|
|
Our most popular Knee Mill, combining the patented MillSlide® with our Centurion control, is one of the largest and most powerful Knee Mills in its class!
Oversized 4.125" quill with #40 taper
7.5 HP spindle with back gear
Patented MillSlide® construction offers a robust solution to Z axis travel without compromising manual quill operation
Fully programmable direct drive spindle offers higher spindle speeds, smoother operation and lower maintenance costs
Adjustable ram increases machine "throat" offering large machine capabilities at a small machine price
Rigid tapping available as an option
DRO operation in manual mode
Conversational programming
"Skill Level Select" software
Manual teach
Ground ball screw construction
True encoder positioning feedback
Graphic program verification
One event MDI canned cycles
Knee mills with ball screw driven quill designs are obsolete. Knee mills are for environments needing maximum flexibility. The Milltronics knee mills are simply the most exceptional knee mills ever marketed. The Milltronics patented Millslideâ redefines versatility, rigidity, and operator friendliness, and is the most innovative vertical axis solution ever invented for the knee mill. Simply stated, the Partner VK2, VKM3 and heavy duty VKM4 knee mills with the MillSlideâ are undoubtedly the very best toolroom milling machines in the world. Combined with a unique CNC system with exceptional value at low cost, we are sure you will come to the same conclusion.
|
|
PHANTOMATIC T3 A
CNC machining centre with three controlled axes, designed for machining operations on bars or workpieces made of aluminium, PVC, light alloys in general and steel up to 3 mm thick. It is provided with a 4-place tool magazine, with provision for containing 2 angle machining heads and a side milling cutter, for machining operations on the 5 faces of the workpiece. It also has a traversing work table which facilitates workpiece loading/unloading as well as considerably increasing the machinable section.
|
|
•Full guard, manual door opening
•Console on board LH side machine complete with PC FOMCAM software
•CNC controlled interpolating X, Y, and Z
•Axis sliding X,Y,Z on linear guides with high precision
•X axis movement with DC motor and high pressure reducer
•Y and Z axis movement with DC motors and drive with ground recirculating ball-screw
•Pneumatic rotation of the worktable -90° to 0 to 90°
•Worktable height 850 mm
•Pneumatic vices (n° 4) that translate along the worktable with quick positioning (without use of keys or accessories) (PATENTED)
•Dual working pressure with safety valves for profile stop
•Vices positioning readout on the workable by CN
•Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
•Software automatically corrects tool diameter and length
•Milling capacity: X=3.000, Y=250, Z=120.
•Electrospindle speed: 1000/12000 rpm, 2.2 kW
•Microdrop lubrication
•Set-up for central greasing for recirculating ball-screws and linear guides
•LH and RH profile pneumatic stop
•The profile being machined can be greater than the X milling depth (3.000 mm) alternatively using the pneumatic stops on the left and the right of the machine.
•Air working pressure required 7 bar
•Work cycle air consumption 24 Nl
•Chip bin
|
|
Description
The S33APC vertical machining center utilizes a 40 taper, 13,000-rpm spindle with the stiffness and rigidity required for hard cutting applications and the speed necessary to provide high surface quality for demanding die and mold applications. Heavy cast construction and an axis configuration with no overhangs ensures high machine rigidity, resulting in outstanding accuracy over the full range of travel. It is capable of maintaining positioning accuracies to within ±.0001 inch (.003 mm) and repeatability of ±.00008 inch (.002 mm).
|
|
|
MITSUI SEIKI High Production Machining Center Model VU65A with a 1500 mm by 600 mm Pallet. Numerically controlled with all standard equipment and features including: Automatic Tool Changer, and high production capability for drilling, boring, tapping and reaming. Integrated circuit logic, closed loop, complete electrical equipment for operation on: 3-phases, 50/60Hz, 200/220 Volts AC.
|
|
= DuraVertical 5060 =
Dura means new value in machine tools
With its "strength through simplicity" and "high flexibility and versatility,"the Dura Series offers the "confidence of stable operation" and "high-precision, high-quality machining," with excellent cost performance.
In order to meet all the requirements demanded of a machine tool, we thoroughly refined the basic functions to create a completely new machine.
This new concept machine, which takes basic performance and reliability to the highest level, will provide powerful support for our customers' machining.
Both the width and depth are smaller than conventional machines, dramatically increasing productivity per unit area.
With a basic design which completely eliminates waste and maximizes travel on all axes, we have secured a large work envelope.
This greater travel makes it suitable for a wide range of workpieces.
|
|
= MV-1003L =
With a highly rigid body and wide machining area, excellent operability is now possible.
The MV-1003 machining center aims for excellent operability. It has a rigid base suitable for large workpieces, as well as a smooth feed, a wide machining area, and high-speed, high-torque spindles. All of these allow effi cient work with no waste.
The MV-1003 produces fi ne, detailed workpiece shapes. This is a heavy-duty machine that combines fl exibility with strength.
* X-axis travel 3,500 mm (137.8 in.)
* Working surface 3,900 mm×1,020 mm (153.5 in.×40.2 in.)
* Table loading capacity 3,500 kg (7,700 lb.)
* Rapid traverse rate X-/Y-/Z-axis: 20 m/min (65.6 fpm)
* Hybrid type external chip conveyor (hinge type + scraper type with drum
filter)
(disposal to left) equipped as standard
|
|
Product Lines:
Vertical Center Nexus Series:
High Performance vertical machining center designed to provide the maximum value.
VTC Series:
Fixed table, travelling column vertical machining center available with either #50 or #40 spindle taper. Fast tool changes and high speed positioning.
Moldmaker & Super Moldmaker:
Double column Machining Centers for high precision dies and molds.
FJV Series:
High accuracy and high rigidity vertical machining centre featuring double column construction.
Mazatech V Series:
Column feed vertical machining centers.
Versatech V Series:
Large double column vertical machining centers which can machine all 5 faces in the same workpiece setup by automatically mounting a right angel head to the main spindle.
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
R1, the new vertical machining center, equipped with a cross table, is the expression of the Serrmac evolution could reach applying the latest and most advanced technologies, in order to improve the performances of the machine and to satisfy the requirements of a production which has to be particularly effi cient for precision and reliability.
X axis 460 mm-Y axis 370 mm-Z axis 420 mm with a Working surface 600 x 350 mm; Max spindle power 5.5 kW, Max spindle speed 10.000 rpm and Rapid feed 30 m/min.
R1 model is aveileble in two version: Tool storage with nr. 12 tool positions and Wheel tool storage with nr. 16 tool positions, RANDOM type selection and with double-grip.
The control board is installed on the right side of the machine and there
are located all the elements of control: alphanumeric keyboard, CNC 10,4”
video color with graphic to visualize the different machining programs, alarms and machine messages, all the manual controls.
|
|
The Univers 4000, at the entry level of the Unisign range of vertical machining centres, is a very flexible and reliable vertical machining centre which offers powerful and accurate machining at a very competitive price. Typical features are the extended Y- and Z-axis of respectively 600 and 500 mm and the upgraded spindle of 26 kW (S1-100%) and 12.000 rpm.
The Univers 6 has gained the reputation of an extremely flexible and reliable machining platform that, due to its flexible design, has found numerous applications throughout the metalworking industry. The vertical clamping front, which has become a trademark for the UNIVERS machines, enables the integration of very specific features such as customer specific fixtures, horizontal and/or vertical rotary tables as A-, B- or C-axis, etc. The right angular head with automatic tool change offers multi-sided machining capabilities.
The Univers 6 C-1 is based on the very successful Univers 6 and is equipped with carousel turning station for components up to approximately Ø 1.000 mm x 400 mm.
The Univers 6 C-2 is similar to the Univers 6 C-1 but with two work zones to enable pendulum machining. Each work zone can be equipped with a carousel turning station.
|
|
A huge machining space allows for multiple-part machining and machining of large parts. The massive steel frame filled with vibration absorbing concrete serves as mounting surface for many different spindles. Designed for aluminium and massive steel machining.
Typical application examples
. Oil pans
. Converter housings
. Crank cases and cylinder heads
. Rear-axle housings
. Valve bodies
. Engine and cylinder head covers
. Differential cases
. Camshaft and crankshafts
. Wheel carriers
. Transmission cases
. Oil- and water pump housings
. Cross beams
Specification HCX 2000
. Travel X/Y/Z/a/B: 550/2000/550 (mm) /±200°/360°
. Work piece size: max. 550 x 550 x 550 (mm)
. Work piece weight:max. 450kg
. Repeatability X/Y/Z/a: ± 1,5 µm
. Feed rate A/B axis: max. 24.000°/min
. Feed rate X/Y/Z axis: max. 90m/min
. Spindles: up to 120 (on basis of MFK)
. Chip-to-chip-time: from 0,3 sek
. Spindle power : 1,5 kW bis 50 kW per spindle
. Spindle rpm : 100 - 36.000 U/min
(depends on project) optional up to 200.000 U/min
. Control: Siemens, Fanuc
. Length/width/height: 7.750/3.500/3.500 (mm)
. Weight: ca. 25 t (depends on project)
|
|
The advanced machine design of the DMC 35 V series delivers superb quality at an unbeatable price. The series comes standard with the most requested features like a 10,000 rpm motor spindle, 20x-tool magazine with double gripper, high rapid traverse speeds and high-tech controls with 3D-software. With spindle speeds up to 18,000 rpm, high dynamics and excellent sturdiness, the DMC 64 / 104 V linear suitable both for high volume chip removal and machining in the tool and mould sector. The tool magazine with 30 pockets and fast pick-up tool changer for setup parallel to production time lead to minimal idle times and delivers top productivity.
|
|
VX Simple and efficient
Machines with vertical spindle suitable for machining work pieces in small and medium series. The VX centres ensure a return on investments very fast !
A simple concept for high performances ! Compact, ergonomic, powerful and precise, the vertical centres HURON VX offer an excellent profitability for operations such as milling, drilling, boring and tapping in the sectors of tooling and production in small and medium series.
VX 10
XYZ 1.020 / 510 / 510 mm
1.200 x 500 mm / 800 kg
8.000 rpm - 16,5 kW
XYZ = 24 m/min
|
|
New structure, next generation type machine center
New type machine with the features of both the horizontal machining center and vertical machining center.
- Because the X-, Y-, and Z-axis guides are closely positioned to the spindle, the pathway for power transfer between the spindle and JIGs is short and high rigidity is attained
- The location between fixture and spindle is same.
- Minimizes the effects of coolant and chips on the machining unit and JIG base
|
|
Main Features :
High-Precision Spindle with Low Thermal Distortion
- Stable & high-performance spindle
- Direct-driven spindle
- Jacket cooling
Loading Capacity
- Axis travels(X/Y/Z) : 1,150/550/550mm(45.3¡±/21.7¡±/21.7¡±)
- Table load capacity : 800kgf(1,764lb)
High-Efficiency & High-Productivity
- Rapid traverse : 40/40/30m/min
High-Efficiency Machining Control
- HAI(Hwacheon Artificial Intelligence)
- HECC(Hwacheon Efficient Contour Control)
- Tool overload protector
|
|
Features:
Hardened and precision ground guide-ways are Turcite-B coated. Extra wide box ways design increase contact surface area for higher stability, faster positioning and heavier cutting.
The multi-speed spindle adopts top quality German-built Z.F. dual section gear box. Fully sealed immersion type lubrication with oil chiller circulates coolant and keeps the machine running cool even at 10,000 rpm. (Optional: KMV-8VC).
The spindle runs on high precision taper roller bearings which allow for any type of heavy duty cutting without vibration.
The Z axis is balanced with Nitrogen in conjunction with pneumatic Nitrogen cushioning of the headstock for automatic balancing during vertical motion. Perfectly level and smooth action eradicates vibration. (Optional: KMV-8VC)
Lubricant is pressure fed at a volumetric ratio for even distribution at all critical points for optimal lubrication.
All three axes employ C3 grade high precision ball screws, each with dual pretension nuts and internal cooling ducts with preloaded support at both ends.
The spindle and ball screws at all three axes are cooled by re-circulated oil which passes through an oil chiller, dispelling heat deformation (optional: KMV-8VC).
The disc type system is fast and compact. Arm movement is smooth with excellent repeatability. Tool change time is 2.5 seconds (BT40).
Compatible with a variety of CNC control systems including Fanuc, Mitsubishi, Siemens, Heidenhain or Italian Selca..
Sizes available from 820 × 600× 600mm to 1600 × 815 × 815mm ( X × Y × Z ).
|
|
Vertical Machining Center :
Column Traveling Type Compact Machining Center
- Fixed table and column traveling structure are suitable for a factory automation
- Coolant and chips were flushed into the rear of the machine for central chip collection.
- The width of the machine(1,460mm,57.5..) is ideally suited for a factory automation
|
|
Optionally with Fanuc Control 0i-MB
Siemens 802D control
optionally with Fanuc OMD control
easy and comfortable operation
high-quality components for maximum reliability
linear guideways
rapid feed up to 950”/min.
16-station pneumatic tool changer
|
|
MCV300
Travel
X-Axis 610 mm(24")
Y-Axis 305 mm(12")
Z-Axis 460 mm(18.1")
Spindle nose to table 70 - 530 mm(2.8-20.9")
Table
Table size 700 mm X 308 mm(27.6-12.1")
Floor to table 835 mm(32.9")
Max. table loading capacity 350 kgs()770Lbs
T-slot (no x Width x Pitch) 4 X 16 X 63.5 mm ( 4 X 0.6 X 2.5 inch )
Spindle center to column 415 mm(16.3")
Feed system
Rapid traverse speed X/Y: 20 M/min ( 787.4"/min) , Z:18 M/min (708.7"/min)
Feed motor(FANUC) X/Y: 1.2kW (8Nm) , Z: 1.8kW (12Nm)
Ball screw diameter & pitch 32 mm / 10mm (1.3" / 0.4")
Cutting feedrate 1-10,000 mm/min (0.04 - 393.7")
Type of transmission X/Y/Z%uFF1ADirect mounting
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 5.5 / 7.5 kW / 7.5 / 11 kW (Op)
Type of transmission Belt
|
|
Vertical Machining Centers V.Plus / R.Plus Series
V.Plus-550
Travel:X/Y/Z mm (in.) 550 / 410 / 460 (21.65 / 16.14 / 18.11)
Working Surface mm (in.) 860 x 400 (33.85 x 15.74)
Loading Capacity kg (lb.) 400 (880)
Rapid Traverse:X/Y/Z m/min (ipm) 36 / 36 / 30 (1,417.3 / 1,181.1 / 1,181.1)
R.Plus-550
Offering twin pallets for enhanced productivity on the V.Plus-550 .
R.Plus-800
Offering twin pallets for enhanced productivity on the V.Plus-800 .
|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T-Slots
Automatic lubrication
Spindle cartridge cooling system
35HP closed loop spindle motor with two-speed gearbox
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM rapid traverse
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
Machining center with numerical control 3 or 4 axes.
Innovating and easy to use thanks to its touch screen and its assistant
Machine compacts for an obstruction minimal
Optimized ergonomics: door of frontal access with integrated staircase
door of side access to the store
Store of tools 32 sites!
Races: 3105 mm X 1640 mm X.400 mm
|
|
BZ 6000
The BZ is designed for machining long, heavy workpieces and offers
all production possibilities of a modern CNC-machining centre. The
sturdy layout even allows the machining of stainless steel.
|
|
Travel
- X-axis travel (Longitudinal movement of table): 1500mm
- Y-axis travel (Vertical movement of spindle head): 1200mm
- Z-axis travel (Cross movement of Column): 1100mm
Table
- Table working surface: 1000x1000mm
- Table loading capacity: 5000kg
Spindle
- The highest revolving speed: 10000min-1 [15000min-1, 18000min-1]
- Spindle taper hole: 7/24 taper,No.50(BT50)
Automatic tool changer
- Tool storage capacity: 60 tools[90-450]
APC/PLS
- The number of palettes: 2nd page / [5th page ]
NC equipment: FANUC 31i-MODEL A5
|
|
|
The structure is made of a machine bed with a sliding carriage in its rear section. Both are in electrowelded steel duly stabilized after each work phase to ensure that there is no interior tension; they are sized to guarantee stability and precision during machining operations.
|
|
Description
MAKINO's V-series which has been developed especially for the mold construction offers an extensive performance spectrum and a multitude of constructive solutions. These guarantee permanent process stability and accuracy and the best quality surface finish.
The machining centres of the V-series are distinguished in particular by the rigidity and stability of the components, its outstanding damping properties and the uncompromising design of the machine structure. MAKINO sets new standards for the modern mold construction.
Constant developments in technologies are the basis for fulfilling the requirements of the mold construction with the highest quality of production.
|
|
|
Vertical milling machines, Vertical machining centers 
