- Building - Construction >
- Industrial Building Equipment >
- Partitions, Modular construction elements
Partitions, Modular construction elements
C-shaped guide profile Use: for construction of linear guides. Material AFNOR 6060 anodised aluminium 15 µm, galvanised steel nuts and bolts. State of supply version with fastening holes complete with M6x16 countersunk head screws and M6 nuts.
BETT SISTEMI
Width: 18 mm
Height: 32 mm
Material aluminium EN AW-6060 (T5)p. . Notes: on request, the bars may be delivered cut to size. * to be used when anodising prevents grounding. Hot-rolled profiles p. .
BETT SISTEMI
Width: 18.5 mm
Height: 45 mm
Material aluminium EN AW-6060 (T5) Notes: on request, the bars may be delivered cut to size. Hot-rolled profiles System characteristics Finishes on request Dimensional tolerances
BETT SISTEMI
Made of eco-friendly, weather resistant 50% recycled polyethylene Roll top doors allow access from front or rear Features grounding capability, integral anchor bolts, and moulded lugs for padlocks A spacious interior enables safe addition ...
Width: 20 mm
Height: 10 mm
Groove width 5mm Standard length 2000 mm Other lengths available on request
ZIMMER GROUP
Width: 20 mm
Height: 20 mm
Groove width 5mm Standard length 2000 mm Other lengths available on request
ZIMMER GROUP
Width: 40 mm
Height: 20 mm
Groove width 5mm Standard length 2000 mm Other lengths available on request
ZIMMER GROUP
Designed for fast travel and high dynamic loads, face shields are ideal for protection around the machine tool spindle. Our face shields are built to specs based on application, load, aesthetic value and cost. These systems are completely ...
Vindur® Turnkey Cleanroom Solutions For Blister Packaging Machines The mechanical, patient-specific blister packaging of medicines is gaining growing acceptance for good reasons: the automated processes save time and costs, prescriptions ...
The WIBOclean® sluice systems for people and materials are available in various models, from ventilated sluice passages and air showers with active cleaning to decontamination sluices. The active sluice works according to the principle ...
Protection system and accident prevention consisting of uprights 40x40 and panels with frame 20x20 connected by screws or fast assembly clamps patented by Satech. It is used for the usual application in all guards for plants and machines.
Satech Safety Technology spa
-All profiles from Standard 0 NbV on are made from high-quality steel S450 J2 mod., in sandblasted version. -Lmax = 12m -Suitable for WINKEL-Bearings system, we deliver all profiles in fixed lengths, immediately from stock. ...
WINKEL
Series D28 construction profiles have a diameter of 28 mm and are compatible with Series 40. They are generally used to create custom workshop and assembly equipment, including light-duty frames, supply trolleys, shelves or extensions ...
Maschinenbau Kitz GmbH
Width: 25 mm
Height: 25 mm
Series 25 construction profiles are based on a grid dimension of 25 x 25 mm and multiples of this value. They are generally used for light-duty frames, cabinets, test set-ups, measurement and test units, as well as electronics housings. Choosing ...
Maschinenbau Kitz GmbH
Width: 40 mm
Height: 40 mm
Series 40 construction profiles are based on a grid dimension of 40 x 40 mm and multiples of this value. They are generally used for lighter machine frames, guarding, assembly work stations, exhibit construction and work platforms. Choosing ...
Maschinenbau Kitz GmbH
Width: 10 mm - 1,000 mm
Height: 0 mm - 320 mm
Welser metal sections are rollformed open sections, closed section tubes, components and complete profile systems made of steel or non-ferrous metals. In close cooperation with our customers, we develop and manufacture custom-tailored ...
Welser Profile GmbH
Width: 10 µm - 1,000,000 µm
Height: 0 µm - 320,000 µm
Welser metal sections are manufactured with a clean, precise cut edge as well as tight tolerances.
Welser Profile GmbH
Width: 10 mm - 1,000 mm
Height: 0 mm - 320 mm
Welser bending parts are made from a wide range of materials – common structural steels, high-strength and stainless steels – with countless different cross-sections (open/welded, asymmetrical/symmetrical, HF/laser welded, thin or thick-walled). ...
Welser Profile GmbH
Width: 12 mm - 36 mm
Load limit: 300 kg
L'Echelle Européenne
Impossible to fasten on the waterproofing unit of the roof. Several obstacles to manage : design to go around the machinery and to be integrated between the skylights of the roof, to manage the roof slope issues and the waterproofing ...
L'Echelle Européenne
Use of materials compatible with the climatic constraints related to the dirty environment. Irregularity of ground levels. Access on trawlers of different heights. Access tilt at 45° for a better climbing comfort Access platform ...
L'Echelle Européenne
Thickness: 6 mm - 25 mm
COMPOCEL® AL is a sandwich panel with a core in aluminium honeycomb bonded to two skins of aluminium. A panel entirely in aluminum. It offers high mechanical properties, perfect when high rigidity and a low weight are required. Being ...
Cel Components S.r.l.
Thickness: 6 mm - 25 mm
COMPOCEL® AL FR is a sandwich panel with a core in aluminium honeycomb bonded to two skins of aluminium. It offers superior mechanical properties and excellent fire ratings. COMPOCEL AL FR has passed the most stringent tests of European ...
Cel Components S.r.l.
Thickness: 10 mm - 25 mm
COMPOCEL® ALP is a sandwich panel with a face in aluminium material and a core in polypropylene honeycomb. It offers high mechanical properties which permit to use this panel as floor and for furniture and interiors.
Cel Components S.r.l.
Polycarbonate means durability and safety of your electronic display due to its high shock- and impact resistance and good flammability properties. PC Clear is a transparent polycarbonate solution with great durability and light transmission. Our ...
Concave sanitary profile in pvc with high hardness and durability, especially for wall/ceiling and wall/wall junctions. The SANITARY PROFILE is shock and impact resistant and consists of two parts. Consisting of: (1) Curved P.V.C. ...
Omega Aluminium profile, sanitary profile for ceilings made of extruded aluminium and white lacquered.To hold panels to the ceiling. Designed for the rib movement inside the profile up to the right position to be fitted with the external ...
A selection of moulded components for various applications. By various moulding systems, special shapes are created in silicone rubber, optionally combined with other parts in silicone rubber, metal or plastics. Dedicated material ...
High Temperature Silicone Rubber Coated Fiberglass Tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 500°F/260°C and will withstand a molten splash at 2200°F/1200°C. ...
Ningguo BST Thermal Products Co.,Ltd
1200°F / 648°C Continuous Exposure: Higher Intermittent fire resistant basalt fabric tape fire resistant basalt fabric tape is made from pulverized lava rock and stranded into a fiber material and woven into a proprietary weave. fire ...
Ningguo BST Thermal Products Co.,Ltd
1000°F 520°C Continuous Exposure Higher Intermittent Fiberglass Header Wrap Fiberglass Header Wrap Heat, Flame & Fire Resistant and Thermal Insulating - Premium Grade Color Coded Fiberglass Header Wrap is heat, flame and ...
Ningguo BST Thermal Products Co.,Ltd
Clean room constant temperature and humidity air conditioner Air handling unit system Cooling capacity: 25kW~888kW evironment temperature:2-43℃ Product Detail Main Features of Modular Type Air Handling Unit : 1.Quiet Air Condition ...
Panozzo O profiles offer a complete range of round profiles in various diameters and thicknesses, which suits perfectly to round goods or elongated objects.
With the ELABO hygienic panel, you protect your employees from the spread of viruses between workstations. This is particularly recommended in the SARS-CoV-2 occupational safety standard of the German Federal Ministry of Labour and ...
Our own team of engineers is responsible for our state-of-the-art machinery. Thanks to continuous investment and adjustments, our production site is setting the trend in the sector, always one step ahead. This is the focus not just ...
voestalpine Sadef
Our own team of engineers is responsible for our state-of-the-art machinery. Thanks to continuous investment and adjustments, our production site is setting the trend in the sector, always one step ahead. This is the focus not just ...
voestalpine Sadef
Cold-formed profiles Our own team of engineers is responsible for our state-of-the-art machinery. Thanks to continuous investment and adjustments, our production site is setting the trend in the sector, always one step ahead. This ...
voestalpine Sadef
Width: 27.5 mm
Height: 7.5 mm
Extruded profile for mounting 19-inch racks and 19-inch desktop enclosures. The carrier profile 2 is mounted in the housing and is available both unperforated and with holes in 5.08 mm pitch for mounting card guide rails.
Gie-Tec GmbH
Width: 27.3 mm
Height: 10 mm
Extruded profile for mounting 19-inch racks and 19-inch desktop enclosures. The carrier profile 2 is mounted in the housing and is available both unperforated and with holes in 5.08 mm pitch for mounting card guide rails.
Gie-Tec GmbH
…ideal for manufactoring device housings. Alu-extrusion press profile natural anodized Profile inserts for mounting blanks and sheets up to 1,6 mm. For the assembly of end plates, the profiles have inlets for M5 screws or tapping screws Ø5,0mm.
Gie-Tec GmbH
Width: 10 mm
Height: 12.8 mm
For securely casing in face elements like glass into nut 10 profiles. Material: PP, TPE Color: black Packaging Unit: 50m (25 pcs. à 2m) Extras: Can also be used as cover profile by turning upside down.
TecEnMa GmbH
Width: 7.2 mm
Height: 5.1 mm
To cover nuts with a width of 6mm. Material: PP Color: Black, Silver, Blau, Yellow, Red Packaging Unit: 50 metres (25 pcs. à 2m)
TecEnMa GmbH
Width: 8.8 mm
Height: 3.8 mm
To cover nuts with a width of 8mm. Material: PP Color: Black, Blue, Yellow, Red Packaging Unit: 50 metres ( 25 pcs. à 2m)
TecEnMa GmbH
Machinable Glass Ceramic has a continuous use temperature of 800ºC and a peak temperature of 1000ºC. Its coefficient of thermal expansion readily matches most metals and sealing glasses.It processes good machinability and can be lathed, ...
- Product made entirely of aluminium - Detachable and easily transportable - Product certified as safe Facade access platform for perimeter work on windows
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining