|
|
|
|
|
|
Precision milling/cutting machine (router) the MECAPRO product line offers a very attractive performance / price ratio.
The wide choice of spindles and functions will meet all requirements regarding the machining of materials in the sectors of advertising, sign, sign board, POP, plastics, aluminium transformation…
Some of materials to be used on (according to the selected spindle and tool) :
- Plastic in rigid plates (PMMA-PC-PS-PVC-ABS..)
- Expanded plastic and alveolar plates
- Rigid foams (PU- PS-…)
- Semi rigid foams (KAPA line®,…)
- Composite materials : Alucobond®, Dibond®, Reynobond®,..
- Wood and by-products.
- Polyester resins.
- Vacuum formed parts in plastic or composite
- Light alloys with Aluminium or copper basis.
- Steel and stainless steel
- Stones, marble, granite (only engraving)
Etc…
Dimensions : 1020 x 1520 mm till 6050 x 2020 mm.
The heavy MECAPLUS range is designed for the intensive machining of aluminium, composites and plastics in strong thickness.
Dimensions : 1000 x 2000 mm till 6100 x 2100 mm.
|
|
DIASLIDE 7OOO
3 axial precision cut-off grinding machine
For materials which are delicate and difficult to machine, such as glass, ceramic and composite materials, but also plastics, steel and non-ferrous metals.
The cutting procedure takes place in several steps governed by defined motions in the Z axis in combination with continuous X stroke (cut-off stroke). Severals consecutive cuts can be made (Y axis).
Very hard material textures can be cut to quality standards, thanks to adjustable machining parameters such as cutting disk speed, X feed velocity, Z motion, selective dry or wet cutting etc.
|
|
|
|
|
|
Automated and Accurate
The DCM boasts a fully automatic load and unload mechanism that can handle up to a half ton of corrugated material. A robust vacuum system with field-proven components feeds sheets from the intake pile as it simultaneously removes finished sheets from the cutting platform. The sheet is precisely loaded into position onto the cutting platform in registration.
DCM Cutting and Plotting Table is all-round
The DCM accommodates an entire family of quick-change creasing, cutting, crushing, and special purpose knife tool inserts. The toolhead cuts at maximum machine speed through a range of substrates up to double wall corrugated. Throughout the run, the DCM maintains close registration and exact depth control, making it ideal for converting silk-screened, flexo or digitally printed products.
A workhorse for Short-Run Converting
Highly cost effective for short runs, from 10 to 300-400 items
- Saves cost and waiting time for a cutting die
- Fast setup and changeover
- Low intervention requirements enable unsupervised overnight jobs
- Leaves high-cost and high-capacity equipment undisturbed
- Based on proven Kongsberg XL technology
|
|
CCT - CNC GLASS CUTTING TABLES (STRAIGHT AND SHAPE)
Cutting size 3.700x2.600 mm or 6.000x3.210 mm. Cutting thickness range 2mm - 19mm. Accuracy± 0,2mm. Cutting speed from 0 to 120 m/min. Total power 10 Kw. Lenght 4.200mm. - Width 3.200mm. - Height 890-950mm. - Weight 2.400 kg. - Noise emission within 80 dB. CE brand.
CNC glass cutting machine for only straight is aviable.
|
|
High speed cutting table equipped with "brushless" motors on X and Y axes to allow a higher acceleration (working time reduced), a higher precision and to remove maintenance (the absence of brushes "brushless" system, maintenance-free).
With frame in robust electro welded steel of elevated torsion resistance, 4 cutting wheels (on request) for straight and shaped cutting on glass sheets to a maximum thickness of 25 mm.
TECHNICAL FEATURES
- Option for Low-E removal head
- Automatic oil dosing system according to cutting speed
- Total digitally governed axes
- Working speed up to 140 mt/min
- Instant electronic squaring of the bridge
- Stainless steel and reinforced metal plate frame
- New mechanical tilting system giving maximum efficiency an long lasting reliability
- Electric system with busfiled
- Double zero position for laminate cutting
-The Moving system runs along the X, Y axes by high-precision rack and pinion (GUDEL, from CH)
|
|
|
The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on pipe with diameters from 4" to 16" (100-400 cm). It rotates the pipe on it’s roller bed with a three jaw chuck while simultaneously moving a cutting torch back and forth along the pipe’s axis.
|
|
|
Programmable Gantry System provides coordinated motion in two axis. Can be easily programmed to repeat any contour or pattern for either cutting or welding applications.
|
|
|
|
|
|
V806M Beam coping system
For a more efficient production, the traditional production lines for drilling and sawing can be extended with the Voortman robotic beam coping system. The previous model of the V806M was fitted with an oxygen-cutting torch. Partly due to its practical experience, in the latest development of the V806M, Voortman can integrate into the system a plasma-cutting unit.
The V806M beam coping system, with an integrated roller feed measuring system and a six axis industrial robot, has been developed to eliminate manual layouts, automating all coping, flange weld preparation, mechanical cut-outs, castellations, haunches, beam splitting, cut-off processes such as straight mitre cuts and compound mitre cuts required on structural steel sections.
Flexibility and accuracy
This CNC controlled beam coping system is the only robotic system in the world today combined with a roller feed measuring system for total flexibility and accuracy. Due to the technologically advanced design of the roller feed measuring system, it can be easily incorporated into any existing layout or fully automated system.
|
|
KC 1201 - Coping robot
KC 1201 was specially developed for sections, angles, channels and rectangular tube coping. The compact design features 6 axes. It is mounted on the portal frame and may be moved across the workpiece via a 7th linear axis.
For sections, angles, channels and rectangular tube coping
Compact machine with up to 8 axis
Coping with autogenous and plasma gas cutting system
KC can be combined with drilling machine KD 1215
|
|
DIADISC 45OO
High-tech precision cut-off saw for the laboratory
This new precision cut-off saw has been designed for almost universal
use in laboratories. The standard model is thus optimally equipped.
Special characteristics:
Switch-controlled electrical cutting height adjustment of saw blade
Sliding table, free of play, with prismatic roller guides
Parallel stop with digital measuring system and fine adjustment
Integrated suction arm with brush head. It can be swivelled and adjusted in height
Integrated Micro-atomizer for selective dry or wet operation for highly efficient lubrication and cooling of the saw blade and workpiece
Reserve content level indicator for the micro-atomizer tank
Halogen illuminated work area, with non-dazzle and dimming features
Optimum positioning of operating and display elements
Saw blade and cutting disk depot for 6 tools in the machine (optional)
|
|
CUTTING TABLE FOR LAYING UP MACHINE
Robust frame, table top abrasion resistant.
Conceived to receive laying up machines
Square tubular frames 40 x40mm
Jack of adjustment under each foot
Table top in SODIPAN thickness 25mm
Options:Storage level , Block drawer
Also available: Movable table to move the laying up machine
DESIGNER'S TABLE
For the creators, designers...
Square tubular frame 30 X 30mm
Jack of levelling under each foot
Painted gray anthracite color
Laminated white table top thickness 19 mm
Removable tender coating for pricking of bugs or pins
Block drawer included
Dimensions: 1500 X 3000/1500 X 1500/
1200 X 2500/1200X 1250 (others on request)
Option: Floor of storage
Many possibilities for your style design offices
|
|
The Kongsberg die-less cutting and creasing tables deliver record-breaking productivity and versatility, resulting from leading edge technology.
There is a Kongsberg flatbed plotting table for every need:
- for every format: from small (the XE-series) over large (the XL-series and XP-series) to extra large (the Kongsberg DCM)
- for every material: from vinyl, folding carton, foam to triple-wall cardboard, wood and acrylics (up to 25 mm/1”)
- for every process: creasing, cutting, plotting, milling
- for every application: small-lot production, sample making, finishing of signs and displays
|
|
|
|
|
|
APPLICATION Suitable for cutting OPP tape/PVC tape/Electrical tape/Mask tape/Double-side tape/Kraft tape/Cloth tape.
FEATURES Every machine motion is programmable. Operation ease and flexibility.
Silicon lubricating system: Recirculated silicon lubricant prevents adhesives from clinging to the cutting blade, and ensures smooth cuts each and every time.
Silicon lubricating system prevents the blade from sticking on adhesives and allows smooth cutting at all times. Silicon liquid is recirculated.
Each cut is exactly where It's supposed to be cutting head is positioned by a servo motor-ballscren combination along precision slide-heaving rails. Every move is smooth, fast and every accurate-even extremely long moves.
Each cut has our full support: Hydraulic pressure holds upper and lower tape rolls firmly against the cutting blade for maximum stability-no matter how large or small the roll diameter.
Double roll with single circular knives to increase efficiency greatly.
MAIN TECHNICAL PARAMETERS:
Valid Width 1.0M/ 1.3M/ 1.6M
Max. diameter material :150mm
Max. cutting width:3mm
Inside diameter of paper core: 32-76.2mm
Main motor :3HP
Blade drive motor(Servo motor) :5HP
Blade diameter: 200mm / 250mm
Blade speed:1450KG
Machine Dimension(L*W*H) 3790mm*1550mm*1750mm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, which is compliant to the CE regulation.
|
|
|
|
|
|
APPLICATION This unit is ideal for cutting various log roll materials such as PVC/OPP/PE/Masking tape/Double-side tape/Plastic films...etc.
FEATURES 1. Cutting shaft and circular blade are driven by A.C motor with inverter control, which is able to set running direction obverse/reserve on different requests.
2. Width setting is controlled by servo motor with ball screw and guide rails to make accuracy movement.
3. All functions are operated under LCD touch panel control, which is operator friendly and easy for data setting.
4. Central control system is as PLC unit, it can cut various sizes on one log roll by changing modes automatically.
OPTIONAL PARTS:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Air type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
3. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
MAIN TECHNICAL PARAMETERS:
Valid Width:1000mm/1300mm/1600mm
Max. diameter material:270mm (300 mm)
Max. cutting speed:35cuts/min
Inside diameter of paper core:32-76.2mm
Main motor:5 HP
Blade drive motor(Servo motor):3 HP x 6 P
Blade diameter:150-350 mm
Blade speed:360-1800 rpm
Optional Parts:
1. Other Size Cutting Shaft: It can be made as per the required core I.D.
2. Cutting Supporter: For supporting log roll when cutting core below 38mm.
3. Air Type Cutting Shaft: To improve the cutting accuracy when the tolerance of paper core I.D is too big.
4. Safety Cover: To protect operator during the production, this is compliant to the CE regulation.
|
|
Powerful and accurate milling engraving machines. Available with a wide range of optional equipment (lubrication system, tool changer, power spindles, etc) they are designed to meet any production requirements.
Engraving area: IS6000XP 610x410mm (24x16")
Engraving area: IS7000XP 610x815mm (24x32")
Engraving area: IS8000XP 610x1220mm (24x48")
Max spindle clearance: from clamping table 80mm, from vice 140mm.
|
|
The series of 3-D machines on base of synchronous motor is high-accuracy and reliability machines for pricise drilling, milling and engraving operations. Small dimensions and easy-to-use 3-axes machines are ideal for precision work with various types of materials, including non-ferrous metals, plastics, wood and many others. The primary consequences for us, as manufacturer is to offer future-oriented solutions to problem in 3-axis drilling, milling and engraving fields which are geared to specific customer requirements, grow with changing needs and can be easily put into practice.
Application:
Front panels, housing, printed circuit boards manufacturing, plate, serial numbers, coins, medals, jewelry goods, and 3D model production.
|
|
Cutting Plotter
Jaguar
- DC servo motor technology
- Tri-port interface connectivity
- Up to 600 grams cutting force
- Up to 60 inches per second cutting speed
- Up to 0.8 mm(0.03 in.) media thickness
- Guaranty 10 meter tracking
- User friendly, multi-language control panel
- Ingenious media basket
- Accu-Aligning System for contour cutting(AAS)
|
|
Eastman's Static Table Cutting System provides superior cutting performance and increased throughput. Capable of marking, cutting, drilling and punching virtually any flexible material at speeds of up to 60 inches per second (152.4cm/s); the Static table system registers accuracy of +/- .015 inches (.4mm), with higher accuracies available.
- Single or low-ply layer cutting
- Standard three-tool cutting head
- Standard porous plastic table top
- Optional Lexan®, Urethane, PVC and microfiber table tops
- Ideal for prototyping and sample making
Cutting & Plotting Speed: 60 inches per second (152.4cm/s)
Acceleration: 1.3G
Active Cutting Widths (meters): 1.5m, 1.8m, 2.0m, 2.4m, 2.7m, 2.9m
Custom widths available in 6 inch (15.2 cm) increments
Overall Table Lengths (meters): 3.7m, 7.3m, 11.0m, 14.6m, 18.3m
Custom lengths available in 1.2m increments
|
|
Cutting & Welding
3 Table Set-up:
10' Main Vacuum Table
8' (2.44m) Usable Welding Length
10' Filler Table
6x8' Cutting Table
|
|
STANDARD LINE: Decoiler - Electronic roll feed - Hydraulic shears - Conveyor belt system for transfer press sheet positioning
SHORT LINE: Decoiler - Straighttener/feeder unit - Hydraulic shears - Conveyor belt system for transfer press sheet positioning
|
|
Rotary Flying Shear Cut to Length Line
Flying shear type steel coil leveling/shearing cut-to-length lines are ideal for processing soft or highly surface critical materials. In these lines, the strip does not have to stop at any point of time, thus preventing any marking of the strip.
We can also supply the start-stop style cut to length line, cut to length line with edge trimming etc; coil processing line as slitting line, slitting and cut to length line, tension leveling line.
PLEASE WRITE ALL ENQUIRIES ONLY IN ENGLISH!
|
|
|
With the WOLFANGEL® Vario Cutter it is possible to cut the fibres with a speed up to 20 m/sec. The length of the fibres can be changed during the cutting process at full speed. With this cutter it is possible to produce fibres with a length between 3 up to 100 mm. The cutter can be driven by either a hydraulic or an electric motor. With the possibility of different combinations between knife and rubber role, it is possible to cut nearly all types of fibres.
|
|
|
The MultiCam EZ Knife system was developed to serve markets that require mechanized knife cutting, creasing, and perforation operations. The EZ Knife system supports tangential drag, oscillating and ultrasonic cutting techniques. Choose from many blade types including rotary, spear point, utility, and more. EZ Knife can be purchased as a stand-alone CNC machine based on the MultiCam 1000 Series and 3000 Series motion platforms and can also be added as an option to the 1000, 3000 Router and Plasma Series.
|
|
Our AutoCut M3 features a carbon fiber beam, which provides maximum strength, stiffness, and straightness at a minimum weight. The carriage carries a pen and three cutting tools, all on a heavy-duty cutting head.
The M3 is driven by heavy-duty stepping motors with rack and pinion drives on both x and y axes. Repeatable accuracy is 0.02 inches.
A complete, turnkey system includes an integrated vacuum table, gantry and cutting head, and a friendly, easy to use hardware/ software interface.
|
|
The Eastman MPC-5000™ Multi-Ply Cutting System is an automated reciprocating straight knife cutter, with conveyor, capable of cutting up to 2 in. (5 cm) of compressed material. Material is automatically conveyed from a spreading table to the cutting area where a polyethylene film automatically covers the spread to create an airtight seal.
- Five-stage vacuum turbine ensures material edge hold down during the cutting process
- Standard reciprocating knife with sharpener assembly and optional single/dual hollow punch pneumatic drill
- Intellicut™ knife control software improves the quality of the cut from top to bottom ply
- Cutting area made up of long-lasting bristle blocks allowing the knife to pierce without damage
- Touch screen display and joystick conveniently located on cutting gantry
|
|
|
|
|
|
The solution GraphCut® Mono S, is a table of cutting static allowing a very great quality of cut for all flexible materials mono fold, such as textile fabrics, the technical fabrics (chechmate or impregnated), the cover, the kevlar, and all the flexible materials low thickness. This machine is able to cut out, mark and punch at speeds going up to 1 m/sec with a precision about + 0.5 Misters.
A system of turbine, allowing to create a depression on the table, assurel' immobilisationdu material during the cut to obtain the quality of necessary cut.
Caratéristiques techniques of the GRAPHCUT® MONO S:
Dimension of the table: Modular in length and width compared to the customer need
Support of cut: 2 support provided with the machine (1 felt for the tangential blade/1 micro rigid support perforated for the circular blade)
System of marking: a system of marking pen is installed out of Standard on our machines
Pointing of the origin: A laser pointer is envisaged (standard configuration) making it possible to move the origin to allow resumptions of cut.
Carry tools: 3 tools out of standard: Tangential blade, circular blade, pen of marking.
|
|
|
|
|
|
SteelTailor B-4 CNC Plasma Cutter cuts flat parts out of metal with amazing accuracy and speed.
The bench constituted with a water table and a cross track has a effective cutting area of 1600 mm x 2500 mm. The external dimensions of the bench are 2000 mm x 3500 mm.
The cutting precision is 0.4 mm and the repeatability 0.1 mm. The positioning precision is 0.2 mm
Please, note that the cutting effective area can be adapted to the User’s needs
The cross track is supporting the high control and the plasma torch is light and rigid to accept any sort of plasma torch.
The water level of the cutting table is adjustable.
The weight is 1500 Kg (+/- 20kg) without torch and automatic plasma torch high control system.
The rated power is 2500 W. (380 V, 3 phases, 50 Hz- 220 V 3 phases 60 Hz)
The positioning and cutting speeds are adjustable from 50 mm/min till 10 000 mm/min.
The choice of high quality servomotors associated with reliable reducers provides accurate, high-speed motion. The positioning and cutting operations are really precise and smooth.
SteelTailor B-4 is equipped with an automatic plasma torch high control to ensure the correct position of the plasma torch.
The well proven CNC system used by SteelTailor B-4 makes this Bench CNC Plasma Cutter one of the most reliable machines of the market.
The provided cutting software FastCAM professional version makes the conception, drawing, cutting program very easy. The nesting function optimizes the use of the metal sheet reducing the lost metal sheet areas.
|
|
The innovative answer to maximize productivity and economic viability:
Maximize productivity: speed up cutting operations by more than 1000%!
With rotocutter® a completely innovative cutting system developed by Walter Möck GmbH, you can work 10 to 15 times faster than with previously known methods. Just 3 minutes is all it takes, for example, to cut a copper ring with an external diameter of 500 mm and a wall thickness of 70 mm, and 4 minutes to cut V4A steel 370 mm in diameter with a wall thickness of 80 mm.
|
|
The Eastman MPC-5000™ Multi-Ply Cutting System is an automated reciprocating straight knife cutter, with conveyor, capable of cutting up to 2 in. (5 cm) of compressed material. Material is automatically conveyed from a spreading table to the cutting area where a polyethylene film automatically covers the spread to create an airtight seal.
- Five-stage vacuum turbine ensures material edge hold down during the cutting process
- Standard reciprocating knife with sharpener assembly and optional single/dual hollow punch pneumatic drill
- Intellicut™ knife control software improves the quality of the cut from top to bottom ply
- Cutting area made up of long-lasting bristle blocks allowing the knife to pierce without damage
- Touch screen display and joystick conveniently located on cutting gantry
|
|
|
|
Other cutting machines
