|
|
The Turbopack is a shrink column mounted on a trolley, easily operated by pushing, for quick and uniform shrinking of pallet covers.
Quick : only 60 seconds for one pallet (euro).
Independant and mobile : shrinking operation is possible anywhere in the factory or the shop, thus preventing the movement of unsteady loads for wrapping.
|
|
Shrink Frame - Easy Flex
A prefabricated film hood is manually applied over the pallet load after which it is conveyed into the Easy Flex where the shrinking takes place automatically.
We recommend our Easy Flexfor production lines with relatively low staff costs but also for production lines with low capacities. In case of an increase in production capacity at a later stage, it is possible to integrate the LACHENMEIER Easy Flex in a High Speed Shrink Wrapping Line (Speed Flex) or in a Sleeve Wrapping Line (Sleeve Flex), thus upgrading the Easy Flex to a fully automatic packaging line.
|
|
THe automatic oven model FT53, equipped with hot air generator, heat shrinks palletized products packed in tubular heat shrinking film.
The hot air release linear gas burners are desigined to work both with methane and propane gas, ( validation number DG2217 BL 0557) released by the German Gas Institute, valid throughout the entire European Community.
The film is well fastened to the base of the product by an intake device which avoids the "hot-air balloon" effect caused by the dilation of the air contained in the bag when heated for the heat shrinking process.
All functions are managed by a PLC which controls all automatic and manual operations
|
|
Use shrinkfilm and the new RIPACK 2200 ensuring optimal strength and protection for your toughest or heaviest loads.
The new RIPACK 2200, is 30 % more powerful- 245 000 BTU and 30% faster, Shrinkwrap quicker.
Other features – cold nozzle protection, variable pressure regulator and safety valve. Improved ergonomics – 360° rotating nozzle.
|
|
Model 998 Features:
Lightweight body design - weighs only 2.2 lbs.
Adjustable power - 134,000 BTU/HR @ 15 PSI (39 KW) to 212,000 BTU/HR @ 30 PSI (62 KW)
Safety trigger - automatically shuts off gun when released
Cool Combustor even after extensive use
2', 4', & 6' Extensions for shrinking large items
The Benefits of Shrinkfast:
Manufactured in U.S. - parts always available for immediate shipment
Factory reconditioning service available
Full 1 year factory warranty
Authorized Distributors around the world
UL listed
The Benefits of Shrinkwrap:
Protection from weather damage
Cost effective: (only pennies per pallet)
Shrinkfilm is waterproof - stretchwrap is not
Portable & versatile for any size job
|
|
Model 975 Features:
Rugged aluminum body design - weighs only 3.3 lbs.
125,000 BTU
Safety trigger - automatically shuts off gun when released
Cool Combustor even after extensive use
2', 4', & 6' Extensions for shrinking large items
The Benefits of Shrinkfast:
Manufactured in U.S. - parts always available for immediate shipment
Factory reconditioning service available
Full 1 year factory warranty
Authorized Distributors around the world
UL listed
The Benefits of Shrinkwrap:
Protection from weather damage
Cost effective: (only pennies per pallet)
Shrinkfilm is waterproof - stretchwrap is not
Portable & versatile for any size job
|
|
- Shrink pistol for propane gas
- flexible hose of 8 meters
- safety valve
- gas cylinder cart (cylinder not included)
|
|
|
It is able to offer the heat shrinking of goods stacked on pallets thanks to warm air without the presence of flames at the lowest waste of energy. There is the possibility of fitting an appliance in that raises the pallet allowing the thermoretractile film to fix itself in the lowest part of the pallet. it can work with every type of gas or electricity and there is an automatic and semiautomatic model
|
|
Fully re-circulation air chamber with air flowing from 4 directions
Adjustable airflow quantity
Digital temperature control
Automatic tunnel cool down and stuff off-cycle, as temperature drops below 80 ° C
Rolling rods tunnel conveyor, heavy duty chain drive, rods silicon rubber coated
Conveyor speed adjustable by Inverter
Conveyor safety clutch - stops conveyor
|
|
To carry out the retraction of your products packed on a Welding machine in L, us you
let us propose 2 models of Tunnel of retraction:
Tunnel TR420
Tunnel TR640
Features:
Variation the speed of the conveyer by engine with D.C. current and electronic platinum of 0 with
18 meters per minute.
Control and temperature control by adjustable electronic thermostat of 0 with 250°C (+ or
- 2°C)
Harness ventilation with recycling of the air, speed 1380 turns/minute
Entry and exit of the conveyer prolonged over a 400 mm length
|
|
Features a single chamber including controlled air flow, automatic temperature control, variable speed conveyor, 12" high opening, volume control for bottom air and stainless steel OR Teflon mesh conveyor belt. (Please specify at time of order).
Options :
- Cascade Plates for Side Air with Adjustable Damper
- Casters with Brakes (set of 4)
- Concaver rods (for round product)
- Conveyor Belt, Driven Composite Link
- Conveyor, Live-Dead Roller, Teflon (standard spacing)
- Conveyor, Live-Dead Roller, Teflon (close spacing)
- Cooling Fan (for Polyethylene Kit)
- Increase Height 4" to 16" Opening
- Package Guides Over Belt (Teflon Coated)
- Polyethylene Kit (Teflon belt, side air cascade plates with adjustable damper & annealing chamber)
- Viewing Window (with lights) - End (reduces opening by 4")
- 460 Volt Power
- Stainless Steel Construction
|
|
WEL100 Shrinking tunnel
DESCRIPTION
Machine for in-line shrinking after a bagging machine - width 1300mm - maximum transit height 400mm
Electrical oven, 18 kW, 380 Vac 50/60Hz
ADVANTAGES
Higher stability of the bags
Better manipulation of the bags
Easy to operate
Average consumption of 6 kW (dependent on the outdoor temperature and the number of bags per hour)
OTHER VERSIONS
Shrinking tunnel - width 1600mm - height 400mm: WEL110
Shrinking tunnel - width 1600mm - height 600mm: WEL115
|
|
The Tunnel 50 and 70 machines are technically and aesthetically updated to fulfil various packing requirements flexibly and affectively with the most diversified types of heat-shrinkable films.
They can not only provide for exceptional heat insulation, but also combine exclusive technical features for an optimal utilisation under all packing circumstances. The eight adjustment of the belt with self-revolving rollers coated with silicone , the new digital display with 9 selectable and customisable programmes, the possibility of selecting the self-rotation of the belt rollers (with the possibility of mounting an additional Teflon belt for the most delicate products) , the adjustable air baffle plates and the power-off programme enable Tunnel 50 and 70 to shrink any type of film as efficaciously as possible. Series roller bench at the outlet
|
|
Hugo Beck supplies Shrink tunnels or shrink wrapping machine for manufacturing shrink packagings in all sizes and for all performance ranges, appropriate to the manufacturer's packaging machine programme.
Features:
- shrink wrapping machines for shrink packagings with various gap widths from 500 - 1.000 mm
- various clearance heights from 200 - 550 mm
|
|
We offer the following 16" shrink tunnels for use with our Standard and Custom sized Semi-Automatic L Bars.
ST Series Standard Features
- Console units with heavy gauge steel body and welded tubular steel frame and base.
- Chamber temperature is thermostatically controlled through an electronic time proportional temperature controller guaranteeing maximum temperature variation in the shrink chamber of no more than 2 degrees Fahrenheit.
- Variable speed conveyor system. Rollers are solid aluminum, silicone covered and set on 2” centers.
- Automatic shutdown cycle.
- A bottom shrink section that ensures perfect all around shrink.
|
|
Technical Specifications
- Adjustement of the air pressure.
- Silicone coated self rotating bars.
- Adjustement of the tunnel conveyor speed.
- Adjustement tunnel shrink temperature
|
|
Technical Specifications
- Adjustement of the air pressure.
- Silicone coated self rotating bars.
- Adjustement of the tunnel conveyor speed.
- Adjustement tunnel shrink temperature
|
|
|
The Mini 400 is the ideal shrink tunnel for small and medium-sized packaged goods. However, the tunnel needs only 0,67 m² of floor space and is particularly recommended for areas where space is a bit tight. Its compact exterior conceals a high-tech interior which produces surprisingly excellent shrinking results for this class of machine.
|
|
|
The welding machines in L manual, semi-automatic and automatics of series FP are characterized by an excellent relationship between quality and price and by their modularity. Indeed, all the models of this range can be provided with tunnel or without tunnel of thermorétraction. Compared to the welding machines in L with bell traditional, series FP offers a fuller productivity, as well as the possibility of using Polyethylene film, in addition to traditional heat-retractable films. Series FP of welding machines in L modular with tunnel includes/understands several models, to produce from 600 to 3000 packages/hour.
|
|
|
|
|
|
TR
Fix top cover shrink tunnels with high calorific power, low energy consume and high efficiency. Suitable for products packed in sleeve wrappers and Shrink machines. Different models with different dimensions and perfomances are available as well as special dimensions.
Hot air fix top cover tunnels, ULMA branch and TR model, designed for film to be shrink around the previously packe products. Products that have been previously packed in side sealers, sleeve wrappers, flow pack wrappers, overlap wrappers or in any other packaging machine.
High calorific power, low consume and low heat loss tunnels.
Characteristics:
- Solid frame manufacture in painted rolled steel tube.
- Easy integration in the existing lines.
- Legs can be adjusted in height and wheels to place and transporting.
- Machine's product flow from right to left.
- Different product transport systems available:
- Stainless steel mesh with or without side chains.
- Moving rollers covered by silicone.
- Electronic temperature control.
- Transport speed control.
- Inside the chamber, the aire is distributed uniformly which guarantees a great energy saving.
- Maximum isolation in order to reduce heat loss.
- Electric cabinet with ventilation.
- Protections and safety systems according to CE norms.
|
|
Shrink tunnels
The air direction (inside the shrinktunnel) is by means of double air flaps each individually controlled externally.
The standard roller transport system is supplied with heat resistant rollers coverd with silicone rubber. Wire mesh belt, heat resistant plastic slat belt or rotating rollers for polyolefin films can be supplied al options.
The speed of the main drive is infiniely variable.
In conjunction with a digital temperature controller th heating
may be infinitely adjusted up to 250°C.
|
|
| ... products without technical information |
| |
|
|
Shrink tunnels, Shrink guns...
