|
|
BEST OF BOTH WORLDS
EMLZ combinations systems associates high performances prper to electric punching,bottom forming system, tapping unit and laser cutting. Owing to its original design,working zones are clearly separated. Designed to produce complex parts to high level of quality at the lowest cost,The EMLZ can be integrated to an automatic production line.
|
|
FINN-POWER LP - INTEGRATION FOR OUTSTANDING FLEXIBILITY
The essence of FINN-POWER LP is the integration of well-proven C series 300 kN hydraulic punching technology with the latest generation of industrial CO2 Lasers.
LP features new coordinate table design for maximum sheet size of 3,074 mm x 1,565 mm without repositioning.
FINN-POWER's experience in the integration of subsequent work stages in the sheet metal working process is easy to see in our laser-punch combination.
The long list of system features and benefits for fabricating sheet metal components results from experience, continuous development and FINN-POWER's commitment to guarantee our customers´ competitiveness.
The availability of punching, forming, tapping, marking and laser cutting capacity in an integrated machine tool means component manufacturing can be planned for optimum quality and speed of production. Whatever the workpiece, you can choose the most profitable manufacturing method, or the most profitable combination of methods. For example, when laser cutting is required, a pre-punched start hole reduces laser cutting time, no piercing occurs, and lens life is prolonged as there are no harmful reflections from the surface of the material.
This intelligent integration increases productivity and offers flexibility for your today's and tomorrows manufacturing.
|
|
The manual punching machine HP M 500 is suitable for those customers who have to produce prototypes and doesn't need any other equipment.
The big advantage of this machine, besides being at 30, 40 or 50 tonnes, is that of fitting different attacks such as Trumpf®, Rainer® or Fimm® type.
The first one is well-known for its exactness while the second one exploits the wide matrix that on the HP M500 can reach the 180mm. With these features the customer can make also holes of important dimensions with a single punch.
|
|
The horizontal mechanical shears with high cutting speed serie Caddy allow the production of considerable quantities of slugs at low costs, ensuring the dimensional accuracy required by the modern forging technologies - cold, warm, hot and also with closed die.- Horizontal construction:no foundation required.
- Shear rotation for the perpendicular cutting even of material with low tensile strength.
- Simple and quick adjustment of the blade clearance.
- Quick change system for the blades.
- Hydraulic clutch for high performances, long life, absolutely quiet (starting from model Caddy 52F)
- Low maintenance costs
- Fully automated loading, feeding, shearing and unloading cycles.
|
|
Cutting length from mm 1050 to mm 4050.
Cutting thickness from mm 2 to mm 14.
Gap from mm 100 to mm 500.
Strokes per Minute from 35 to 70.
Micrometric blade gap adjustment.
Manual backgauge or motorized backgauge with front
readout by single axis positioner.
Front support arms and lateral squaring arm.
ON DEMAND: manual blade gap adjustment connected to a handwheel or motorized NC adjsutment, pneumatic sheet support, sheet eject and pile-up systems, sheet front feeders, NC 2 axis and other optionals for every cutting exigence.
|
|
DIRECT-DRIVE GUILLOTINE SHEARS
CAPACITY RANGE
RGS 1560x3.5 mm
RGS 2060x4 mm
RGS 2560x4 mm
RGS 3150x3 mm
MAIN FEATURES
- All steel-plate welded construction
- Noise-free, direct drive system with brake motor
- Rigid cutting beam working inside roller bearings and bronze guides
- Precise blade adjustment from top beam
- Mechanical sheet clamping system
- Simple blade-gap system working on slides
|
|
Guillotine Shears with Reducer ( 4 mm cutting capacity )
Standard Equipment
Motorized Back-Gauge with 750 mm stroke
Squaring Arm with T slot , ruler and Stopper
Foot Pedal
Front Sheet Holding Arms
Protection Cages
Optional Equipment
Cutting Unit Counter
Safety Module
Back Gauge with NC Control
Cutting Line Illumination
Pneumatic Thin Sheet Support System
|
|
Guillotine Shears with Reducer ( 3 mm cutting capacity )
Models : RGM 1350-3 / RGM 2050-3 / RGM 2550-2,5
Standard Equipment
Manual Back-gauge with 560 mm strok
Squaring Arm with T slot , ruler and stopper
Foot Pedal
Front Sheet Holding Arms
Protection Cages
Optional Equipment
Cutting Unit Counter
Safety Module
|
|
Cutting length from 800 to 2550.
Cutting Thickness up to mm 10.
Materials: sheet, plastic, cardboard and
electrowelded net.
|
|
|
Whether you choose a fixed angle notcher or a variable angle notcher, by adding the optional Multi-Station you can greatly increase the variety of tasks and shapes your jobs require (notching, punching, bending, radiousing).
|
|
Punching station:
- A quick change tool holder model Trumf, Rainer or Fim production model.
- Neck depth: 300 mm
- Punching machine: 20 Tonnes
- Electronic device to reduce the down stroke speedness and let the operator carry out even complex workings like small bendings and deformations.
- An optional special adapter to house bending tools up to a maximum length of 415 mm or 830 mm.
- Brass scales for the two axis reading.
|
|
SIMASV NOTCHING MACHINES WITH FIXED AND VARIABLE ANGLE
AF258P
The fixed angle notching machine AF.258/P is prearranged for the mounting of the punch head.
The shearing head is mounted on rigid columns to prevent load oscillation of the head during the punching phase. However, during the notching phase the shearing head must be able to oscillate in the four directions to allow the auto-adjustment of the upper blades with respect to the lower ones. For this purpose two locking levers are set to the rear of the machine with the function of blocking or unblocking the head depending on whether the machine is punching or notching.
AV226PA
The auto-adjustment patented system between the upper and the lower blades allows simultaneous cutting of different thicknesses.
The AV/PA version is predisposed for the mounting of a punching head for carrying out drilling, beading, nibbling, shutter slits, straight cuts and so on. There is also the option of activating the cutting or punching unit via the special reversing button.
The cutting capacity of variable angle notching machine is of 6 mm. thickness, and the cutting angle can be adjust from 30° to 140°.
Subject of a Simasv patent, the most important characteristic of the variable angle notching machine AV.226/PA is the automatic adjustment of the slack between the blades from 1 to 6 mm in thickness. The cut may start from the tip or the base of the blades, and the auto-adjustment system between the upper and lower blades allows simultaneous cutting of different thicknesses. The machine is equipped with hydraulic blade blockage.
|
|
As the leading manufacturer of machines for processing aluminium and PVC profiles, we supply matured solutions for different applications.
You have profile - we cut it !
Further saws, like Table saws, Mitre saws, Double mitre saws, Notching saws, Vee-notch and cut off saws, Automatic saws and Automatic saws with pusher cover our product range.
|
|
MAIN FEATURES AND PRINCIPAL EQUIPMENT
- Rigidly constructed lower frame, work table, and cutting beam
- Easy setting of notching angle by two hand wheels (HKA models)
- Automatic blade gap adjustment for all sheet thicknesses
- Squaring guides with scales and angle gauge
- Self-lubricating, precision guides for burr-free cutting
- Extended work table with t-slots
- Footswitch operation
- Thermic-magnetic on/off switch with CEI and EMPI conformity
- Scrap collection drawer
|
|
Multicyl offers a series of cylinders and cages which are designed to provide an affordable, safe, and efficient production option for tube notching. With few exceptions, tube notching is usually performed with a short stroke Multicyl powering tooling with an internal mandrel which punches from the inside out. Although many notch profiles are possible to punch with a Multicyl system, by far the most common is the right angled cope notch in either round or shaped tubing. The most popular way to achieve this is to use standard two hit notch tooling which is available from Multicyl or most unitized tool shops.
Combining this type of tooling into a Multicyl system creates a work station
in which the operator first notches one side then inverts the tube to notch the opposite side. The speed and simplicity of Multicyl allows the operator
to complete the part in about 4 seconds.
In cases where the part volumes are high we can offer a second tube notching alternative; the double notch system. This notching option uses a tooling system designed for use specifically with Multiyl and is custom built to suit each application. Similar to the double tube punch application, this system uses set-up of opposing Multicyls which are cycled together producing the finished part in one machine cycle, or about 2-3 seconds.
|
|
Machines for tube notching and general grinding work. Notching is performed by bringing the tube into contact with a grinding belt by means of a unique and innovative simultaneous two-directional, transverse system. The patented quick contact roller changeover system, the resulting long life of the roller bearings, and extremely rugged construction all combine to ensure optimum machining results.
Typical applications: all situations in which two tubes are to be joined. Construction of chassis and roll-bars for race cars and go-karts, construction of chairs and tables, completion of stair handrails.
|
|
|
The DALCOS® LF perforation lines are designed to produce fully punched, notched and cut-to-size panels ready for bending. They offer a high output and an excellent performance/price ratio.
|
|
MAG B : Drilling punching marking and plasma cutting machine for plates
MAG B range: MAG B 320-80, MAG B 320, MAG B 620, MAG B 1225
Efficient, easy to run and flexible machines for plates
Compact line for complete machining (drilling, punching, marking and plasma cutting) of middle and high thick plates in one handling
The purely software-based solution is a new approach in which a processor carries out all automation tasks within a single-processor mode. The PC software is used for processing PLC and NC tasks.
|
|
The automatic plate systems are suitable to process heavy steel plates with a thickness up to 40 mm.
The CNC controlled plate processing machines are able to punch, drill, tap, centre point, deburr and mark heavy steel plates automatically.
V250 Plate punching system
The V250 plate punching system is consists of a hydraulic triple punching machine and a X-Y table with hydraulic material clamping. A drilling unit, an automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the drilling unit, steel plates can be provided with holes, which cannot be punched, due to the material thickness restrictions.
V200 Plate drilling system
The V200 plate drilling system consists of a CNC-controlled vertical drilling unit and a X-Y table. With the V200, steel plates, pre-cut to a certain dimension, are automatically provided with holes and screw taps. The X-Y table has a double hydraulic material clamping system. Automatic tool changer, a numbering unit and a deburring unit can be added to the machine as an additional extra. With the deburring unit the drilled holes will be deburred automatically from the underside.
|
|
The SpeedPunch punching center from coil closes the gap between hard tools and punching/nibbling machines. It offers blinding speed combined with maximum flexibility.
The SpeedPunch comes with punching cassettes that can be loaded with thick turret tools in sizes A thru D. A total of 27 tools can be loaded in the cassette at a time. The coil material can be up to 500 mm wide and the line is able to process coil material from 0.5 mm up to 2 mm thickness.
In addition to the 1200 strokes per minute for nibbling there are three other factors for high-speed production. First, all axes are driven with two times the earth's gravitational acceleration. Second, the punching cylinder with 150 kN punching force can reach each tool within milliseconds. All tools are in a ready position at all times. Tool change time therefore is nearly zero.
Third, the material moves in one direction only. The tools and also the punching cylinder move to the programmed punching position in a fraction of a second and fires the punching stroke. In the perfect interaction of highest accelerations, fastest tool change and optimal material handling the SpeedPunch offers an amazing amount of features and benefits to the end user.
|
|
Cold heading die nibs
- short delivery for special dimensions,
- close to finished dimensions to reduce grinding,
- different grades for different applications.
Semi fnished cold heading die nibs,
- consistant in metalurgical and dimensional properties,
- keeps your production flexibel, fast, and secure.
Finished cold heading dies and tools,
- tailor-made high performance tools due to many years of experience
|
|
This punching machine by Dalcos works starting from the coil or from pre-cut strips.
In this way we can be very productive (coils) or very flexible (blanks).
|
|
X-TRIM
GASPARINI is offering the user of an X-TRIM punching machine an innovating concept. The unique characteristics of the X-TRIM punching machines meet the demands of the actual and future modern plate working industry.
The X-TRIM program is characterized by:
- User-friendliness for loading, programming, mounting the tooling.
- A simple machine-concept without accepting compromises for productivity and reliability.
- An optimal price/quality relation which translate itself into a profitable investment.
The introduction of the X-TRIM program of punching-nibbling machines is both remarkable and logical.
For many years Gasparini has been offering to their customers all over the world the maximum of the technology and the best solutions in the field of sheet working.
Starting from this experience, X-TRIM project was born, consisting in modern and new-generation punching machines.
|
|
We can offer a full range of CNC Punching Machines, from low-cost single head machines to fully indexable turret punching machines.
All of the HACO punching machines realize the shortest production times with a minimum number of tools, due to the high-speed hydraulic punching heads (up to 1,500 hits/minute) and the use of Multitools and/or rotation of all tools.
All of our hydraulic punching heads are in-house developments with fully CNC controlled stroke and speed.
In case of a turret punching machine, the turret can have up to 30 tool stations, all indexable ! The use of MultiTools increases the flexibility of the machine even more.
For tighter budgets, HACO offers a range of CNC high-speed single head machines with hit rates of 200 or 600 hpm, and manual or semi-automatic tool change. Productivity guaranteed ! Their price/quality ratio turns your investment into profits in no time;
To increase productivity, we can offer loading/unlading systems for sheets up to sizes of 3000 x 1500 mm and 6 mm thickness.
|
|
|
|
Shearing machines, Punching machines
