|
|
The new K-Tron Bulk Solids Pump (BSP) feeders have been specifically designed and engineered to provide gentle, precise feeding of free-flowing pellets, granules, flakes, powders and friable products.
The BSP feeders do not use the usual screws/augers, belts or vibratory trays to convey the material. The feeder utilizes positive displacement action to feed free flowing materials with astounding accuracy, offering uniform discharge, consistent volume and gentle handling.
The BSP feeders have vertical rotating discs that create a product lock-up zone, conveying the material smoothly from storage hopper to discharge outlet, achieving true linear mass flow.
Utilizing a simple design and the principle known as "lock up" (see demonstration), the material in the feeder is moved together in true positive displacement, producing excellent linearity and breakthrough accuracy levels.
With no pockets or screws and only one moving part, the compact feeder is cleaned in seconds, making it ideal for applications with frequent material changes.
|
|
Characteristics
Horizontal or Vertical.
Single Stage.
Enclosed Impeller.
Applications
Water.
Waste Water.
River Water.
Rain Water. |
|
The MEMDOS DX motor-driven diaphragm dosing pump does not only stand out for its performance but also for its reliability, versatility and user-frienliness: The control is easy to understand and to operate.
MEMDOS DX pumps care totally leakage-free and thus also suitable for toxic and aggressive media.
On request, the MEMDOS DX pumps can also be supplied with a double-diaphragm system. Then uncontrolled leak-age of media is avoided even if the dosing diaphragm wears out.
Wherever high flow rates in controlled processes are required e.g. in sewage treatment plants. Thanks to the sturdy tappet drive with manual or automatic capacity adjustment, acids, lyes, precipitating agents and flocculents are dosed reliably and precisely. |
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
High Pressure
Blue-White's FLEX-PROTM A3 Peristaltic Metering Pump has Outstanding Benefits, including: Outputs to 126 LPH. Output Pressures to 8.6 Bar; Automated PPM Dosing; Self priming, No Bypass valves required; FLEX-PRO won't vapor lock or lose prime; One button Prime Mode for easy priming and servicing; Brushless Variable Speed Motor; digital touch pad with menu driven software; VGA Graphic backlit LCD displays motor speed, input signal values, service and alarm status; Inputs include: 4-20mA, 0-10Vdc, and Pulse Signal for external speed control, and 30 VDC contact closure for remote start/stop; Patented Tube Failure Detection System (U.S. Patent No.7, 001,153); NEMA 4X IP66. |
|
| Larox LPP-M Pump is ideal for accurate metering; an exact flow per revolution irrespective of the pipeline pressure as well as accurate metering throughout the whole flow range. Ideal for pumping diverse slurries and metering a wide range of media, in variety of industry fields ranging from chemical, construction and mineral processes to food and beverage industries. Dry run capability and self priming, exact flow per cycle. Seal less pumps will not get damaged even if they run dry for longer periods of time. Compact design and robust construction is straight designed to industrial use. LPP-M pumps have also the highest maximum working pressure on the markets and are equipped with a patented Tube Failure Detection (TFD). |
|
Peristalitc Pumps
SAFE AND RELIABLE
■ Polypropylene enclosure extremely shockproof and resistant to chemical aggression.
■ IP 65 protection degree and class 2 electrical insulation (no ground connection required)
USER FRIENDLY
■ Via trimmer settings simple and fast parameters configuration
■ Plugs for protecting settings to avoid undesired tampering
EASY INSTALLATION AND MINIMUM MAINTENANCE
■ Easy wall mounting and removing
■ Plugs on circuit board provide for a quick electrical connection
■ Easy tubing replacements. |
|
New 720
Peristaltic - chemical metering pumps -720 IP66 NEMA 4X cased pumps for high-flow processes, suitable for industrial and sanitary, flow rates of 2000 litre/hr with single pumphead, 3600:1 speed turndown, maintenance-free |
|
For the dosing of liquid chemicals, Alltech Dosieranlagen GmbH has developed the piston diaphragm metering pumps of the FKM series.
These metering pumps meet the highest requirements in operational reliability and accuracy.
Alltech piston diaphragm metering pumps are built in a modular concept. This guarantees high flexibility in combining the pump elements for various areas of applications.
By using different materials and designs for the liquid end, Alltech metering pumps may be used for the dosing of almost all kinds of chemicals.
To find an optimal solution for your dosing tasks, we offer various dosing capacities and pressure ranges.
The integrated pressure relief valve guarantees maximum security.
A wide range of accessories (stroke actuators, pulsation dampers e.g.) completes the range of our production.
|
|
The MultiFertic® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH
In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained.
|
|
| For corrosive and abrasive media, which have to be dosed against higher pressures than 16 bar piston pumps can be fitted with a piston-diaphragm system. The KMS system combines the advantages of leakage-free diaphragm dosing pumps and precise piston dosing pumps and thus ensures reliable dosing. |
|
Piston pumps are precise and – compared to diaphragm dosing pumps – almost pressure-independent metering units. The flow rate changes in proportion to the stroke length and can thus be adjusted to very small values. Fields of application are – among others – process engineering and chemical processes, i.e.: wherever the medium must be metered precisely.
The FEDOS E / DX piston dosing pumps from Lutz-Jesco are available at flow rates between 0.17 and 31.5 l/h, with or without microprocessor control. Depending on the size of the pump, maximum pressures between 30 and 200 bar are admissible.
If no control is required for constant metering, the motor is connected directly to the terminal box. In this case, FEDOS E pumps are used. To change the flow rate, either the stroke length can be adjusted mechanically, or the speed of the motor is controlled by means of a separate frequency converter.
FEDOS DX pumps are used if an integration in controls or automatic control systems is requested.
FEDOS DX pumps allow the adaption to a large number of different control systems and system monitoring equipment. The signals required for the external avtivation of the pump can be simple voltage-free closing contacts from water meters or controllers or analog 0(4)...20 mA signals.
|
|
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Double Ball Check Valves
Pressures up to 10,000 psig (690 bar g)
Flows up to 1,225 gph (4,637 lph)
Meets API Standard 675
|
|
DP-3000 Linear Positive Displacement Pump
The DP-3000 Linear Pump is a servo-controlled, volume displacement pump. It is a true positive displacement linear pump that is not affected by fluid viscosity, supply pressure, needle size or fluid/pump temperature. Flow rates not previously available from auger pumps are now a reality with Asymtek's linear pump technology.
Features
- The pump is ideal for dispensing a wide range of patterns, dots, lines, spiral fills for filled and unfilled fluids
- Pump's servo drive mechanism and Fluidmove® for Windows® software allow multiple shot sizes in the same program
- Quick-release mechanism and few wetted parts provide tool-free disassembly and assembly for quick and easy cleaning
- Better than 1%, 3 sigma accuracy for consistent dispensing with multiple programmable shot sizes
- Rapid refill speed for optimal underfill dispensing
- Fast, efficient priming with minimal material waste
- High flow rate for high throughput
- True positive displacement dispensing, independent of viscosity
- Outperforms rotary positive displacement pumps with regard to accuracy, speed and wear
Recommended Applications
- Underfill
- Chip Scale Packaging
- Encapsulation
- Adhesives
- Thermal Compounds for heat sink
- Die Attach
- Lid Seal
Dispensing Systems
X-1020 Axiom%u2122 Semiconductor Dispenser
M-2020 Millenium® Ultra High-Speed Semiconductor Dispenser |
|
| DPP offers an assortment of quality reciprocating piston pumps used in a wide range of applications, from critical medical devices to chemical dosing/metering equipment and laboratory analysis equipment; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low controlled and repeatable flow application requirements. |
|
| Kd Scientific is the leading supplier of syringe pumps. Recognized for quality, accuracy and reliability they are the syringe pump of choice by researchers, scientists, and engineers worldwide. A broad line of syringe pumps is offered from simple one syringe, infuse only, to a programmable 10 syringe infuse/withdrawal pump to meet your applications, |
|
Isco D-series Pump Models :
Teledyne Isco Series D single-pump systems consist of a controller and pump module. The piston-driven pump module uses a single speed gear train. Nitronic 50 is the standard material for cylinders, pistons, and caps, with Hastelloy and other alloys available for even greater chemical resistance. Standard seals are graphite-impregnated Teflon, providing long life under harsh operating conditions, with optional seals availale for special applications.
The Series D controller offers many different operating modes and features, and we can also customize the software to your specific application on request. The standard operating modes are:
- Constant flow
- Constant pressure
- Flow or pressure programming
- External control |
|
Model Number MCP-50
Dimensions（mm）φ26xH63.5
Maximum Pumping Volume 50μl/cycle
Adjustable Pumping Volume Range 5～50μl
Maximum Operating Frequency 4Hz
Repeated Pumped Volume Accuracy ±1%(15～50μl),±2%(5～15μl)
Port Connection M6 , 1/4-28UNF
Ambient Temp. Range 10 - 40
Fluid Temp. Range 10 - 40
Voltage 12VDC , 24VDC
Power Consumption 4.4W
Duty Cycle Continuous
Insulation Class B
Dielectric Strength AC1500V 60s
Wetted Materials PTFE (POM or PP) , FPM |
|
KD Scientific Pumps are acknowledged as the industries highest valued solution for deliver precise and smooth flow in research, pilot plants and production applications.
A broad line of syringe pumps from the most basc to advance programmable pumps. They are easy to use, selectable user flow rates and volumes.
They use a glass/plastic/stainless steel syringes. Models available for 1 ul to 140 ml syringes.
|
|
Features:
- Designed for Quick Disassembly for easy cleaning and sterilizing.
- Conforms to 3A Dairy Standards
- Ceramic, Stainless Steel & Teflon Fluid Path
- Resistant to Chemical & Biological Attack
- No Internal Threads or Blind Holes
- Easily Dismantled for Cleaning & Sterilizing
- Can be used with any Q Drive |
|
Waukesha Cherry-Burrell's traditional "Can-Do Pump." Versatile in application, its reliability has made it the industry standard worldwide for more than 50 years.
- Easy cleaning and disassembly
- Flexible, three-way mounting
- Field interchangeable single and double "O" ring and mechanical seals
- Exclusive, non-galling Waukesha "88" alloy rotors
- 3-A and BISCC approved
- Maximum pressure: 200 psi (13.8 bar)
- Temperature range: -40° F. (-40° C.) to 300° F. (149° C.) |
|
DV-7000 Heli-flow® Servo-Controlled Auger Pump
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the needle, regardless of warpage. The DV-7000 pump is also available in a luer-lock-needle design for use with a height sensor.
For micro dispensing, the DV-7000 Heli-flow® pump with a special cartridge assembly delivers very small and accurate dots. When configured with the Axiom%u2122 X-1010 dispenser, the system delivers dot volumes as small as 3 nanoliters in volume and 0.006 in. (6 mil) in diameter and creates lines as small as 0.007 in. (7 mil). This dispensing system is ideal for the manufacture of micro-electromechanical systems (MEMs), optics, micro-opto-electromechanical systems (MOEMs), hybrid components, disk drive heads, micro potting and other electronic component assemblies.
Features
- Closed-loop motor control with encoder feedback ensures high repeatability
- Luer-cartridge option allows use of a wide range of standard needles
- Tool-free disassembly of wetted parts for quick and easy cleaning
- Fast cartridge changeover
- Cartridge for micro-dispensing
Recommended Applications
- Solder Paste
- Die Attach
- Conductive Adhesive
Dispensing Systems
- X-1010 Axiom%u2122 SMT Dispenser
- M-2010 Millennium® Ultra High Speed SMT Dispenser
- C-718 Century® Precision SMT Dispenser
- S-820 Spectrum%u2122 Precision Batch Semiconductor Dispenser
- D-580 DispenseMate® Benchtop Dispensing System |
|
|
|
Dispensing pumps
