|
|
DATRON M10 Power
The most powerful HSC machining system from DATRON!
The DATRON M10 Power machining system combines productivity, flexibility of use and a large work area and requires little floor space. With a high manufacturing quality and low costs per piece, this machine will put you a significant step ahead of your competitors.
|
|
CFV 1300
MAG Cincinnati's new generation of CFV (Cast Frame Vertical) machining centers enable you to produce more parts, more accurately and more profitably. Constructed for rigidity, power and efficiency, the CFV platform delivers smoother finishes, shorter programming and set-up times and new possibilities to increase your bottom line.
The CFV 1300 is the largest machine in the CFV family, making it ideal for the machining of long parts to take advantage of its 1370 mm long worktable. It is also great for multiple setups to increase profitability.
|
|
The entry level machine (XR 1500) has a 10,000rpm, 30kW (40.2hp) 40 taper SKF belt-driven spindle. Faster spindle speeds are available on the more advanced (XR 1500 HP) model which provides users with 15,000rpm from its 30kW (40.2hp) 40 taper SKF directly-driven spindle. And the last model in the range is the XR 1500 HPD - a real powerhouse of a machine - that comes with a ZF two-speed gearbox and achieves 7,500rpm and 764Nm torque (557ft-lb)from its 30kW (40.2hp) 50 taper SKF belt-driven spindle. All spindles are specified with face and taper capability.
|
|
Functions
Stable spindle with high speed & high accuracy
- Cartridge type spindle : #40, 10,000rpm / #50, 8,000rpm
- High performance spindle Direct-driven motor
- Jacket cooling system
High rigid frame : Box type
- Excellent ability to absorb vibration and shock
- 4 rails on Y axis : High performance during heavy duty cutting
Reduced idle time
- The best rapid speed in class : 30m/min
High accuracy & efficiency machining control
- HAI(Hwacheon Artificial Intelligence) - Std.
- HECC(Hwacheon Efficient Contour Control) - Std.
- Tool overload protector - Opt.
|
|
The "P" Series two and three axis VLTs are heavy duty general purpose tools for machining metallic chips to an extent up to 472 Inches in diameter Auxiliary units for milling and drilling are also available. To better meet all sorts of usages, the makes in the "P" series are available in two different makes:
_ "High Speed"
Oblique Turning spindle. Two speed gear box with belt transmission.
_ "Heavy Duty"
Lower gear transmission. Two speed gear box tooted gear positive transmission.
In both versions
Hydraulically controlled vertical "2" axis. Cast iron slides with buitt-on hardened guides.
|
|
|
|
|
|
VMC 4525, VMC 6030 and VMC 8030 are designed for machining large parts. With these machines, large parts can be easily loaded on the table from the front or side doors.
The MAG Fadal VMC 4525, with XYZ travels of 45"(1,143mm) x25"(635 mm) x24"(609.6mm) and 53.5" (1,359mm) x 25" (635mm) table, is a robust machine with heavy cast iron construction. Included is a high torque spindle, that reduces cycle time for heavy cutting operations including steel.
The MAG Fadal VMC 6030 provides additional work space for large parts.|
The cutting envelope of this machine is 60" (1,524mm) x 30" (762mm) x 30" (762mm) for axes X, Y and Z and easily allows larger 4 and 5 axes rotary tables to function within the spacious machining cube. Deep molds are a popular application for this machine and if needed, extended Z options are available.
The VMC 8030 VMC is suitable for large and long part producers. Machinists can rough-out material fast then execute final passes for smooth and accurate finish parts.
The work envelope is 80"(2,032 mm) x 30" (762mm) x 30" (762mm) in X, Y and Z axes. Optional extended Z travels are available should your applications demand.
|
|
M5 - LINEAR DRIVE , It's a new VERTICAL MACHINING CENTER TRAVELLING COLUMN with linear motor Fanuc on X axe.
This machine can be used also in pendular configuration permitting maximum capabilities as well as a X axis travel of 875 mm on both working area.
Moreover, the ‘M5’ machine is equipped with two indipendent tool storages having 30 tools capacity everyone.
X axis travel 2.200mm
Y axis travel 600 mm
Z axis travel 640 mm
Table Working surface 2400x600 mm
Max loading capacity 6000Kg
Electro-spindle speed 12000 rpm (15000-24000 opt)
Max electro-spindle power for 30 min/continuous 35 - 22.5 kW
Max electro-spindle torque 120 Nm
Axes characteristcs Rapid feedrate (x-y-z) 60 m/min
Work feedrate (x-y-z) 60 m/min *
|
|
KX The Classic HURON
As far back as 1993, Huron presents a very innovating concept of high speed multiaxes machines. KX milling centres have been launched in 1998, portal type and mobile table with 3 axes.
Applications concerned are moulds, cutting tools and machining of models, prototyping and complex pieces.
These machine-tools allow an important swarf removal in roughing, a very high precision in contouring and a high quality in surfacing.
KX 10
XYZ 1.000 / 700 / 550 mm
1.250 x 700 mm / 1.500 kg
18.000 rpm - 35 kW - 120 Nm
XY = 30 m/min - Z = 18 m/min
|
|
DATRON M8 XL - 1600
Large-Format
Machining System
The machining system M8 XL-1500 is specially designed for the precise machining of large-format workpieces. The useable traverse path is 1,020 mm x 1,500 mm with a floor space of 1,850 mm x 2,400 x 1,950 mm. The solid vibration-damped construction with precision linear guides is the basis for high production quality, even whilst machining at high speed. The large swing doors at the front and rear side of the machine enable easy loading of the machine.
|
|
DATRON M7
The new DATRON machining system M7 will substantially increase your machining speed and quality. With a floor space of only 1300 mm x 1300 mm this compact machine offers a traverse path of 520 mm x 650 mm x 240 mm. The solid Granite construction ensures very dynamic CNC milling and at the same time high surface quality. Robust high-torque machining spindles or precisions spindles up to 60.000 rpm are available, tailored to your application requirements. With this compact and low-priced “power house” the precise ma-
chining of Aluminium and Plastics in 2D or 3D can now be carried out much more effectively and economically.
|
|
CFV 550
MAG Cincinnati's new generation of CFV (Cast Frame Vertical) machining centers enable you to produce more parts, more accurately and more profitably. Constructed for rigidity, power and efficiency, the CFV platform delivers smoother finishes, shorter programming and set-up times and new possibilities to increase your bottom line.
The CFV 550 offers high precision machining in a very compact footprint, ideal for small parts or small set-ups.
|
|
|
|
|
|
MiniMod® CNC Machines are desk top machines for a variety of branches and applications at a favorable price-performance ratio.
Especial suitable for the following application areas:
* Optics
* Jewelry Industries
* Engravers
* Goldsmiths
The basis is a a sturdy aluminum steel frame with linear units. The clearance free ball screws used in the linear axes ensure high precision, accuracy and smooth running.
MiniMod®-CNC machines are available as compact units in 4 standard sizes with traverse paths of
X = 300 mm,
Y = 200 / 400 / 600 / 800 mm,
Z = 150 mm
in an open design and with a traverse path of Y = 200 mm in a closed design (with protective cover).
The linear units with stepper motors are ideally adjusted to the control and the software. The stepper motor controller of the MiniMod® with safety circuit is located in the right inductor.
The M series contains the Step Controller iMC-M, the P series the Step Controller iMC-MP. (refer to section “Controls”.)
Operation is done from the front with function keys.
For all CNC machines (standard color: grey) extensive accessories and software applications as well as designs with other traverse ranges are available.
Applications
MiniMod®-CNC Machines are the basis for the set-up of machines for:
* Drilling and milling
* Assembling and mounting
* Imprinting and engraving
* Metering and fastening
* Buring and polishing
* Forming and modeling
* Bonding and casting
* Soldering and welding
* Measuring and testing
* Scanning
... etc.
|
|
self-center SCV-915
Vertical type, spindle tape No.20, column-traverse compact machining center. It is the best suited for high-speed and high-precision machining of small workpieces
Features
- Main spindle of 17,000 min-1 as standard and 20,000 min-1 optional.
- Main spindle acceleration time and feed axis acceleration/deceleration times are greatly enhanced.
- Pallet changes using the turn table is also available.
|
|
|
|
|
|
Quick, precise, compact, and as multifaceted as your manufacturing tasks
The machining centres of the CHIRON 08 MAGNUM series are among the most versatile machines in the compact category.
These high performance centres are quick to set up, easy to operate, very stable, highly dynamic and low-maintenance. With a chip-to-chip time as fast as 1.3 s, axis acceleration up to 2 g, and spindle speeds up to 40,000 rpm, these machining centres are setting records in productivity per unit area.
With its modular design, and numerous configuration possibilities, every FZ 08 MAGNUM basic machine can be customized into a perfect solution for your requirements.
Basic design – vertical and compact for high productivity per unit area
Design related advantages:
- I Simple, robust basic structure
- Vertical moving column principle
- Low maintenance and long lasting
- Compact design for high productivity per unit area
- High rigidity and thermal stabilityI Digital direct drives and guides outside the work area
- High running, positioning and long-term precision
- Fully enclosed work area
- Protective covering made of stainless steel
- Easily viewable and accessible work area
- Smooth, steep walls for ideal chip fl ow directly to the chip conveyor
- Foundation free set-up
- Service friendly access to all units
- Can be easily relocated within the plant, thanks to built-in transport wheels
|
|
Travel
- X-axis travel (Longitudinal movement of spindle head): 600mm
- Y-axis travel (Cross movement of table): 400mm
- Z-axis travel (Vertical movement of spindle head): 350mm
Table
- Table working surface: 700x450mm
- Table loading capacity: 300kg
Spindle
- The highest revolving speed: 24000min-1[30000min-1]
- Spindle taper hole: 7/24 taper,No.40(BT40)
Automatic tool changer
- Tool storage capacity: 30 tools[40 and 60]
APC/PLS
- The number of palettes: [2nd page] / [5th page]
NC equipment: FANUC 31i -MODEL A5
|
|
|
|
|
|
Electronic :
Charlyrobot CNR3 micro-step digital control.
3 to 5 interpolated electronic axes.
Communication: serial RS232
Power supply 240 volts or option 110 volts single phase + earth
Installed power: 2KW with HF spindle 1.1 KW.
Drive :
Stepped motor, micro-step management.
Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
Guides by prismatic rails with ball recirculation shoes on X and Y.
Protection of axes by lip seals on X, Y and Z.
Greaser on guide shoe and drive ball screw bushing.
Options :
Microlubrification
Floating suction sensor in Z, for 2D application only.
Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
Safety :
Integral cover with 180° vision, very bright.
Compliant with the European Directive "machine n° 98/37/CE".
"Punch button" type emergency stop.
Cover opening detection.
Electromagnetic cover locking, controlled by the spindle
|
|
|
|
|
|
Electronic :
Charlyrobot CNR3 micro-step digital control.
3 to 5 interpolated electronic axes.
Communication: serial RS232
Power supply 240 volts or option 110 volts single phase + earth
Installed power: 2KW with HF spindle 1.1 KW.
Drive :
Stepped motor, micro-step management.
Ball screw diameter 12 mm with a thread of 5 mm on X, Y and Z.
Guides by prismatic rails with ball recirculation shoes on X and Y.
Protection of axes by lip seals on X, Y and Z.
Greaser on guide shoe and drive ball screw bushing.
Options :
Microlubrification
Floating suction sensor in Z, for 2D application only.
Standard 600 W spindle with speed converter by mecanical potentiometer on the spindle. Rotation of 8000 to 24000 rpm. Maximum tightening diameter of 8 mm.
High frequency spindle 1.1 KW without tool changer with electronic frequency converter controlled by potentiometer on the front panel. Rotation of 6000 to 24000 rpm, EX20 collet with maximum tightening diameter of 13 mm.
4th axis (brushless).
Bushless servo motors with CNR3 digital control, 3 axes extensible to 5.
Vaccum table.
Safety :
Integral cover with 180° vision, very bright.
Compliant with the European Directive "machine n° 98/37/CE".
"Punch button" type emergency stop.
Cover opening detection.
Electromagnetic cover locking, controlled by the spindle
|
|
Traveling Column Series
Gain Productivity and Increase Flexibility.
MAG Cincinnati's Traveling Column Series of machining centers are modular in design to provide flexible solutions. The X-Y-Z machine axes are behind the spindle to provide highly efficient processing with virtually no restrictions on workpiece weight or size.
|
|
FJV series Double Column Machining Centers
These high-accuracy, high-rigidity vertical machining centers feature double column construction. They all have high performance spindles and are available with a wide range of table sizes up to 3000 x 2000 mm (118.11" x 78.74") which is required to machine large size liquid crystal panel production components.
|
|
|
M4- The versatility of the machine structure of the series M made SERRTECH the realization of the model for M4 possible with a Verfahrweg on the x axis of 1650 mm. This processing center permitted by the option „TREATMENT OF PENDULUMS “which of an additional unabähngigen tool shop with 30 tool places and a partition wall consists, the treatment in the pendulum enterprise, with a Verfahrweg on both sides of the x axis of in each case 600 mm X-Y-Z axle: 1,650-600-640 mm of work surface: 1.800x600 mm
|
|
Features
- Spindle Speed-----15000rpm/20000(Option)
- X,Y Rapids 1417ipm(36m/min)
- Z Rapid 1181ipm(30m/min)
- Tool-to-tool--------0.8scs
- Table Index---------2scs
- All three axes use self-grease -lubricated guideways system, this kind of lubrication system can protect environment as there is no used oil disposal problem.
- To increase the safety during machining, the machine base is one-piece casting with slope design and equipped with large volume coolant flow surrounding the machine base for fast chips removal
|
|
|
Uniwin is the latest generation Multicentre made in Biesse for the production of standard and special doors and windows. This Multicentre combines the technology of machining centres, angular plants and integrated systems while at the same time reducing piece handling time, machining time, overall dimensions and power consumption.
|
|
|
|
|
|
- VENUS -
The quick fixed bridge machining centre; very accurate and sturdy, it proves to be the ideal solution for the machining of small 3-5 axis batches in a pendular cycle. Designed for meeting any flexibility request, it offers wide application possibilities considering it compact size.
- Speed and accuracy -
The fixed bridge single-piece frame, the motion mechanisms appropriately sized for heavy-duty working loads, the high-performance digital axis and the electrospindle power contribute to guaranteeing high machining speeds in combination with positioning accuracy and finishing quality.
Venus can be configured with a wide range of operating units. The RX4 operating unit emphasises its work field width and the machining speeds. It can also be configured alternately with the 5-axis PX5 unit or the 3-4-axis TX3 operating unit.
The work table is available in the steel version with universal T-shaped guides and standard vacuum system, or with special universal clamping modules, for an immediate work table setting.
- Safety and protection -
The protection cabin and the extraction stroke of the work tables, which completely protrude from the cabin, make the workpiece load/unload operations very safe and isolate the work table (dust and chip ejection) for the total benefit of the surrounding environment.
|
|
FLEXDOOR 7000 machining centre make it possible to machine large daily amounts, even if manufacturing batches are reduced and customised. The FLEXDOOR 7000 enables machining or hardware installing on frame stiles, into a common machining line or two specialised lines "locks" and "hinges" The FLEXDOOR 7000 digital control enables high flexibility to be reached while maintaining a very high productivity. The machines also allow pins, hinges or keepers to be installed.
|
|
Designer and manufacturer of CNC machining centres for over 20 years, dubus has gathered in a number of fields a knowledge which makes it a market leader.
The CND 2000 SL allows satisfying various requirements such as machining and customising doors, joinery or stairs, and generally the machining of any large size parts of various materials.
Various equipment possibilities are available to customise the work surface and the CND 2000 SL machining unit so as to adapt it to your specific needs. For some applications, the CND 2000%u2008SL can be connected to your CAM using a DUBUS software enabling file recovery and machining programmes automatic generation.
|
|
|
The AZ150L rs a high-accuracy and high-efficiency vertical machining center that machines small-sized-parts wrth nano level accuracy, ft is equipped with counter balance axes to eliminate machine vibration. The AZt 50L can perform excellent and high accuracy machining tor both surface finish and profiles.
|
|
DATRON M75
Affordable CNC milling machine M75
With a footprint of only 1,300 mm x 1,300 mm, this compact machine is equipped with a traverse path of 520 mm x 650 mm x 240 mm. The massive granite structure allows for dynamic CNC processing with high surface quality. Equipped with a robust 1.2 kW HF-spindle and a 10-fold tool changer allows precise milling at low cost.
|
|
Ronin
One of the most important characteristics of RONIN is that of integrating the column in a unique monolithic structure with the longitudinal sliding saddle (X axis).
The result is exciting under all points of view. RONIN differs itself from all competing machines for its qualities of utmost stiffness, of dynamic feedback, for its capabilities to perform extremely heavy machining with high powers, high accuracy machining, as well as for its finishing quality.
|
|
Equipped with the most modern of drive and control engineering, the HAMUEL portal milling machines make it possible to maximise productivity and enable the greatest possible flexibility in processing of:
- steel
- cast materials
- fine zinc alloys such as ZAMAK, KIRKSITE etc.
- aluminium
- brass alloys
- plastics such as UREOL etc.
- wood
These machines are mainly used:
- aerospace industry
- automotive industry
- model and mould making industry
- mechanical engineering industry
- tool-making industry
- contract production
Machine specifications:
The specification depend exclusively on the customer's requirements, the machining centres in GANTRY design are availble for large parts or finished body shells. The working travel X is variable according to the customers's needs.
|
|
|
|
Vertical milling machines, Vertical machining centers 
