple – simply clip / unclip the handle.
Excellent tensile load carrying capacity – reducing the number of fasteners required.
Tolerance adjustments through draw-hook mechanism – allows for variations in latch and strike proximity.
Also available with secondary locking mechanism – increasing the vibration resistance.
Without Secondary Lock
With Secondary Lock
With Hasp
For riveting or screwing
For welding
Adjustable drawhook
|
|
OVER CENTER DRAW LATCHES
- Attractive, low-profile surface-mounted draw latch design
- Robust, riveted tamper-resistant construction
- Over-center latching ensures secure closure despite vibration
- Three attractive finishes, plus stainless steel material option
- Optional keylocking security
PULL DRAW LATCHES
- Flexible latch handles absorb/reduce vibration, compensate for variations in mounting distances and alignment
- Wide range of installation variations, multiple lengths, handle shapes
- Mounting tension keeps latches securely fastened
|
|
This bolt is blocked when it is in "off" position, the block is made by a spring incorporated on it, the unblock is made by an electrical signal.
The key has two positions, in the locked position the key can´t be removed, to remove it, it is necessary to unlock the bolt.
It is designed to protect properly people from electrical accidents, it is assembled inside the front of the high, medium and low voltage electrical equipment.
|
|
|
Gunnebo has developed SeRitz motorised locking systems which can either be surface-mounted (SeRitz 2100) or flush-mounted (SeRitz 3000) to a door to increase the level of security. SeRitz guarantees locking security for access control and evacuation procedures.
|
|
69-571 Medium size latch. The face-plate is finger operated to open and close this flush, strong latch. A lock can be fitted into the finger-plate. The lock is not subject to load when closed. An integral screw allows adjustment to be made when fitting. A surround plate is available (00-571 SP SS).
65-614 Large heavy duty latch for covers, panels, single or double hinged bonnets. Engages on bar up to 10mm diameter. A screw and locking nut allows 6mm adjustment for exact fitting. Provision is made for a padlock, or a version is available with keylock facility. Material is mild steel with zinc plated finish as standard. Large quantities may be finished to customers requirements.
|
|
- Surface and flush mounted doors
- concealed hinges
- torque and/or lift-off hinges
- SNAP-LINE tool-less assembly hinges
- 90°, 120°, 180° or 270° maximum degree opening angles
|
|
hinges in plastic
Metal zippers
Angular screws
Glue support
|
|
- Material: stainless steel body 1.4401; stainless steel drawbolt.
- Maximum angle of rotation 270°.
|
|
HINGE STAINLESS STEEL
Japanese manufacturer, Sugatsune, has a wide range of Industrial and Furniture hinges.
Please visit our websites or see our PDF catalogues here.
sugatsune.com, sugatsune.net (industrial only), sugatsune.co.jp
|
|
|
Normont offers a wide assortment of high quality hinges. We stock hinges in all styles, gauges, sizes and materials. All of our hinge products must pass through our demanding ISO 9001:2000 inspection process. We have the capacity to manufacture custom products efficiently to meet your special requirements.
|
|
CONSTANT TORQUE HINGES
- Hold panels fully closed, fully open, or partially open at any desired angle
- Provide smooth, consistent operation throughout the entire range of motion
- Wide variety of sizes/torque options satisfy applications ranging from portable phones and computers to large enclosures
|
|
|
Bett Sistemi designs its “Original BETT Sistemi” STANDARD COMPONENTS for application on machines and equipment for the industry. In particular, Bett Sistemi designs, manufactures and markets the B Hinges line (available in aluminium and technical polymer). As well as forming an integral part of the systems supplied by BETT Sistemi, these products can be adopted on the entire machine because of their functionally and design.
|
|
EMKA makes over 100 different hinges, each has a unique combination of functional features and installation methods.
Selection is based both on the features the end user needs and wants and the installation method that is most suitable and cost effective for the enclosure manufacturer. Hinges can be separated into those that work with the two door types: Flush or Surface mounted (Projected).
EMKA offers a wide range of products for sheet metal enclosures:
- latches,
- locks,
- swing handles,
- machine handles,
- hinges,
- stainless steel hardware,
- gaskets and edge protecting profiles, aluminium windows and doors, HF-protected hardware, etc..
Integrated control system for server racks or cabinet monitoring (access, air conditioning, trouble, theft), network integration, plug-and-play modules for 19” racks, sensors.
|
|
18400 / 18500 Series
The "Whaletail" series T-handle is designed to fit most existing t-handle cutouts due to the innovative blind mount bracket designed for panel ranges of .03” to .125”. Product features include an ergonomic handle for large grip, flange gasket for water-resistant construction, built-in key cylinder cover, double-bitted key cylinders are used with over-molded keys, pad-lockable feature, compression roller cam for ease of operation and tight sealing. Available in single or multi-point latches. Die cast handles available in: all black powder coat, all chrome, or black and chrome. Plastic handles available with black receptacle with black powder coat handle or chrome handle. Models available to work with Eberhard Power-UpTM locking system.
Other standard stainless steel T-handles are also available from Eberhard.
|
|
|
|
Hinges, Latches
