|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
High pressure pump for viscous fluids or other applications.
|
|
Economical and robust, the Milroyal G pumps dose all traditional liquids used in water treatment and industrial processes including: acids, bases, chlorinated products, coagulants, and other products. Designed for ease of maintenance and start-up, the Milroyal G features a robust HPD-style hydraulically actuated diaphragm liquid end coupled to a variable eccentric drive. The absence of contour plates in this liquid end results in "straight-thru" flow ideal for handling polymers and slurries. A unique integral 3-function valve allows for purging of any entrapped gases in the hydraulic oil without disturbing the relief valve setting. Also integral to the liquid end is a site glass for visual indication of a relief condition in the hydraulic system. The smooth sinusoidal flow produced by the variable eccentric drive minimizes flow pulsations and mechanical shock to system components.
Product Features:
HPD liquid end design eliminates contour plates.
Double diaphragm w/leak detection available (10/98).
Liquid End Materials: PVC, PVDF, 316SS.
High viscosity and slurry liquid end options.
56C face and IEC motor options
Integral 3-function valve in hydraulic oil system: automatic airbleed, safety/relief valve, purge button.
Non-lost motion drive design minimizes flow pulsations and mechanical shock.
AC & DC variable speed drives available for automatic control from a 4 - 20 ma signal.
Recommended Service Intervals: 8000 hours when operating at full rated pressure
|
|
Hydraulic injector pump for the injection of liquid or soluble fertilizer into irrigation network.
It is self contained, with no externals parts other than the connection hoses, and with no water pressure lost in the irrigation pipes
A controller ca be connected that acts upon an electrical valve to start and stop the pump in the desired moment
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Products features:
- Designed for Quick Disassembly for easy cleaning and sterilizing.
- Conforms to 3A Dairy Standards
- Ceramic, Stainless Steel & Teflon Fluid Path
- Resistant to Chemical & Biological Attack
- No Internal Threads or Blind Holes
- Easily Dismantled for Cleaning & Sterilizing
- Can be used with any Q Drive |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
Easy Tube Loading IP66 Programmable AU.UPC.EZ.IP66 Autoclude Peristaltic Pump.
Single or repeat dose
Calibration facility
Brushless motor for 24 hr duty
Variable speed / flow rate
Manual, analogue or digital control
Easy tube change
Intelligent pump fitted with the Autoclude Easy Tube Load Pump Head change the tube size and the pump re-calculates flow rate and dose parameters. Dispenses doses singularly or as batch with speed ramp non drip feature.
Features:
User friendly keypad control
Two line alpha numeric display
Manual, analogue and digital control
Vary flow rate, speed & tube size
Tube size selector
Single or repeat dosing
Non-drip run back feature with speed ramp
Calibrate for viscous liquids
Low maintenance brushless motor
Easy tube load stackable pump head with three roller rotor
Washdown IP66 Enclosure
Technical:
Flow rates 0.8 to 1312 ml/min
Speeds from 10 to 250 rpm
Six tube sizes
Five tube materials
Remote speed control
0-10v dc, 4-20mA or 10K Pot
Remote Stop/Start/Reverse
Volt free contacts or 3-36v dc
RS232 computer signal interface
115/230v 50/60 Hz supply |
|
DOSE IT – For easy dispensing of culture media and buffers
The programmable peristaltic pump DOSE IT is extremely simple to program and operate because of the intuitive user interface coupled with the large display. The setting of all functions and parameters is self-explanatory so that, with minimal learning time, everybody can start working immediately. A broad range of dose volumes can be dispensed with high accuracy since the DOSE IT is compatible with differently sized tubing: from 1 mm tubing for dispensing small doses to 8 mm tubing for high-throughput pumping. The compact and lightweight design allows the DOSE IT to be moved and placed virtually everywhere in the lab, further increasing its flexibility.
Special features:
• Easy to use - large display
• Handy – 20 dosing protocols can be saved
• Flexible - different tubing for dosing microlitres to litres
• Mobile - fits and goes everywhere
|
|
Verderlab peristaltic tube pumps
Series VL, Handy and VF
The Verderlab series of pumps comprises of the Verderlab peristaltic tube pumps, an extensive range of laboratory and pilot plant peristaltic tube pumps, providing numerous applications for laboratory and dosing applications.
|
|
Verderlab pump heads distinguish themselves because of the highly perfected detail of construction and geometric design, achieved through an exacting engineering and design review process.
A tube bed is sized specifically for every tube dimension. This ensures that the pump head remains fixed in place inside the pump head without needing any additional clamps.
Precise manufacturing tolerances provide constantly maintained clearances between the ball bearing rotor and the tube bed, preventing back flow. Therefore higher volumetric efficiency can be achieved, which sets the standard for delivery capacity.
|
|
Autoclude has an extended program tube pumps, including housings. Dependant on the model the pumps are either very suitable for sampling. laboratory applications, continuous processes, batch dosing etc.
1. Cased Series, Easy tube load / IP66
The tube pumps with an easy tube load are available with 5 different tubing mateirals in six Ø sizes. There are 4 models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 1,8 l/min.
2. Cased-series, Heavy duty 3000i / IP66
The tube pumps heavy duty have a robuuste pump head for cnotinuous operation. Special tubing for high viscous liquids. 5 tubing materials in 3 Ø sizes. There are for models; manual control, auto control, programmable and IP66 programmable dispenser. Flows up to 3,25 l/min.
3. Cased-series, 8000 Heavy duty
Tube pump, including housings for variable control (speed/flow). Flows up to 8 l/min.
4. Cased-series, Variable speed
Compact tube pumps with quick suction abilities. The design is robust to enable continuous operation. Flows up to 8 l/min. |
|
Specifically designed to overcome the challenges of reliable and accurate pumping at high-volume capacities. Every revolution of the 420 pumps more than 1½ gallons; the 520, more than 2 gallons. Ideally suited for tomato, vegetable and pet food industries and for chemical/industrial applications.
- Rotor/shaft connection sealed from the product zone
- 316L stainless steel pump body
- Exclusive, non-galling Waukesha "88" alloy rotors;
316L stainless steel rotors optional
- Bi-directional flow
- Mechanical seals standard; O-ring seals or variety of
standard commercial seals optional
- Seal replacement from the front without removing
pump body
- Maximum pressure: 150-200 psi (10.3-13.8 bar)
- Temperature range: -40° F. (-40° C.) to 300° F. (149° C.) |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
The new HL-Series pumps give you the same accurate, predictable flow and pressure control as our standard D-Series, while conforming to safety standards for use in UL Class I, Division 2, Groups A B C & D, T3B or Zone 2, II 3G EEx nC IIC T3 environments. Suitable for installation in locations providing adequate protection against the entry of solid foreign objects or water capable of impairing safety. The Hazardous location rating is achieved through internal design modifications including the use of brushless DC motors. This approach eliminates the need for purge boxes or other additional safety devices.
The HL controller has a keypad and LCD, as well as built-in and optional interfaces for computer control and other devices. Programming is easy and flexible, with instant access to menu screens even when the pump is running. This allows you to change operating parameters on the fly. An optional extension cable for remote operation lets you locate the pump up to 50 feet from the controller. |
|
MacRoy D
Multi-function discharge valve for pressure relief, back pressure, purge, & bleed
Front-end scavenging drive design for full evacuation of process fluid regardless of pump capacity setting
Unique motor controller available for automatic control from either a pulse or 4-20 ma signal
MacRoy G
Double diaphragm available
High viscosity and slurry liquid end options
56C face and IEC motor options
Variable eccentric drive design minimizes flow pulsations and mechanical shock
%u2022 AC & DC variable speed drives available for automatic control from a 4-20 ma signal
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Diaphragm
Triple Diaphragm Design
Double Ball Check Valves
Pressures up to 15,000 psig (1,035 bar g)
Flows up to 175 gph (663 lph)
Meets API Standard 675 |
|
Features:
- Ideal for vehicle, boat, or remote applications.
- Widely used to inject discrete quantities of additive fluids in main discharge lines of tank trucks and pest control vehicles.
- Mechanical flow adjustment plus electronic control by voltage variation.
- QB & RHB Pumps have an extension shaft at the rear of the motor accepts a user supplied tachometer for closed loop circuit process applications or other rotational controls. |
|
Designed for fluid dispensing & metering applications in industrial process environments
Features:
- FMI's Patented CeramPump® Valveless Piston Design - One Moving Part
- Fixed or Variable Speed
- Dispense or Continuous Metering
- Precision Long Life Stepper Motor and Control Circuit
- PLC Control Capabilities
- Dispense Volume: 0.002 to 1.28 cc/shot, 0.5% Precision, up to 7 shots per dispense
- Rugged Stainless Steel , Splash-Proof Wall Mount Design
- Ideal for Battery Manufacturing, Precision Lubrication, Electronic Assembly, Food Additive Injection, and UV & Solvent Adhesives
- Model IDS 2000 shown with tri-clamp pump head option |
|
| The ElectroFertic®2000 metering pump is an electric piston dosing pump made up of a driving module and one or two injection modules of 500, 750, 1000 l/h (132, 198,234 GPH) with electronic regulation by means of an inverter |
|
LMI Pump : ELECTROMAGNETIC dosing pumps, the LMI range is electronically operated. Flow rates up to 76 l/h and pressures up to 135 bar.
G™ Pump : Motor-driven dosing pumps with mechanically actuated diaphragms. Flow rates up to 1200 l/h and pressures up to 12 bar.
mROY® Pump : HYDRAULICALLY actuated diaphragm dosing pumps. Flow rates up to 310 l/h and pressures up to 123 bar.
MAXROY® Pump : ELECTRIC MOTOR-driven hydraulically actuated diaphragm dosing pumps. Flow rates up to 1100 l/h and pressures up to 28 bar.
MILROYAL® / PRIMEROYAL® Pumps : These HIGH FLOW and HIGH PRESSURE dosing pumps present a huge capacity of adaptation to meet the specific requirements of your industrial processes. Flow rates up to 50,000 l/h and pressure up to 500 bar.
Automatisms - Regulation : A range of systems for flow rate automation.
Accessories : A wide range of accessories to round off any dosing pump facility |
|
GENERAL SPECIFICATIONS
Designed for continuous operation in industrial applications
Hydraulic "by-pass" mechanism actuates PTFE diaphragm
Very compact package with small footprint
Capacity adjustment from 0 to 100% of rated flow with ±1% steady state accuracy over a 10:1 turndown ration
High performance single and double check valves
Integral over-pressure safety valve
AVAILABILITY Simplex and Duplex available (on most models)
Liquid end materials available: cast iron, 316 stainless steel, alloy 20, alloy C22, PVC, & PVDF (on most models)
Multiple stroking speeds available to cover intermediate flow ranges
Motor mountings available: various integrated motors; API & close coupled NEMA 56C, 48 can frame; API & close coupled IEC 71 B5; and, API 143/145 TC (on most models)
Manual, pneumatic, or electronic capacity control available (on most models)
Double diaphragm rupture detection available (on most models)
ANSI flanges available for suction & discharge connections
|
|
Motor Driven Pumps Spring Series
Plunger Piston Metering Pumps PS1 Series
PS1 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 1,5 to 304 L/h
Max pressure: 20 BAR
Stroke rate: 58 • 78 • 116 strokes/minute
Motor: standard 0,18 and 0,25 Kw (IP 55)
Stroke length: 15 mm
Plunger Piston Metering Pumps PS2 Series
PS2 pumps are plunger piston metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 40 to 1000 L/h
Max pressure: 20 BAR
Motor: standard 0,25 • 0,37 • 0,55 • 0,75 Kw (IP 55)
Stroke length: 25 mm
Mechanical Diaphragm Metering Pumps MS1 Series
MS1 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in an aluminium housing.
Capacity: from 5,5 to 460 L/h
Max pressure: 10 BAR
Motor: standard 0,18 • 0,25 • 0,37 Kw (IP 55)
Stroke length: 2 mm • 4 mm • 6 mm
Mechanical Diaphragm Metering Pumps
MS0 Series
MS0 pumps are mechanical diaphragm metering pumps featuring a spring return mechanism in a plastic housing.
Capacity: from 17 to 47 l/h
Max pressure: 5 bar
Diaphragm diameter: 50 mm
Motor: standard 0,08 kw (IP55)
Stroke length: 2 mm |
|
WATSON-MARLOW BREDEL is the largest manufacturer of peristaltic, tube and hose pumps in the world, with over one million pumps sold.
For dosing and samples from microlitres to litres, in laboratories and industry, there is a Watson-Marlow dispensing, sampling or filling pump which will be right for your application
They are the perfect pump, with no valves, seals or glands, and the fluid contacting only the bore of a hose or tube. Because they are simple to install, easy to operate and quick to maintain, they are the world's fastest-growing pump type.
|
|
High capacity gear metering unit for the processing of filled and unfilled elastomeres in injection and spreading applications. Variably adjustable mixing ratio with an output capacity of 1 to 8 kg/min., depending on the material.
Separately driven metering pumps with permanent control and readjustment of the mixing ratio via the 2KM processor control. |
|
DP-3000 Linear Positive Displacement Pump
The DP-3000 Linear Pump is a servo-controlled, volume displacement pump. It is a true positive displacement linear pump that is not affected by fluid viscosity, supply pressure, needle size or fluid/pump temperature. Flow rates not previously available from auger pumps are now a reality with Asymtek's linear pump technology.
Features
- The pump is ideal for dispensing a wide range of patterns, dots, lines, spiral fills for filled and unfilled fluids
- Pump's servo drive mechanism and Fluidmove® for Windows® software allow multiple shot sizes in the same program
- Quick-release mechanism and few wetted parts provide tool-free disassembly and assembly for quick and easy cleaning
- Better than 1%, 3 sigma accuracy for consistent dispensing with multiple programmable shot sizes
- Rapid refill speed for optimal underfill dispensing
- Fast, efficient priming with minimal material waste
- High flow rate for high throughput
- True positive displacement dispensing, independent of viscosity
- Outperforms rotary positive displacement pumps with regard to accuracy, speed and wear
Recommended Applications
- Underfill
- Chip Scale Packaging
- Encapsulation
- Adhesives
- Thermal Compounds for heat sink
- Die Attach
- Lid Seal |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
- ORP controller and dosing pumps in one compact unit.
- ±5 mV accuracy with unbeatable performance.
- Isolated 4 to 20 mA recorder output.
- Proportional dosing slows the pump down when the measured ORP level approaches the set value which avoids over dosage of oxidizing or reducing agents.
- Alarm contact is activated whenever the ORP reading varies more than 200 mV from the set point.
- Auxiliary contacts allow the user to attach a mixer or priming pump that is activated only when the pump is dosing.
- High Quality materials are used for all parts that come into contact with liquid.
|
|
|
|
Dispensing pumps
