|
|
Pursuing the same aim to offer its Customers the best quality, today Antonelli launches on the market of the ferrous waste salvage a new range of product among which there is the Compactor on wheels suitable to all types of metal waste named Ecological Hydraulic Compactor GA 5000
Realized with the most advanced technologies, the Ecological Hydraulic Compactor GA 5000 represents Antonelli entry into the division of environmental services, bringing its more than fifty years experience in the field of metal-mechanical industry.
|
|
The Harris HBL66-16 comes in both the transportable DT Diesel and stationary Electric models. Designed to process factory clips, skeletons, auto bodies, auto body parts, white goods, and misc. light scrap.
The HBL66-16 baler/logger is the highest performiing machine in its class
|
|
MOBILE WASTE COMPACTORS WITH VOLUME OF :
10 cub. m.
12 cub. m.
15 cub. m.
20 cub. m.
25 cub. m.
Main purpose - collecting, compacting and transporting of paper and polyethylene waste with low cost, no pollution, low noise and simple operation.
Mainly used in - industrial zones, supermarkets, department stores, production halls, packaging manufacturers, distribution centers, residential areas and variety of waste applications
TECHNICAL DATA
Welded and heat treated steel structure
Hydraulic pressure unit for compacting
Monitoring of the container fullness
Electrocontrol
|
|
The new Mil-tek multi baler offers much more than the traditional multi chamber baler. At last you can now bale cardboard and plastic at the same time. The Mil-tek multi baler has two pressing chambers which works simultaneously making it the ultimate recycling solution if you want to save time, space, energy and money.
Features
• Save time and space by recycling all your cardboard and plastic in one easy to operate multi-baler
• Unlike twin chamber machines the multi baler has 2 chambers that can bale both materials at the same time
• Recycle up to 90% of your waste
• Reduce your waste costs by up to 80%
• Low energy consumption – One compressor can power both chambers
• Ideal for small to medium retail, manufacturing or wholesale businesses.
|
|
Multi-chamber balers
ORWAK 5070, 5070-HDC and 9020 are top-loaded multi-chamber balers for sorting and baling at source. Two chambers is the standard solution, but the system can be extended with more chambers when required.
ORWAK 5070 is a multi-chamber baler for compaction of paper sacks, cardboard and soft plastic etc. Capacity: up to 50 kg cardboard/80 kg plastic.
ORWAK 5070-HDC is also suitable for tougher materials like plastic containers and metal cans. Capacity: up to 80 kg cardboard/100 kg plastic.
Orwak 9020 is a large top-loaded extendable multi-chamber baler for sorting and baling diverse material. Capacity: up to 200 kg cardboard/300 kg plastic.
|
|
This baler is designed specifically for the baling of all kinds of textile products such as clothes, quilts, cotton rags, etc with large bale weight such as 400kg/bale. Single and double chamber models are available for options.
Features:
The compressing chamber door can be lifted automatically by two cylinders.
|
|
MK 1100
The multi-chamber baler MK 1100 offers optimal requirements for separation of recycables. By a small footprint are two or more chambers side by side arranged. One moveable press head compacts the materials.
The press plate guiding TopPlus® stabilised the press plate during the press process and increase the lifetime of the components.
CircleSystem® is a restraint system for the recycables. It reduce the re-expansion after the press process.
The hydraulic bale ejector BaleMatic® is powered by a separate hydraulic cylinder and guaranteed a bale throw-off.
|
|
Developed with an emphasis on economy, the Harris line of ABS shears has proven to be fast and economical, meeting the needs of scrap processors around the world. Offered in 550, 800, and 1000 ton models, the ABS employs a unique concept in design; a pre-compression charging box in which one half of the box opens to accept scrap, and the other half remains rigid with the “Tuck-and-Fold” flipper. All this plus the dependable, heavy-duty construction found in more expensive shears makes the ABS shear a wise choice for any yard.
Other exclusive features include external gib and knife adjustments, Harris cylinders, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It processes steel mill scrap, shapes, pipes and plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
Featuring the patented “Tuck-&-Fold” compression box, which densifies the material before shearing, the Harris BSH shears are available in capacities of up to 2,200 tons. The “Tuck-&-Fold” compression box reduces pre-processing time with no or minimal torch cutting operations, allowing fast feeding and great production. BSH shears are available with throat widths of 3’ to 5’ (.9m to 1.5m).
Other exclusive features include external gib and knife adjustments, Harris cylinders, a wide-open charge hopper for fast loading of irregular scrap, an easy-to-service power pack, and Teflon-protected pistons for minimum friction and more hours of trouble-free operation. It prosesses auto scrap, steel mill scrap, selected freight car and ship sections, shapes, pipe, plate, no. 2 heavy melting scrap, and selected no. 1 heavy melting scrap.
|
|
The TG line of ferrous balers is the industry standard for heavy-duty, high production, reliable baling systems. TG Balers compresses material into the charging box with a massive lid and utilizes a three-compression baling system to produce a bale.
Processes
* Slitter coils
* Wire
* Industrial clips & skeletons
* Steel mill sheet
* Automobiles
* Railroad boxcar sides & roofs
* Selected structural steel
* Reinforcing rods
|
|
|
|
|
|
Applications
Neue Herbold GS series guillotines are used for the pre-size reduction of monofilament bales such as from fibre, bands or tapes, tacky film packages, extremely large lumps, start-up purgings or rubber bales.
Design
Neue Herbold GS series guillotines rigid all welded construction. The guillotine knife is mounted in a double sided channel and operates with two oversized hydraulic cylinders which meet the horizontal stator bar. The stator bar is fully adjustable to insure a precise and exact cut of the baled material. The cutting pressure of the guillotine knife can be adjusted to further insure a clean material cut. The material bale length cut can be controlled through a optional hydraulically operated gate.
Advantages
- precise adjustment of the vertical knife
- double sided frame construction
- vertical knife complete enclosed for safety
- fully adjustable stroke, knife speed and cutting pressure
- double sided knife channel
- two cylinder operation to insure true knife operation
|
|
- We design and provide special solutions for the scrap processing plant.
- The special design secures particularly efficiency in operation.
Main features:
- Rippled edges prevent little peaces getting squeezed between moving surfaces of the compression chamber.
- Prismatic guiding and stopper secure precise parallel movement of guiding parts.
- Upper part of the compression head is covered by scrapers, so that loading of scrap is even possible when the press is in operation.
- Compression head is equipped with V-type knifes, which cut easily overflowing pieces.
|
|
Air-Operated Can Press for pressing cans of up to 30 litres:
• No Oil
• No electrical parts
• Safe & easy to use
• Easy to clean
• Takes up very little space
|
|
EK 800 - compactly and strongly
With pressing forces of 60 kN (6 t) and 100 kN (10 t) is the EK 800 a compact power pack. Bale weights with up to 80 kg are possible.
Equipped as standard with the press plate guiding TopPlus® and the optional available hydraulic ejector BaleMatic® are several bales none problem.
|
|
Air-Operated baler =
• Low Energy Consumption!
• Fast Pressing Cycle!
• High Degree of Compaction!
• Easy Maintenance!
• Safe Operation!
Very versatile bale press for large amounts of e.g. Cardboard, Plastic, Paper and Big Bags
|
|
Specifically designed for Distribution Centers, Warehouses, Industrial Plants, & Assembly Plants.
* Bales Corrugated, Plastic, Newspaper, and other non-ferrous materials
* Reduces waste and associated disposal costs
* “Time under Pressure” produces a denser bale
* Meets or exceeds ANSI Z245.5
* Baler designed with operator safety in mind
* Smooth vane-type hydraulic pump
* TEFC high efficiency motor
* UL® and CUL® listed panels
* Easy to operate
* 8’-10’ power cord supplied
* Operation and service procedures video included
* Illustrated operator maintenance manual included
* Expert installation available
* Soft-shift shockless hydraulic circuit
* Adjustable bale sizing on all models (3”-6” height range)
* Harris Authorized Distributors provide local parts, sales, and service
|
|
|
This baler coordinates with horizontal track which connect with paper making machine. It is popular in the paper producing factories.
|
|
EK 1109
The EK 1109 is all purpose and offers compared to the EK 1107 a higher input because of the bigger press chamber. Easy handling and a high safety standard are self-evident.
Different advantages are included:
QuickDoor® is a swing-/sliding door for quick and secure filling of the presschamber at smal space.
The press plate guiding TopPlus® stabilised the press plate during the press process and increase the lifetime of the components.
CircleSystem® is a restraint system for the recycables. It reduce the re-expansion after the press process.
The hydraulic bale ejector BaleMatic® is powered by a separate hydraulic cylinder and guaranteed a bale throw-off.
|
|
Static waste compactor
• Reduced volume
• Greater transportable weight
• Fewer vehicles on the roadways
• Less diesel burned
• Less pollution
TS80 MODEL
The 80 ton thrust of this compactor is obtained through the use of two parallel cylinders placed on saddles in order to limit bending.
This type of compactor is typically used for large quantities of industrial rubbish. It has a large. hourly translation capacity. The compaction chamber is available in two sizes. The TS80 offers 2000mm width x 2000 mm length. The TS80L, instead, offers 2000 mm width x 2700 mm length.
This type of compactor is typically used at transfer stations.
|
|
Static waste compactor
• Reduced volume
• Greater transportable weight
• Fewer vehicles on the roadways
• Less diesel burned
• Less pollution
TS40C MODEL
This particularly small compactor has a 40 ton compaction force. It comes with an independent electro-hydraulic control unit which is separate from the compactors and placed on either the left or right side of the compactor. In shopping centres it is also possible to place it on top of the loading lid.
|
|
Top-loaded bin compactors
ORWAK offers a range of bin compactors suitable for compaction into standard two- to four-wheeled plastic/steel bins in the capacity 240-1100 litres.
ORWAK 4100 is constructed for four-wheeled bins and ORWAK 5070 is a flexible combination of a multiple-chamber baler and a bin compactor.
ORWAK’s LE TL and LE FL are based on an ingenious modular system and made from maintenance-free aluminium. Waste can be compacted into standard two-wheeled bins or into plastic bags.
|
|
| ... products without technical information |
| |
|
|
Waste treatment: baling presses, compactors
