|
|
Electric motor solution for the individual sit-stand work station. Stepless height adjustment with customer specific stroke.
- drive for the assembly in the table base
- simple mounting
- integrated position measuring system
- single telescopic function
- synchronisation with up to 26 actuators |
|
LINAK has several years of experience in development and manufacture of 12 V DC and 24 V DC actuators. The LINAK actuator range offers lifting capacities ranging from 200 N to 10.000 N. All the linear actuators consists of three principal elements: A motor, a gear and a spindle including nut. The actuator is the unit, which converts the
operating voltage from the control box into a linear movement. Some of the actuators are available in black and grey. Please contact your LINAK representative for further specifications. |
|
Moog provides a wide range of custom Electro-Mechanical actuators for total axis control for industrial applications. All of our actuation products have the proven reliability and precision required for high performance motion control and long service life. Available in multiple sizes and with a selection of Moog-designed and built servomotors and drive electronics, actuation products are built to meet customers requirements.
Moogs total axis control solutions include the all-steel 887 series with the ability to accommodate peak forces of 350 kN [80,000 lbs.] It is a fully validated, tested option for the most demanding applications.
|
|
ALI3
ALI3F (with integrated limit switches)
Max Force: 6.000 N
Speed: up to 35 mm/s
Power source: 12-24-36 Vdc / 230-400 Vac 50-60 Hz
Stroke length: up to 700 mm
Accessories: magnetic limit switches, integrated limit switches,
rotative potentiometer, encoder, safety nut |
|
ALI5 90ฐ Version
ALI5 P parallel Version
ALI5 A in line Version
This new family of actuators allow a large number of combinations Forse - speed - dimensions - duty cycle, to meet most applications riquirements.
Max force: 15 kN
Max speed: 250 mm/s
Stroke: up to 1400 mm
1ph-3ph Vac - 90 Vdc
Accessories: magnetic limit switches, mechanical limit switches, encoder, safety clutch, safety nut
|
|
ALI1
ALI1F (with integrated limit switches)
Max Force: 1.200 N
Speed: up to 90 mm/s
Power source: 12 - 24 - 36 Vdc
Stroke length: up to 300 mm
Accessories: integrated limit switches, encoder
|
|
L02 L03
Max Force: 2.000 N Max Force: 5.000 N
Speed: up to 100 mm/s Speed: up to 30 mm/s
Power supply: 12 - 24 Vdc Power supply: 12 - 24 Vdc
Stroke: up to 800 mm Stroke: up to 700 mm
Accessories: magnetic limit switches, encoder, safety nut |
|
EC1 EC2 EC3 EC4 EC5
Max force: 5 KN /
/ 50 kN
Max speed: 230 mm/s /
/ 15 mm/s
Stroke: up to 650 mm /
/ 1800 mm
1ph-3ph Vac
Accessories: integrated limit switches, rotative potentiometer, encoder, hand-wheel
|
|
Electrical Actuator Microwin
SUPPLY VOLTAGE 12๗24V
NO LOAD SPEED 3๗36MM/S
NOMINAL LOAD 100๗1200N
DUTY CYCLE S3 30๗80%
STANDARD STROKES
50-100-120-150-200-250-300 |
|
ELECTRICAL ACTUATORS
Supply voltage 12๗24V
No load speed 3๗36mm/s
Nominal load 100๗1200N
Duty cycle S3 30๗80%
Standard strokes
50-100-120-150-200-250-300 |
|
| The Rolaram actuators are designed for precision applications which require high speed and medium to high duty with loads up to 400kN. There are 8 standard models to choose from with varying options, however all units can be customised to suit your exact application requirements. |
|
RACO's positioning actuator is equipped with RACO's intelligent positioning motor, a three phase asynchronous motor with servo characteristics.The frequency converter, the position sensors and the position control is built into RACO's positioning motor.
This motor is available in three sizes up to 0.5 kW and it can be adapted to all of RACO's electric actuators, rotary actuators and linear actuators with this range of performance.
Benefits:
positioning regulation with position sensors
full motor protection with current and temperature monitoring
all of the sensor and control components built into the motor
programming with PC mask program
in conformity with electromagnetic directive
positioning accuracy < 0.5 mm
50% cost savings in comparison to conventional servos
stop braking as optional equipment
|
|
A comprehensive selection of linear actuators with programmable control of force, position & velocity. Standard resolution on all SMAC actuators is 5micron with 1micron and half micron options available. They also have a 100% Data Capture & Feed Back Facility.
They are designed to perform at exceptionally high speeds and with a very high degree of accuracy & repeatability. This makes them ideal for a wide range of positioning, measuring, inspection and pick & place applications. Particularly where 100% verification is required. |
|
| Integrated modular actuators Series Compact, particularly adapted to the harsh environments. - adjustable electric race ends and/or potentiometer of recopy integrated protector IP65 on request motorizations cd. - mono or TRI. |
|
Linear electric actuator with integral microprocessor
> Limit switch control
> 7 mm/sec 8000 N (standard)
> 14 mm/sec 6000 N (optional)
> High performance
> Quiet running
> Robust
> Insulation class 1
> Certified to IEC 601-1 |
|
High Performance Electric Servoactuator INDACTฎ According to ISO 6431
ISOMOVE (1-20KN)
Electric servoactuator by the means of a precision Ball Screw, suitable for high performance applications, featuring overall dimensions and mounting style according to ISO 6431.
6 different sizes (IM032, IM040, IM050, IM063, IM080, IM100).
Wide range of Ball Screw Pitch selection for each size.
3 different motor drive solutions (Stepper, Brushless, Custom).
D version featuring axial / direct mounted motor drive with zero-backlash coupling.
R version featuring reduced / parallel mounted motor drive with zero-backlash belt gear.
2 different reduction ratio (1:1, 2:1 R version only).
Max Nominal Thrust up to 20KN.
Max Linear Speed up to 1600mm/sec.
High Efficiency mechanical transmission.
Duty Cycle 100%.
Grease lubricated.
Modular design according to ISO 6431 allows for maximum adaptability to the widest range of industrial high performance applications.
Wide range of standard accessories/features to ISO 6431.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator INDACTฎ Orthogonal-mounted Motor Series
ECO (1,7-100KN)
Electric Linear Actuator featuring orthogonal-mounted motor, by the means of worm-screw/worm-wheel gear, for industrial application.
6 different sizes (ECO1, ECO2, ECO3, ECO25, ECO50, ECO100).
Wide range of linear Force/Speed for each size.
Max nominal force up to 100KN.
Max linear speed up to 78mm/sec.
T version, featuring Trapezoidal spindle (self-locking).
S version, featuring Ball Screw spindle (high efficiency).
Powered by AC/3-phases/IP54 motor.
Duty Cycle 25%.
Grease lubricated.
Strong industrial design provides maximum performance together with highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
Electric Linear Actuator INDACTฎ In-line Series
ECU (0,25-60KN)
High efficiency Electric Linear Actuator, featuring in-line motorization (with or without precision planetary gearbox), suitable for industrial applications.
5 different sizes (ECU0, ECU4, ECU5, ECU6, ECU7).
Wide range of linear Force/Speed couples for each size.
Max nominal force up to 60KN.
Max linear speed up to 466mm/sec.
T version, featuring Trapezoidal spindle (self-locking).
S version, featuring Ball Screw spindle (high efficiency).
Powered by AC/3-phases/IP54 motor.
Duty Cycle 25%.
Grease lubricated.
Strong industrial design provides maximum performance together with the highest reliability, to meet the toughest requirements in harsh and severe environments.
Wide range of standard accessories/features.
Special execution on request, please contact Setec Group Italy.
|
|
| MXE electric screw actuators are available in two bearing selections. Solid bearing design optimizes stress distribution for optimal performance. Profiled rail design uses THK Caged Ball technology to reduce friction and extend actuator life. Maximum loads range from 70 to 1472 lbs depending on options selected. Strokes available in any incremental length up to 120" depending on body size and screw/nut choice. |
|
Venture DC Linear Actuators are available in both Acme Screw or Ball Screw versions and combine our Quality Linear Actuators with a DC voltage electric gearmotor providing a ready to install electric linear drive system.
Standard strokes 4, 8, 12, 18, 24, 32, 36, 40 and 52 inches (custom lengths available)
30% duty cycle motor rating
Optional features include;
Clutch
Limit switches
Reed, Hall Effect, Potentiometer and other sensor options
3000 lb static capacity / up to 1500 lb dynamic load
Lifetime lubrication
Designed for outdoor use
Compression or tension loads
Trunnion, Clevis, or Tube clamp mounting
High strength steel tube assembly with all-steel load support members
Long Life Acme or Ball Screw
12VDC, 24VDC, 36VDC, 90VDC, or 120VDC for rectified 120VAC Gearbox Designs |
|
Compared to their pneumatic and hydraulic "colleagues" electric linear actuators have many advantages:
- constant stroke speed
- no loss of oil
- mechanical self-locking
- almost maintenance-free
- exact positioning
- large number of speed variants
Whenever optimum combinations of load, speed, installation dimensions, precision and robustness are sought, elero actuator and control systems have the answer.
Even in extreme operating conditions such as:
- heat
- cold
- dirt accumulation
our actuators are trouble-free. Special models can be made of stainless steel, for example,to enable our products to be used outside or in the food industry. |
|
The VecTac VT ball screw linear actuator series was developed to provide a high quality, rugged and durable linear actuator for lower force applications. Using a rugged aluminum alloy cylinder and chrome plated heavy wall steel piston, this fluid power replacement linear actuator insures rigid alignment of critical bearing supports.
The VecTac VT fluid power replacement linear actuator was designed to accept virtually any manufacturers' motor, has a thrust range of 400 to 2,000 lbs. and a linear velocity capability of up to 40 inches per second.
Its relative small size as well as the ease of adapting to any of the standard unit mounting styles makes the series of VT electric linear actuators a good fit in most linear motion industrial applications. Hall effect and Reed type limit switches are available. |
|
Globe Motors designs and manufactures precision linear actuators to meet both MIL-spec and industrial requirements. Custom designed to meet your specific application, these units offer:
-- reliable, consistent stroke
-- smooth push-pull linear force
-- tension/compression ranges to 3,000 lbs.
-- rates of travel to suit your needs, and
-- mechanical stops or positional feedback systems
Our experienced design and application engineers stand ready to assist you with motion control solutions; and our vertically integrated manufacturing provides the capability needed to deliver prototypes quickly.
|
|
PLEASE USE ENGLISH FOR ALL ENQUIRIES.
Enquiries written in other languages will not be answered. |
|
| There is an increasing demand for comfort, economic efficiency, safety and respect for ecological values, factors which drive forward the increased use of precisely controllable systems. This requires compact, high-performance and robust actuators at the interface between the control mechanism and the controlled processes. SONCEBOZ linear actuators are eminently suitable for such tasks. This is why they handle idling control in vehicle engines, control three-way valves in heating and air conditioning equipment or control physical processes in medical analysis appliances. All this is possible only because of the robustness against environmental influences, the high precision and proven quality of actuators. |
|
| These electric linear actuators, based on standard NEMA stepper motors, offer finer resolution, higher thrust, higher speed, and longer lifetime compared to our T-LA series of linear actuators. Each electric linear actuator includes 30cm of cable wired to a mini-din 8 connector for use with our T-CD series stepper motor controller (shown above driving an NA11B-30 actuator) which must be purchased separately. Linear actuators have a built in magnetic home sensor. In addition to the listed linear actuators, we have larger NEMA size 17 and 23 actuators available in the same ranges of travel. Size 23 offers up to 200 lb force. Please contact us for more details if you are interested in higher thrust. |
|
|
|
Electric actuators
