|
|
| 2-Way Direct Acting solenoid valves are available with 1/8" - 3/8" NPT or BSP threads and Brass, Stainless Steel or Polymer cock bodies. Our E-Series offers a small compact 5 watt version for the light duty to consumer market while the Industrial Series offers a robust 10 watt manufacturers of solenoid for critical applications and higher pressure ratings. |
|
Medium: water, air, neutral fluids
Ambient temperature: -10 to +50 [°C]
Voltage: 230 [V], 50 [Hz]; 24 [V] DC
Coil power: 8,5 [VA]; 6 [W]
Protection enclosure: IP 65
Duty rating: 100 [%]
Mounting position: optional
Materials
· industrial seal - NBR
· body - brass
· internal parts - stainless steel
|
|
| 2-Way/3-Way Electro valves in sizes from 1/8" to 3" NPT/BSP threads and 1/4" or 3/8" John Guest Push-In Connections in Brass, Stainless Steel or Polymers. Pressure ratings from 0 to 2,200 psi (0-151.7 bar). B/C Cock offers a wide variety of voltages, coil housings and custom options to meet any requirement while keeping costs down. |
|
Electrovalve with BRASS and STAINLESS STEEL 316 body.
2 ways normally closed and normally opened.
Direct, indirect and combined acting
Professional seals: Buna (NBR), Viton (FKM), EPDM, Ruby, Teflon (PTFE).
Coils: Standard, Bistable, Explosion proof
Port size from 1/8" to 2" and soket.
Fluid temperature up to 180°C.
The ODE electro magnet cock range 2ways can be used in a wide quantity of applications whereas fluid compatibility with materials and performance are respected. Fluids can be gaseous or liquids.
The class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
| The Alcon 2- way Gas & Fuel Oil Solenoid valves are offered in 3 series of cocks. The UGB Series has lightweight aluminum construction and is ideal for low-pressure natural gas. The U28 Series features a compact design that is ideal for air, inert gases, manufactured gas, natural gas, lp gas or light oil. All of these are approved safety shut-off valves. The UACF Series also features a compact design with Viton industrial seal configuration providing approved safety shut-off for fuel oils. |
|
Solenoid valve suppliers with BRASS and STAINLESS STEEL 316 body.
3 ways Normally closed and universal.
Professional seals: Buna (NBR), Viton (FKM), EPDM, Ruby.
Coils: Standard, Bistable, Explosion proof
Port size 1/8", 1/4" and socket.
Fluid temperature up to 180°C.
The 3 ways direct acting range is suitable for industrial actuators control, and in application directly in contact with the process fluid (ais, gas compatible with cock materials, water, steam, liquids compatible with materials). THe class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
| 3/4" high capacity (DN22, kv=105 l/min) universal coil valve, operating pressure up to 2 bar in all directions (3/2 NC, 3/2 NO, collector, diverter). |
|
| Alcon 3-way General Purpose Electro valves are ideal for mixing, diverting and venting applications. The U31, U32 and U33 Series feature a compact design available in a wide range or orifices. These cocks are zero pressure rated and offer a choice of valve materials for its body and professional seals. |
|
Coil valve with BRASS and STAINLESS STEEL 316 body.
3 ways Normally closed and universal.
Professional seals: Buna (NBR), Viton (FKM), EPDM, Ruby.
Coils: Standard, Bistable, Explosion proof
Port size 1/8", 1/4" and socket.
Fluid temperature up to 180°C.
The 3 ways direct acting range is suitable for suppliers of actuators control, and in application directly in contact with the process fluid (ais, gas compatible with cock materials, water, steam, liquids compatible with materials). THe class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
In an ever increasing typology of applications, is by now necessary avoid the oxidation involves any part of plant and instrumentation.
To meet this requirement, SIRAI® has designed a new solenoid valves suppliers series, characterized by the high quality of body material, made in PPS.
Besides solving definitely the problem of oxidation, these solutions allow to reduce the limescale.
The choice of an high quality polymer, particularly resistant to chemical and physical aggressions, allows to use these cocks for a wide range of fluids, including low-pressure steam. PPS, furthermore, offers a good level of tolerance to ultraviolet rays and flames exposition.
These features, together with other peculiarities of the project, make these valves the best solution for several applications, especially in the field of small sterilizing manufacturer of autoclaves.
Solenoid manufacturers valves are available in different versions: 2/2NC, 2/2NO, 3/2, 1/8” threaded or barbed ports. Also the electrical part draw up at the same level of high quality standards.
The compact coil, with a perfect balance between power absorption and magnetic performance, is available in “F” or “H” class, also homologated according to the main international standards. |
|
Features and Benefits
• Pilot operated spool valve technology,
3/2 or 5/2 convertible, by the user.
• High Flow Design: Cv = 1.4, Kv = 1.2
• Integral Push Button Manual Override is standard
• LED power indicator is standard
• Rapid response time up to 5 cycles per second
• Duty Cycle: 100% Continuously Rated for
multimillion cycle life
• Integrated exhaust ports for variable speed control
in 3/2 configuration
• Operating Pressure 37 - 150 psi (2.5 - 10 bar)
NAMUR Interface Cocks ideally suited
for direct actuator mounting
The Universal NAMUR Series Valves from Alcon are
perfect for piloting single and double acting supplier of actuators
used on process valves such as butterfly and manufacturer of ball valves.
Markets Served
• Offshore
• Petrochemical and Chemical Industries
• Paper/Pulp Recycling
• Food Processing
• Professional water treatment Plants
|
|
Model Number PDT-4C1
- Dimensions ( mm）Dia. 44.5×H52
- Type 2way-NC
- Orifice Diameter (mm) 4
- Port Connection Rc1/8
- IN Pressure 0 - 300kPa
- OUT Pressure 0 - 100kPa
- Ambient Temp. Range 0 - 60
- Air Pressure for Action 300 - 600kPa
- Port Connection for air pressure Rc1/8
- Body Material PTFE
- Professional seal Material PTFE |
|
Internal parts: Stainless steel
Professional seals: NBR, EPDM, FPM, PTFE
Fluid temperature: -10°C to 90°C (NBR), -10°C to 130°C (FPM, PTFE)
max 130°C (EPDM)
Ambient temperature: max 55°C
Viscosity: max 21 mm2/s
Response time: 10 to 20 ms
Voltage: 230, 115, 48, 24 V 50/60 Hz, 24, 12 V DC
Duty cycle: continuous (ED100%)
Cycling rate: max 1000 cycles/min
Electrical protection: IP65 (with plug to DIN 43650)
|
|
Manufacturer of solenoid valve with BRASS and STAINLESS STEEL 316 body.
2 ways normally closed and normally opened, 3 ways.
Direct, indirect and combined acting
Professional seals: Buna (NBR), Viton (FKM), EPDM, Ruby, Teflon (PTFE).
Coils: Standard, Bistable, Explosion proof
Port size from 1/8" to 2" and soket.
Fluid temperature up to 180°C.
The ODE solenoid cock range 2ways can be used in a wide quantity of applications whereas fluid compatibility with materials and performance are respected. Fluids can be gaseous or liquids.
The class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
The strength and reliability of this range of solenoid valves manufacturers make them the ideal solution for a wide variety of industrial applications. They are particularly suitable for the control of water, air, inert gases, steam and non-aggressive fluids in general.
The strong compact body and the technical solutions adopted permit reduced overall dimensions, reduced installation times and targeted maintenance.
Produced in 2/2 or 3/2 normally closed, open or universal service versions plus proportional control and latching versions.
The numerous standard models, the special versions already available in the catalogue and the possibility of developing new cocks to satisfy specific needs, mean that SIRAI can provide solutions for the most complex applications.
|
|
Model number MCV-2R-N1/4UF
Dimensions (mm) Dia.26 x H48.7
Type 2way-NC
Orifice Diameter (mm) 2
Port Connection 1/4-28UF
Inlet Pressure (kPa) -27 - 100
Outlet Pressure (kPa) 0 - 50
Ambient Temp. Range 0 - 60
Fluid Temp. Range 0 - 60
Voltage (V) 100AC
Power Consumption (W) 3.5
Operating Duration Continuous Duty
Coil Temperature Increase 50
Insulation Class B
Body Material PPS
Industrial seal Material FPM |
|
ODE is specilized in development and production of customized coil valve systems. Compact design, assembly cost reduction are added value the customer can benefit.
Contact us for any request. |
|
Industrial solenoid valve with BRASS and STAINLESS STEEL 316 body.
2 ways normally closed and normally opened.
Direct, indirect and combined acting
Professional seals: Buna (NBR), Viton (FKM), EPDM, Ruby, Teflon (PTFE).
Coils: Standard, Bistable, Explosion proof
Port size from 1/8" to 2" and soket.
Fluid temperature up to 180°C.
The ODE solenoid manufacturers cock range 2ways can be used in a wide quantity of applications whereas fluid compatibility with materials and performance are respected. Fluids can be gaseous or liquids.
The class H coils permit to work up to 180°C and bistable coils allow low energy consumption for portable applications or where temperature increase must be avoid. The explosion proof coils works in potential explosive environments. |
|
1. 4.2mm square: 4.2¡Á4.2¡Á23.1mm*1
An innovative and groundbreaking ultra-small manufacturers of solenoid valve - can be mounted in the smallest of spaces, minimizing the manifold size and shortening the length of flow paths.
*1 Dimensions for FV-2-MFG, not including wire connections
2. Diaphragm valve
Excellent chemical resistance ¨C PEEK and Perfluorelastomer are used for wetted materials (materials can be changed according to your requirements).
3. Internal volume only 1.1¦Ìl*2
Through pursuing miniaturization to the uttermost limits, internal volume is now only 1.1¦Ìl ¨C contributes to reductions in reagent and sample quantities and improvements in analysis accuracy.
*2£ºvalue for FV-2-MFGA(B). FV-2-N1G: 4.3¦Ìl¡¢FV-2-MFG: 1.5¦Ìl |
|
| Intended for use in applications requiring flow control of air, oxygen or similar inert gas; often in combination with electromagnetic industrial air pumps e.g. waste professional water treatment, aquarium oxygen supply, fishery, medical appliances, bubble baths, etc. |
|
Technical details of Type 23:
2/2-Way direct acting solenoid valves suppliers
Body: GG-25, GS-C25, Stainless Steel
Sealing: NBR, FKM, EPDM
Connection: flange DN15-DN250
Pressure range: 0-1 bar
Cocks of this type switch the sealing element directly via the magnetic systems. In this case the professional seal usually needs to be lifted against the effective operating pressure from the seat simply by the industrial actuator. A closing spring keeps the valve closed, supported by the pressure of the medium. The function depends on the size of the seat, the effective operating pressure and magnetic power.
Direct acting supplier of solenoid valves do not have any pilot orifice. So these valves are less sensitive to any slight pollution of the media.
These valves are ideal for vacuum applications. They operate from 0 bar up to the maximum operating pressure.
Direct acting solenoid valves are used, for example, for:
- Vacuum technology
- Venting of gas and tank systems
- Safety control units for industrial burner control systems
- low pressure gas supply for industrial and domestic applications in accordance with DIN EN 161
Extras for direct acting valves are, for example:
- normally open
- increased pressure range
- position indicator
- ex-position indicator
- explosion proof
- temperature design up to +200°C
- high viscosity media
- special flange ANSI
- NPT-thread
- special voltages
- free of oil and grease
- outdoor application
- free of nonferrous metal |
|
| Bürkert products and systems can be used wherever fluid media and gases need to be measured, controlled and regulated. Whether the application is filling, level, flow, pressure or temperature we have a solution and a uniquely comprehensive range of products to handle it, including supplier of solenoid, process and analytical cocks, pneumatic actuation, sensors and controllers. |
|
KV Process regulation Ltd has a wide range of approved Externally Piloted and Electro magnet Operated cocks.
KV Process Controls Ltd ATEX approved valves are available to meet equipment Group II, Cat 1, Cat 2 and Cat 3. Eexia / Eexm / Eexem / Eexd are available in various configurations.
|
|
|
|
Solenoid valves for all fluids
