|
|
|
Hardinge is proud to offer The Bridgeport EZ Vision Automated CNC Mill. EZ Vision is a 2 or 3 axis control that comes factory-fit (not retrofit) with power feeds on the Series I Standard Mill. The control is easier to operate than a conventional CNC, and far more productive than manual machining. The 2D contouring capability lets you machine angles and radii without a rotary table. It offers tremendous time-savings on repetitive work like bolt hole circles. Batches, and "one-off" jobs go faster and setup time on repeat batches is greatly reduced. A 3rd axis option is available to further enhance the machine's productivity.
|
|
|
|
|
|
Our most popular Knee Mill, combining the patented MillSlide® with our Centurion control, is one of the largest and most powerful Knee Mills in its class!
Oversized 4.125" quill with #40 taper
7.5 HP spindle with back gear
Patented MillSlide® construction offers a robust solution to Z axis travel without compromising manual quill operation
Fully programmable direct drive spindle offers higher spindle speeds, smoother operation and lower maintenance costs
Adjustable ram increases machine "throat" offering large machine capabilities at a small machine price
Rigid tapping available as an option
DRO operation in manual mode
Conversational programming
"Skill Level Select" software
Manual teach
Ground ball screw construction
True encoder positioning feedback
Graphic program verification
One event MDI canned cycles
Knee mills with ball screw driven quill designs are obsolete. Knee mills are for environments needing maximum flexibility. The Milltronics knee mills are simply the most exceptional knee mills ever marketed. The Milltronics patented Millslideâ redefines versatility, rigidity, and operator friendliness, and is the most innovative vertical axis solution ever invented for the knee mill. Simply stated, the Partner VK2, VKM3 and heavy duty VKM4 knee mills with the MillSlideâ are undoubtedly the very best toolroom milling machines in the world. Combined with a unique CNC system with exceptional value at low cost, we are sure you will come to the same conclusion.
|
|
DATRON M8
Versatility
Benefit with DATRON's CNC machining system M8 from our many years of experience in the specially economic and top-quality machining of Aluminium and Plastics!
A large machining area and high precision -
the M8 system completes the range of machining systems offered by DATRON when higher requirements in milling efficiency and precision are on the agenda.
With the know-how of more than one thousand installations world-wide, DATRON will offer you the security and quality of technically-mature production solutions for your machining tasks.
|
|
|
The EMCO FAMUP MMV LINEAR DRIVE floor-type CNC machining center with linear drives for the X and Y axes. A quantum leap compared to conventional drive technologies. Rapid-motion speeds of up to 60 m/min (2362.2 ipm) -with much greater precision. And the linear drive system works virtually without wear. The MMV LINEAR DRIVE series is designed specifically for machining large work pieces. Both the machine's structure and its dynamics are totally untroubled by heavy work pieces: The MMV LINEAR DRIVE series shines when rough machining is required, thanks to its outstanding cutting performance. When doing fine machining at very high speeds, the linear drive ensures that the machines achieve top precision and best surface qualities.
|
|
PHANTOMATIC T3 A
CNC machining centre with three controlled axes, designed for machining operations on bars or workpieces made of aluminium, PVC, light alloys in general and steel up to 3 mm thick. It is provided with a 4-place tool magazine, with provision for containing 2 angle machining heads and a side milling cutter, for machining operations on the 5 faces of the workpiece. It also has a traversing work table which facilitates workpiece loading/unloading as well as considerably increasing the machinable section.
|
|
|
|
|
|
•Full guard, manual door opening
•Console on board LH side machine complete with PC FOMCAM software
•CNC controlled interpolating X, Y, and Z
•Axis sliding X,Y,Z on linear guides with high precision
•X axis movement with DC motor and high pressure reducer
•Y and Z axis movement with DC motors and drive with ground recirculating ball-screw
•Pneumatic rotation of the worktable -90° to 0 to 90°
•Worktable height 850 mm
•Pneumatic vices (n° 4) that translate along the worktable with quick positioning (without use of keys or accessories) (PATENTED)
•Dual working pressure with safety valves for profile stop
•Vices positioning readout on the workable by CN
•Automatic/manual tool change ISO 30 cone with cone tool-holder (6 tools)
•Software automatically corrects tool diameter and length
•Milling capacity: X=3.000, Y=250, Z=120.
•Electrospindle speed: 1000/12000 rpm, 2.2 kW
•Microdrop lubrication
•Set-up for central greasing for recirculating ball-screws and linear guides
•LH and RH profile pneumatic stop
•The profile being machined can be greater than the X milling depth (3.000 mm) alternatively using the pneumatic stops on the left and the right of the machine.
•Air working pressure required 7 bar
•Work cycle air consumption 24 Nl
•Chip bin
|
|
|
|
|
|
VMC VERTICAL SPINDLE
Haas Automation offers a wide range of VMCs - one just right to meet the demands of every machine shop.
The Toolroom Mills combine the power of CNC with the ease of manual control. Haas CNC verticals have travels ranging from 406 x 305 x 254 mm (xyz) on the Mini Mill and Super Mini Mill to 3048 x 1016 x 762 mm on the monstrous VF-11. Workpiece sizes run the gamut, too, with tables available from 305 x 914 mm all the way up to 711 x 3048 mm.
The range of possible applications is as varied as the capacities: 7,5 hp Mini Mill, 15 hp Super Mini Mill, 20 and 30 horsepower motors for the VF line; speeds ranging from 0 to 7500 rpm, with options for 10000, 15000 and 30000 rpm; and torque ratings up to 450 ft-lb. These machines are flexible enough for both high-torque, heavy-duty cutting as well as your finest high-speed machining operations.
The legendary Haas control makes every one of our VMCs easy to operate. With special Haas-only features like word-processor editing, one-button features, multi-function jog handle and Visual Quick Code programming, you'll find the Haas control is the most user-friendly CNC control available anywhere. Operating the machine becomes like driving your favorite sports car: It'll go wherever you point it. It's easy to point. And it won't say no.
|
|
Description
The S33APC vertical machining center utilizes a 40 taper, 13,000-rpm spindle with the stiffness and rigidity required for hard cutting applications and the speed necessary to provide high surface quality for demanding die and mold applications. Heavy cast construction and an axis configuration with no overhangs ensures high machine rigidity, resulting in outstanding accuracy over the full range of travel. It is capable of maintaining positioning accuracies to within ±.0001 inch (.003 mm) and repeatability of ±.00008 inch (.002 mm).
|
|
= DuraVertical 5060 =
Dura means new value in machine tools
With its "strength through simplicity" and "high flexibility and versatility,"the Dura Series offers the "confidence of stable operation" and "high-precision, high-quality machining," with excellent cost performance.
In order to meet all the requirements demanded of a machine tool, we thoroughly refined the basic functions to create a completely new machine.
This new concept machine, which takes basic performance and reliability to the highest level, will provide powerful support for our customers' machining.
Both the width and depth are smaller than conventional machines, dramatically increasing productivity per unit area.
With a basic design which completely eliminates waste and maximizes travel on all axes, we have secured a large work envelope.
This greater travel makes it suitable for a wide range of workpieces.
|
|
Product Lines:
Vertical Center Nexus Series:
High Performance vertical machining center designed to provide the maximum value.
VTC Series:
Fixed table, travelling column vertical machining center available with either #50 or #40 spindle taper. Fast tool changes and high speed positioning.
Moldmaker & Super Moldmaker:
Double column Machining Centers for high precision dies and molds.
FJV Series:
High accuracy and high rigidity vertical machining centre featuring double column construction.
Mazatech V Series:
Column feed vertical machining centers.
Versatech V Series:
Large double column vertical machining centers which can machine all 5 faces in the same workpiece setup by automatically mounting a right angel head to the main spindle.
|
|
|
Okuma's powerful ACE Center is the foundation for vertical machining centers that meet the most exacting production needs. Okuma's solid bridge casting, based on our proven Double Column Machining Center Design, results in improved accuracy. Higher spindle speeds, increased thermal stability and improved tolerance control make Okuma Vertical Machining Centers the right choice. Our custom designed linear guideway system and precision-built way system assure optimal performance during high-speed machining or heavy-duty cutting. Our industry leading THINC - OSP Control allows for greater versatility and minimal downtime.
|
|
R1, the new vertical machining center, equipped with a cross table, is the expression of the Serrmac evolution could reach applying the latest and most advanced technologies, in order to improve the performances of the machine and to satisfy the requirements of a production which has to be particularly effi cient for precision and reliability.
X axis 460 mm-Y axis 370 mm-Z axis 420 mm with a Working surface 600 x 350 mm; Max spindle power 5.5 kW, Max spindle speed 10.000 rpm and Rapid feed 30 m/min.
R1 model is aveileble in two version: Tool storage with nr. 12 tool positions and Wheel tool storage with nr. 16 tool positions, RANDOM type selection and with double-grip.
The control board is installed on the right side of the machine and there
are located all the elements of control: alphanumeric keyboard, CNC 10,4”
video color with graphic to visualize the different machining programs, alarms and machine messages, all the manual controls.
|
|
|
|
|
|
TK 446 - 3-axis CNC vertical machining center.
The flexibility of the TK 446 model makes it particularly suitable both for small manufacturing enterprises that often need to perform several tooling-ups due to frequent production changes and to larger multinational corporations that have to machine large batches.
Thanks to its excellent price/quality ratio, the TK 446 model represents a good starting point for those who wish to abandon their old machines with manual commands and to approach to industrial automation systems and to numeric-control machining centers.
The TK 446 model stands out for the high useful working lengths (also using aggregate heads) that set the TK 446 apart from other machining centers in the equivalent price range; this machining center is designed for drilling and conventional milling processes and also for copy-milling operations on aluminum extruded profiles and other materials, including steel profiles up to 5 mm thick, steel reinforced PVC, and various other plastics or wood.
Standard versions are available in 2 machining lengths: 3500 and 6500 mm.
Axis X: 3500 – 6500 mm
Axis Y: 370 mm / 250 mm (with aggregate heads)
Axis Z: 250 mm / 250 mm (with aggregate heads)
|
|
The advanced machine design of the DMC 35 V series delivers superb quality at an unbeatable price. The series comes standard with the most requested features like a 10,000 rpm motor spindle, 20x-tool magazine with double gripper, high rapid traverse speeds and high-tech controls with 3D-software. With spindle speeds up to 18,000 rpm, high dynamics and excellent sturdiness, the DMC 64 / 104 V linear suitable both for high volume chip removal and machining in the tool and mould sector. The tool magazine with 30 pockets and fast pick-up tool changer for setup parallel to production time lead to minimal idle times and delivers top productivity.
|
|
Bridgeport manufactures a full line of vertical machining centers to meet a broad spectrum of performance, capability and budget requirements. Our "best-in-class" design means you'll successfully make all of your parts right every time, year after year. You can count on Bridgeport machines to perform accurately over time, whether you're buying our performance series or our high performance vertical machining centers.
XR Series - High Performance (X,Y,Z)
P3 Series - Performance (X,Y,Z)
GX-Series - Performance (X,Y,Z)
XV Series - Standard (X,Y,Z)
|
|
Main Features :
High-Precision Spindle with Low Thermal Distortion
- Stable & high-performance spindle
- Direct-driven spindle
- Jacket cooling
Loading Capacity
- Axis travels(X/Y/Z) : 1,150/550/550mm(45.3¡±/21.7¡±/21.7¡±)
- Table load capacity : 800kgf(1,764lb)
High-Efficiency & High-Productivity
- Rapid traverse : 40/40/30m/min
High-Efficiency Machining Control
- HAI(Hwacheon Artificial Intelligence)
- HECC(Hwacheon Efficient Contour Control)
- Tool overload protector
|
|
|
|
|
|
Features:
Hardened and precision ground guide-ways are Turcite-B coated. Extra wide box ways design increase contact surface area for higher stability, faster positioning and heavier cutting.
The multi-speed spindle adopts top quality German-built Z.F. dual section gear box. Fully sealed immersion type lubrication with oil chiller circulates coolant and keeps the machine running cool even at 10,000 rpm. (Optional: KMV-8VC).
The spindle runs on high precision taper roller bearings which allow for any type of heavy duty cutting without vibration.
The Z axis is balanced with Nitrogen in conjunction with pneumatic Nitrogen cushioning of the headstock for automatic balancing during vertical motion. Perfectly level and smooth action eradicates vibration. (Optional: KMV-8VC)
Lubricant is pressure fed at a volumetric ratio for even distribution at all critical points for optimal lubrication.
All three axes employ C3 grade high precision ball screws, each with dual pretension nuts and internal cooling ducts with preloaded support at both ends.
The spindle and ball screws at all three axes are cooled by re-circulated oil which passes through an oil chiller, dispelling heat deformation (optional: KMV-8VC).
The disc type system is fast and compact. Arm movement is smooth with excellent repeatability. Tool change time is 2.5 seconds (BT40).
Compatible with a variety of CNC control systems including Fanuc, Mitsubishi, Siemens, Heidenhain or Italian Selca..
Sizes available from 820 × 600× 600mm to 1600 × 815 × 815mm ( X × Y × Z ).
|
|
Vertical Machining Center :
Column Traveling Type Compact Machining Center
- Fixed table and column traveling structure are suitable for a factory automation
- Coolant and chips were flushed into the rear of the machine for central chip collection.
- The width of the machine(1,460mm,57.5..) is ideally suited for a factory automation
|
|
MCV300
Travel
X-Axis 610 mm(24")
Y-Axis 305 mm(12")
Z-Axis 460 mm(18.1")
Spindle nose to table 70 - 530 mm(2.8-20.9")
Table
Table size 700 mm X 308 mm(27.6-12.1")
Floor to table 835 mm(32.9")
Max. table loading capacity 350 kgs()770Lbs
T-slot (no x Width x Pitch) 4 X 16 X 63.5 mm ( 4 X 0.6 X 2.5 inch )
Spindle center to column 415 mm(16.3")
Feed system
Rapid traverse speed X/Y: 20 M/min ( 787.4"/min) , Z:18 M/min (708.7"/min)
Feed motor(FANUC) X/Y: 1.2kW (8Nm) , Z: 1.8kW (12Nm)
Ball screw diameter & pitch 32 mm / 10mm (1.3" / 0.4")
Cutting feedrate 1-10,000 mm/min (0.04 - 393.7")
Type of transmission X/Y/Z%uFF1ADirect mounting
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 5.5 / 7.5 kW / 7.5 / 11 kW (Op)
Type of transmission Belt
|
|
MCV1300
Travel
X-Axis 1,300 mm (51.2")
Y-Axis 760 mm (29.9")
Z-Axis 680 mm (26.8")
Spindle nose to table 195 ~ 875 mm (7.7 ~ 34.45") 145 ~ 825 mm (5.7 ~ 32.48
Table
Table size 1,420 mm X 700 mm (55.9X27.6")
Floor to table 920 mm (36.2")
Max. table loading capacity 2,200 kgs (4840Lbs)
T-slot (number x width x pitch) 5 X 22mm X 125mm (5 X 0.86" X 4.9")
Spindle center to column 760 mm (29.9")
Feed system
Rapid traverse speed X / Y: 20 M / min ( 787.4" / min ), Z: 18 M / min ( 708.7" / min )
Feed motor (FANUC) X / Y / Z: 4.0 kW (22 Nm)
Ball screw diameter & pitch X / Y / Z: 50 mm / 10 mm ( 2 / 0.4" )
Cutting feed rate 1~10,000 mm/min(0.04 ~ 393.7"/min)
Type of transmission X/Y: Direct Drive , Z: Belt
Spindle
Type of tool shank BT 40 / CAT 40 / DIN 69871A
Max. spindle speed 8,000 / 10,000 rpm (Op)
Spindle motor 11/15 kW / 15/18.5kW (Op)
ype of transmission Belt
|
|
MCV 2000
Spindle
Type of tool shank ISO40 (BT / CAT / DIN 69871A)
Max. spindle speed 8,000 rpm / 10,000 rpm (Op)
Spindle motor 7.5/11 kW / 11/15kW (Op)
Type of transmission Belt
Table
Table size 1,050 X 600 mm ( 41.3 X 23.6 " )
Floor to table 855 mm(33.6")
Max. table loading capacity 1,000 kgs(2,200Lbs)
T-slot (number x width x pitch) 6 X 18 mm X 100 mm (6 X 0.7" X 3.9")
Spindle center to column 652 mm (25.6")
Travel
X-Axis 850 mm (33.5")
Y-Axis 600 mm (23.6")
Z-Axis 560 mm (22.0")
Spindle nose to table 100 ~ 660 mm (3.9 ~ 25.9")
Feed system
Rapid traverse speed X/Y: 20 M/min(787.4"/min) , Z:15 M/min(590.6/min)
Feed motor (FANUC) X: 1.8kW (12 Nm) , Y: 3.0kW (22 Nm) , Z:4.2kW (30 Nm)
Ball screw diameter & pitch X : 40mm, Y/Z :45mm / 10mm(0.39")
Cutting feed rate 1~10,000 mm/min(0.04 ~ 393.7"/min)
Type of transmission Direct Drive
|
|
Chip auger or optional conveyor for chip removal
Huge fully ground machine table with 5 T-Slots
Automatic lubrication
Spindle cartridge cooling system
35HP closed loop spindle motor with two-speed gearbox
AC Yaskawa Digital Servos
110mm O.D. 5 bearing spindle with air-purge seal
Inverted rail design in X axis means table support is always centered under the spindle
1000 IPM rapid traverse
Fully ground double anchored ballscrews
High speed Centurion PC based conversational control
Networking capable
|
|
Description of standard accessories:
Full Length Enclosure VMC-84, VMC-115
Splash Table Guard VMC-136, VMC-158, VMC-199, VMC-229, AF-8
Remote Manual Pulse Generator (M.P.G.)
Oil & Coolant Separator
Automatic Lubrication System
Taper Air Through Spindle
Collant Unit
Spindle Chiller
Work Lamp
Air Blast
Heat Exchanger
Tool Box with Leveling Bolts & Pads
One set of AGMA Operational Manual
One set of Control Operational Manual
|
|
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed.
Table size 930x460mm (36.5"x18")
Table T-slot (WxN) 18mm (0.71")x4
Max. table load (Center) 400kgs (880lbs)
X travel 860mm (34")
Y travel 510mm (20")
Z travel 610mm (24")
|
|
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed.
Table size 830x405mm (32.6"x16")
Table T-slot (WxN) (32.6"x16")
Max. table load (Center) 350kgs (770lbs)
X travel 660mm (26")
Y travel 510mm (20")
Z travel 610mm (24")
|
|
Rigid Meehanite casting, Heavy square (box) ways design on all axis, Four slide way design on base, Hardened & Ground square (box) ways on all axis, High precision C3 class ball-screw, Per-tension ball-screw design on all axis, All axis direct drive design, 8000rpm spindle speed.
Table size 770x330mm (30"x12")
Table T-slot (WxN) 16mm (0.63")x3
Max. table load (Center) 200kgs (440lbs)
X travel 450mm (18")
Y travel 350mm (14")
Z travel 460mm (18.1")
|
|
Features :
- Frame design using finite element analysis
- 24-station, swing-arm automatic tool changer
- 8000 rpm belt driven spindle design with coolant ring
- Heavy-duty ball-type linear guideways in all three axes
- Large-size pre-tensioned ball screws
- Servo-driven Z-axis travel for smooth contour machining without mechanical counterweights
- Robust control software and user-friendly, ergonomic control panel
- Dual-linked front doors for easy access
- Rigid tapping
- Artificial intelligence with contour control
|
|
|
The new Diana family of milling machines has been developed to suit those manufacturing sectors where enhanced 3-D surface finish in addition to rigidity and versatility is compulsory. Also the choice of several accessories available to this machine make it most suitable for multiple jobs.
|
|
|
|
|
|
The VMC 4020 FX is our most popular VMC. It provides a wide power range for job shop metal cutting flexibility. The VMC 4020 FX is designed with flame hardened integrated box way construction, Steinmeyer ETA+ dual mounted ball screws and spindle speeds ranges 8,000 to 10,000 RPM. This machine is ideal for job shops, mold/die and other mid-range parts producers.
40"x20"x20" Envelope
X/Y/Z axes travel on the VMC 4020 FX is 40" (1,016mm) X 20" (508mm) X 20" (508mm). Rapid Travel rate is 1,000 inch/min (25.4 m/min).
VMC 4020 FX comes with two available control options, Fadal GE Fanuc Oi - MC control or Fadal MP CNC control. With these choices MAG Fadal provides a complete package to meet our customers' ever changing machine requirements.
For detailed specification on VMC 4020 FX with Fadal GE Fanuc Oi- MC control please click here
For detailed specification on VMC 4020 FX with Fadal MP CNC control please click here
For detailed specification on VMC 4020 with GE Fanuc 18i-MB5 CNC control please click here
Advantages of FX Series
Cast iron integrated box way construction for increased vibration dampening
Box way system utilizing integral flame hardened ways for excellent stiffness
ETA Steinmeyer dual mounted ball screws for increased rigidity and reduced friction
Choice of controls; fully digital Fadal GE Fanuc 0i control with a whole host of high-end standard features or intuitive, user friendly proprietary control - Fadal MP CNC
High performance machining and low cycle times
Superior performance in cutting steel and other hard metals
|
|
|
|
Vertical milling machines, Vertical machining centers 
