Metal hinges

Length: 20 mm - 80 mm
Width: 20 mm - 40 mm

... heavy-duty T1 Hinge X 8 40x40, heavy-duty with Clamp Lever Hinge 5 20x20, heavy-duty T2 Hinge 6 30x30, heavy-duty Hinge 8 40x40, heavy-duty Hinge ...

Length: 40 mm
Width: 40 mm

Ball-Bearing Hinge Enables movement through up to 180° Two ball bearings provide excellent load-carrying capacity Wear-resistant and robust Ball-Bearing Hinge 8 40x40

Length: 40 mm - 80 mm
Width: 40 mm - 80 mm

... Profile V 10 z light, natural Hinge Al light, Pin Set D6 Hinge Leaf 8 40x40 Hinge Leaf 8 80x40 Hinge Leaf 8 80x80 Hinge Pin D8x51 Hinge ...

Length: 42 mm - 60 mm
Width: 42 mm - 60 mm
Thickness: 5.3 mm - 6.3 mm

... round ring, situated on the rear part of the adjusting inserts, offers a secure mounting by carving the knurlings on the hinge holes. ROTATION ANGLE (APPROXIMATE VALUE) Max 180º (-20° and +160° being 0° the condition ...

Length: 40 mm - 60 mm
Width: 40 mm - 60 mm

Material: Die-cast zinc alloy. Conical frictioning elements: Acetal resin based (POM) technopolymer. Adjusting screw and nut: Zinc-plated steel. Standard executions: CMUF-SR: epoxy resin coating, RAL 9006 light-grey colour, ...

... steel. GUIDE BUSHINGS FOR PIN Polyamide based (PA) technopolymer. SET SCREWS Stainless steel self-tapping screws 4.8x15.9 DIN 7982 (frame side) and stainless steel M5x10 semi-rounded head screws ...

Width: 30 mm - 48 mm
Thickness: 5.5 mm - 9 mm

Hinges for panel elements and aluminium profiles, non lift-off. The hinges can be fitted with a plastic spacer on the hinge pin. The hinge works with a joint connected ...

Length: 80 mm
Width: 40 mm
Thickness: 8 mm

Description Material: Die-cast zinc. Hinge pin stainless steel. Washer thermoplastic. Version: Hinge black powder-coated. Pin bright. Washer black. Note: Elongated holes enable easy horizontal adjustment.

Length: 48 mm
Thickness: 9 mm

... Die-cast aluminium. Hinge pin stainless steel. Version: Hinge matt nickel-plated. Pin bright. Note: Hinges for panel elements and aluminium profiles. The hinges can ...

GHC34-8 HALF OVERLAY GLASS DOOR HINGE (W/ CATCH) Features Hinge for glass/acrylic doors. Holds door in closed position without secondary support.

Length: 400 µm - 1,000,000 µm
Width: 74 µm - 97 µm
Thickness: 3.5 mm

... is commonly used as a tabletop piano hinge. This Sugatsune versatile tool is particularly designed in aluminium and stainless steel (pin) with a silver, brown and black finish. The HG-MH is not a load ...

Length: 65 mm
Width: 40 mm
Thickness: 2.5 mm

The Stainless Steel Lid Stay Holds bu Sugatsune can be configured and set up in pairs or individually, depending on the user's requirements. It is ideal for left and right hand mounting. These special hingers are constructed ...

Length: 30 mm - 60 mm
Width: 30 mm - 60 mm
Thickness: 7.5 mm - 15 mm

... and production industry, Ganter offers wide assortment of plastic, stainless steel, steel, aluminium, or zinc die casting hinges. These tools are very useful in completing various projects and ideally used to increase ...

Length: 101 mm
Width: 49 mm - 79 mm
Thickness: 22.5 mm

... GN 139.2 Hinge has a compact design that allows installation in confined spaces and also imparts safety and looks good. The hinge is tamperproof due to the covered bolts at its rear side. For mounting ...

Length: 39.2 mm - 49 mm

The Hinges GN 129 hinges are normally used for doors that are flushed with an outside frame. The first type consists of two-part hinges that make it possible to unhinged doors with two ...

Length: 57.1 mm
Width: 50.8 mm
Thickness: 12.7 mm

... direction Extended housing option can replace two hinges in some applications Standards and Specifications Long-lasting hinges are rated to stay within ±20% of rated torque value for 20,000 cycles Hinge ...

Length: 48.1 mm - 97.9 mm
Width: 48 mm - 98 mm
Thickness: 20.5 mm - 37 mm

The C/C series of nylon plastic hinges are constructed with a stainless steel pin and black reinforced nylon plastic. It also has a threaded zinc plated steel stud.

Length: 48.1 mm - 97.9 mm
Width: 48 mm - 98 mm
Thickness: 20.5 mm - 37 mm

This Nylon plastic hinges are very economical, durable, and ideal for use. It is made of black reinforced nylon plastic, while the pin is made of stainless. The use of plastic gives this product the longevity needed in ...

Length: 48.1 mm - 64.9 mm
Width: 48 mm - 98 mm
Thickness: 20.5 mm - 37 mm

The C/B series, which is manufactured by Gamm, is a plastic hinge that is reinforced with nylon, and is integrated with a pin made of stainless steel. The hinges have a maximum working load that ranges ...

Length: 82 mm
Width: 21 mm
Thickness: 3 mm

Removability:RemovableMaximum Rotation:180⁰Offset Distance:15.0 mmOverall Width:21.0 mmPin Diameter:5.0 mmPin Material:SteelMounting Orientation:Right or Left HandedMounting Method:ScrewBody Material:Stainless SteelOverall Leaf Length:41.0 ...

Length: 60 mm
Width: 32.5 mm
Thickness: 2 mm

Removability - :Removable Maximum Rotation - :120⁰ Door to Frame Clearance - :5.0 mm Offset Distance - :20.0 mm Overall Width - :32.5 mm Pin Diameter - :5.0 mm Pn Material - :Stainless Steel Mounting Orientation ...

Length: 50 mm
Width: 50 mm
Thickness: 11 mm

Leaf Thickness - 6.0 mm Leaf Thickness, 11.0 mm | 0.433 in Overall Thickness Item code: 099112E 544 In stock This Half Threaded Stud & Half Counter Sunk Leaf is 50.0 mm | 1.969 in width and 50.0 mm | 1.969 in long. Has maximum rotation ...

Hinges aluminium, lift-off, right Material:Die-cast aluminium. Hinge pin stainless steel. Version:Hinge matt nickel-plated. Pin bright. Note:Hinges for panel elements ...

Hinges die-cast zinc, with locking lever Material:Hinge die-cast zinc. Hinge pin steel. Lever fibreglass reinforced thermoplastic. Mechanism steel. Version:Hinge black ...

Hinges steel or stainless steel internal, opening angle 90° Material: Steel, pins and connecting elements 1.4016 stainless steel. Stainless steel 1.4404, pins and connecting elements ...

Length: 30 mm - 90 mm
Width: 30 mm - 60 mm
Thickness: 1.5, 2 mm

Length: 50 mm
Width: 50 mm
Thickness: 2 mm

PIANO HINGE ROLLED KNUCKLE DRILLED COUNTERSUNK - STAINLESS STEEL 304

Length: 40 mm
Width: 40 mm

Features: POLISHED AND SANDBLASTED HINGES • Material stainless steel 1.4301 hinge with inside fixing system through holes M6; screw M8 L= polished surface finishing S= sandblasted ...

Length: 80 mm
Width: 30 mm

Features: POLISHED AND SANDBLASTED HINGES Material stainless steel 1.4301 Hinge with inside fixing system with two holes M8; screw M8L= polished surface finishing S= sandblasted surface finishing

Features: POLISHED AND SANDBLASTED HINGES • Title of the page Stainless steel hingesMaterial: stainless steel 1.4401Stainless steel drawbolt; fixing through N°4 screws M6; maximum ...

Sturdy hinge for right and left hand application Material Wings: Die-cast zinc Pin: Stainless steel Surface Black powder coated Fastening From the front, using countersunk screws Pack Quantity 10 pieces

Description To hinge panels or aluminum profiles Material Wings: Nylon PA, glass filled reinforced Bolt: Stainless steel Color Black Fastening From the front, using M6 countersunk screws Pack ...

Description To hinge panels or aluminum profiles, each with a holes for centering bolts Material Wings: Die-cast-aluminum Pin: Stainless steel Centering bolt (optional): Nylon PA, glass ...

The ESH is a safety switch manufactured by Euchner. This switch is designed to be used for hinged doors. It features a hinge that has an integrated safety function and is suited for profile assembly.

Length: 1,000 mm
Width: 15 mm - 127 mm
Thickness: 0.7 mm

Opening angle 270°. Other lengths and pin materials are available on request. Specific drilling requirements are also available on request.

Length: 120 mm
Width: 40 mm
Thickness: 1.5 mm

Closing spring force: M(0°): 0.28 N.m / M(90°): 0.56 N.m / M(180°): 0.85 N.m

Length: 77 mm
Width: 55.2 mm
Thickness: 54 mm

Links in aluminium. Pins in zinc plated steel for 70-1-3647. Pins in 304 Cu stainless steel for 70-1-3648. Mounting features: - For nested doors or surface mounted doors. - LH or RH options. - For horizontal or ...

Length: 80 mm - 95 mm
Width: 12 mm - 18 mm

Length: 84 mm

Length: 110 mm

The CL218 concealed hinge is available in many types including the CL218-1 type, CL218-2 type and CL218-3 type. This product adopts the steel hinge leaf plated with the white zinc. Its opening angle is 90 degree.

Length: 40 mm - 1,000 mm
Width: 20 mm - 131 mm
Thickness: 0.8 mm - 9.5 mm

... Plastic detent hinges New -Screwed hinges -Stainless steel crewed hinges -Marine hinges -Screw frame hinges -Round stainless steel ...

... Plastic detent hinges New - Screwed hinges - Stainless steel crewed hinges - Marine hinges - Screw frame hinges - Round stainless steel hinges - Square rivet hinges - Sprung hinges in steel or stainless steel - Adjustable friction hinges ...

Small size box Material : SUS 304

Length: 30, 40 mm
Width: 25 mm - 40 mm
Thickness: 0.8 mm

In the Marinetech download area, you'll find everything about our range of stainless steel connecting elements available for free use.

Length: 50, 60, 70 mm
Width: 40, 50, 53 mm
Thickness: 0.8 mm

In the Marinetech download area, you'll find everything about our range of stainless steel connecting elements available for free use.

Length: 38 mm
Width: 38 mm
Thickness: 2 mm

In the Marinetech download area, you'll find everything about our range of stainless steel connecting elements available for free use.

Hinge accessory - Detachable aluminum Hinge Size 25 - Type of material: Aluminum

Hinge accessory - Non-detachable aluminum Hinge Size 25 - Type of material: Aluminum

Hinge accessory - Detachable stainless steel Hinge Size 25 - Type of material: Stainless Steel

E6 / ST - Constant Torque Position Control Hinges Southco’s line of Constant Torque Position Control Hinges provide constant resistance throughout the entire range of motion, enabling users to easily ...

Length: 30 mm
Width: 35 mm
Thickness: 25, 30 mm

... PlacoGrip® Hinges with short dead-end thread. Thief-proof since they cannot be dismantled from the outside. Standard material Reinforced polyamide Pin Stainless steel 1.4305 Threaded ...

Length: 54, 30 mm
Width: 44, 35 mm
Thickness: 30, 25 mm

... PlacoGrip® Hinges with male thread. Thief-proof since they cannot be dismantled from the outside. Standard material Reinforced polyamide Pin Stainless steel 1.4305 External thread Steel ...

Length: 54, 30 mm
Width: 35 mm
Thickness: 25 mm

... PlacoGrip® Hinges with short dead-end thread. Thief-proof since they cannot be dismantled from the outside. Standard material Reinforced polyamide Pin Stainless steel 1.4305 Threaded ...

Length: 38 mm
Width: 40 mm
Thickness: 10 mm

The QM10 series is a constant-torque hinge developed by LEECO Technologies.It si mainly used for display panels, hinged doors, industrial enclosures, headrest cushions, office equipment, housing appliance, medical equipment, ...

The Custom Friction Hinge is developed by LEECO Technologies. It comprises 2 types, the symmetric counterbalanced friction hinge and asymmetric counterbalanced friction hinge. This counterbalance ...

Length: 39.25 mm
Width: 44 mm
Thickness: 10 mm

Applications: Display panels, hinged doors, industrial enclosures, headrest cushions, office equipment, housing appliance, medical equipment, seating… Torque ratings: Symmetric: 0.9 - 2.7Nm Asymmetric torque: 0.8 - 3.4 Nm Cycle life: ...

Application: Side luggage flaps hinge Design: Strong and Robust design Corrosion resistance: Yellow Cr+3 coating 240 hours salt mist approved Delta protekt 2 x KL100 plated 504 hours salt mist approved Rivets: ...