|
|
MCP-50
Maximum pumping volume : 50 micro liters/shot
Adjustable pumping volume limits : 5 - 50 micro liters
MLP-200P
Maximum pumping volume : 200 micro liters/shot
Adjustable pumping volume limits : 10 - 200 micro liters
NRP-500P
Maximum pumping volume : 500 micro liters/shot
Adjustable pumping volume limits : 50 - 500 micro liters
PKP-500P
Maximum pumping volume : 500 micro liters/shot
Adjustable pumping volume limits : 50 - 500 micro liters |
|
| GPD and SPD Pneumatic pumps provide a compact, variable speed, air powered drive for Q and RH pumps. Compressed air has proven to be an ideal power alternative when an electrical hook up is not readily available. Stroke rate is easily varied by regulating the air flow to the drive. |
|
Stroke Adjuster is made more compact and adjustment is simplified with an internally threaded design. The positive locking machine to hold stroke length is readily accessible and easy to operate.
The Pneumatic Piston and Fluid Plunger Assembly is guided at both ends on TFE composite suppliers of bearings ensuring concentric movement of the plunger though the professional seals.
The clearance between the return spring and plunger has been optimized to eliminate any possible contact.
A true double sealing arrangement is used so that secondary seal containment is provided.
Lubrication has been simplified with the use of synthetic grease. The lubrication chamber is filled once over the life of the seals.
The bleeder is equipped with a barbed professional fitting for plastic tubing so that the fluid bled from the fluid chamber can be collected.
Both the discharge and suction non return valves have tough TFE composite seats for long life and positive sealing.
Threaded port after the secondary seal provides for the indication, collection or containment of any seal leakage. |
|
| Maintaining the same size footprint of previous models, the sleek new pump offers a number of product enhancements to provide longer life and product convenience, while the physical design signifies supreme quality. The newly redesigned housing improves the drive’s heat transfer properties, as it generates heat farther away from the electronic components to maintain the long-term integrity of the PC Board. Industrial electrical connector attachments have been repositioned to the front of the pump for easy access. With a new clear cover the face of the pump is shielded from exposure to corrosive substances yet lifts easily for convenient access, allowing operators to view dial settings for fine-tuning output. In addition, the pump and liquid end mounting geometries have been improved for enhanced connections. For more information please contact LMI Milton Roy |
|
The Series G Metering Pump is designed for high output applications. The drive incorporates a variable eccentic design which ensures smooth output and reduces system shock. The mechanically actuated industrial diaphragm reduces the possibility of hydraulic oil contamination of process liquid which makes this an ideal pump for professional water treatment applications. DC variable speed drives are available for external control and automation.
The SD & SG measuring pumps offer a high level of reliability with outstanding value for applications up to 175 psi (12 Bar). |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
High discharge accuracy
The main components such as the plunger and cylinder are processed with high precision of micron order, so it is possible to obtain high discharge accuracy. (Discharge accuracy : }0.5%) By changing the angle of the pumping head it is possible to freely adjust the discharge amount between 0 and maximum discharge.
Excellent corrosion resistance
Materials such as silicon carbide (SiC), fluorocarbon polymers (PTFE) and stainless casting (SCS14) with excellent resistance to corrosion are used for parts that come in contact with the fluid. This makes it possible to use the pumps for handling a wide range of chemicals.
Dispense into a vacuum condition and removal from a high-pressure condition
Since there are no suction and discharge cocks, it is possible to directly dispense a constant amount of fluid in a vacuum (negative pressure) without using a supplier of solenoid. Constant-volume dispensing is also possible if suction side is pressurized.
Capable of handling slurries and highly viscous fluids
The unique valveless construction and the excellent resistance to wear of SiC, it is possible to handle slurries with fast precipitation speed as well as abrasive slurries. Also, the pumps are capable of smoothly pumping highly viscous fluids up to a maximum viscosity of 20,000 mPa¥s.
Note: The discharge accuracy drops for viscous fluids with a viscosity of 500 mPa¥s or greater. Contact this company for details.
|
|
The FEM diaphragm dosing pump has been specially developed
in order to accurately dose small quantities of liquid over a long
period of time whereby two of its most distinctive features are its
compact size and robustness (pump and electronics). The FEM
pump and electronics makes a complete dosing system which
is suitable for both simple as well as complex applications. With
the functions „quasi continuous flow“ and „batch dispensing“ the
FEM diaphragm pumping differentiates itself from pumps based on
alternative technologies eg. piston, gear, industrial syringe and supplier of peristaltic pumps. Other interesting features are its high reliability, a
favourable purchasing price and low maintenance costs.
KNF has developed a specially programmed electronic control
module so that the integrated coil valve and the movements
of the diaphragm are exactly synchronised. This results in an
exact dosing which is gentle and low in pulsation. In addition
to these unique pump characteristics the control module also
allows a wide range of control possibilities to be used eg.
serial interfaces.
The dosing pump is self priming, maintenance free and can
be run dry |
|
High Volume
CHEM-PRO C2 features: PVDF Pump Head, Adapters and double ball valves suppliers; digital LCD touch pad control; variable speed motor adjustable from 1 - 100% in 1% increments, smooth operation no hammering; priming/de-gassing cock aids priming under pressure and removing gas from system; powder coated aluminum housing, NEMA 4X / lp66 rated enclosure; Full stroke every time avoids vapor lock; DFD built-in Leakage detection System senses diaphragm failure and shuts off pump.
CHEM-PROTM C2 can be ordered with low flow diaphragm for output to 97 LPH. The high flow diaphragm has maximum 142.7 LPH output, both have 10.3 bar maximum working pressure. |
|
Compact and Economical
CHEM-FEED® Proportioning pumps are suitable for a variety of water and industrial wastewater treatment applications. CHEM-FEED pumps feature Blue-White's exclusive Heavy Duty Pump Head with, double ball inlet and outlet cartridge type ceramic industrial check valves, constructed of tough PVDF. Each cock has two ceramic checks, and is double sealed with Viton and TFE/P o-rings. The double suppliers of ball valve design provides enhanced priming, and is exceptional for purging air and gas. Several models are offered in a wide range of output capabilities, voltage options and material variations. In addition, CHEM-FEED pumps can be customized for volume purchasers with purchase order contracts. |
|
| These pumps with mechanically actuated dual diaphragms bring the advantages and security of the industrial diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price. |
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control |
|
The MultiFertic® injection pump are heavy duty, high precision pumps for chemicals products and additives, made up of one driving module and 1 to 4 injection modules for 25 to 500 l/h. - 7.5 to 150 GPH
In the same injector can be connected several injection modules to apportion different products (INDEPENDENT INJECTION) or to increase the injection flow. By increasing the number of modules in the same injector, a higher flow regularity is obtained, whereby in the 4 modules model an actually continuous flow is obtained. |
|
Our new SELF SERVICE diesel fuel dispensers have been designed on the basis of in-depth studies of users' requirements.
Here is what users are looking for:
- Sturdy make and attractive design. The dispenser should be solid, but that doesn't mean it has to be unsightly.
- Fast refuelling.
- Accuracy and reliability. The on-board flow-meter must be precise and consistent over time.
- Must allow data management and select authorized users.
- Must be connectible to a PC for exporting data files and capable of running programmes that keep track of all refuellings performed.
- On-board professional printer for issuing receipts.
- Level-gauge showing current tank levels.
- Professional filter for separating any water contained in the diesel fuel.
- Competitive prices.
In reply to these needs we have produced a complete range of newly-designed fuel dispensers. Modern and attractive, they are compact and sturdy, and thanks to a lockable front door on professional hinges, the internal organs can be easily accessed for maintenance. |
|
Features:
- Integrated unit for layout flexibility
- Smooth operation of open sump and vertical inlet which prevents air locking
- Cantilever design without submerged bearings suppliers or shaft seal rings
- Bearing assembly with double protection sealing arrangement to prevent ingress of slurry
- Wear parts are available in a variety of different materials and are fully interchangeable
- Simplified maintenance features |
|
LMI pumps
Electromagnetic pumps with corrosion-resistant plastic housing and mechanically actuated industrial diaphragm or plunger liquid end pumps: accurate and automated pumps in the largest versatile range on the market today.
- Flow rates up to 76 l/h and pressure up to 135 bar:
* Versatile programmable models,
* Pumps with separately adjustable stroke lengths and rates,
* Micro-processor controlled functions,
* Proportional dosing,
* High-viscosity dosing pumps (HV),
* Compact, light and economic.
- Precision dosing even at flow rates of 0 to 10 l/h
LMI's electronically actuated pumps are light, reliable and suit a broad range of applications. |
|
Dosing systems for the water treatment includes manufacturers of solenoid metering pumps suppliers, motor driven mechanical pumps, measure and control instruments and a wide range of accessories. Our long experience has led us to develop specific products for the differrent applications on the various markets of which both SEKO and its customers have been leaders for years.
The design of metering units with tanks, industrial stirrers, metering pumps and theiraccessories, together with systems for the automatic polyelectrolite preparationcomplete the range of products based increasingly on an approach oriented on Custumers needs.
Electronic Dosing Systems
The high frequency oft he dosing pulses and the great chemical compatibility of the components make these pumps extremely precise and versatile products.Thanks to their microprocessor-based electronics, they adapte easily to any dosing requirement.
Motor Driven Pumps
The new range of our motor driven pumps features a high level of reliability and accuracy.Tough and plain, they guarantee excellent quality in time. |
|
High speed operation
Up to 360 strokes per minute results in high resolution chemical feed, elimination of slug-feed effects.
Compact size
Ideal for OEM specifications, ES pumps are small, quiet, and lightweight.
Double globe check valves
The ball, industrial seat and guide assembly ensures a tight industrial seal to prevent loss of prime.
Long lasting industrial diaphragm
PTFE laminate over EPDM is molded onto a solid core. A retainer plate is provided to minimize flow rate changes as pressure varies.
|
|
The QDX High Flow Hazardous Duty pump is designed for use in commercial, industrial, and laboratory hazardous applications. Accommodates flows up to 2200 ml/min. The QDX utilizes the FMI Adapter Kit P56C and a Class I, Group D, Class II, Groups E, F, and G, NEMA frame 56 face-mount motor.
The QSYX Low Flow Hazardous pump is coupled to Class I, Group D, synchronous motor suppliers for the ultimate stroke to stroke accuracy. Accommodates flows up to 92 ml/mim. |
|
The Milroyal has been recognized as the most reliable and robust industrial duty measurement pump since its introduction. The flexibility of various liquid end designs, availability of "custom engineered" modifications, and a wide range of flows and pressure capability, the Milroyal family of pumps is capable of meeting most any application.
GENERAL SPECIFICATIONS
/- 1% Steady State Accuracy over a 10:1 Turndown (w/constant speed drive)
Continuous Duty / Severe Service Design
Polar Crank Drive Design
Rugged Cast Iron Gear Housing
Modular Design
Multiplex Capability
Variable Stroke Length (non-last motion)
Integral Pressure Lubrication System
Hydraulically Actuated Metallic Industrial diaphragm
Mechanically Actuated Refill Cock (MARS)
No Process Side Contour Plate
Pressures up to 4,350 psig (300 bar g)
Flows up to 2,657 gph (10,058 lph)
Meets API Standard 675
|
|
SEKO offers a whole range of plunger and diaphragm pumps manufacturer with flow rates from 0,6 l/h to 60000 l/h and pressures up to 1200 bar.
Plunger Piston Proportioning pumps designed according to API 675 Standards.
Mechanical Diaphragm Metering Pumps, a seal-less solution for low pressure dosing applications.
Hydraulic Diaphragm Metring Pumps with two parallel diaphragms installed without intermediate liquid; even if one diaphragm ruptures the second one ensures the pump operation. All pumps with mechanical return mechanism are designed according to API 675 Standards.
Manufacturer of process pumps: reciprocating Triplex pumps are designed according to API 674 Standards.
Dosing Systems
SEKO has linked its success to a wide range of industrial fields by supplying complete dosing and injection packages throughout the world. SEKO is organised as a true technical consultancy service to each individual customer from the preliminary stage of the project throught to the ordering, design, manufacturing and after sales technical assistance.
SEKO currently supplies pumps and systems to the water treatment, steel, ceramics, foodstuff, paper, textile, pharmaceutical industries, oil & gas, energy and petrochemical.
|
|
| The ElectroFertic®2000 dosing pump is an electric piston dosing pump made up of a driving module and one or two injection modules of 500, 750, 1000 l/h (132, 198,234 GPH) with electronic regulation by means of an industrial inverter |
|
| Used wherever precise flow control, particularly at high pressures, is required. Flow rates from 0.02 to 144 mL/min at pressures to 5000 psi in a variety of models. HP Series pumps provide for flow rate control via precision micrometer; VS Series pumps provide flow rate control, either locally or remotely, via motor speed variation. Corrosion resistant materials, including metal-free versions. |
|
|
|
Dispensing pumps
